pismo readme.txt

Spansion公司提供的标准的flash芯片驱动的源代码。

                            LLD Command Line Tool
                                Version 5.1.2
                                February 2005


Please refer to the LLD Command Line Tool manual and the PISMO PCI Quick Start
Guide for more information on the Low Level Driver (LLD) and the PISMO PCI 
flash memory card.  The following are release notes intended for users who are
already familiar with the LLD and the PISMO PCI card.

If there are multiple PCI PISMO cards in the system, each start address and
memory window or bank size will be displayed.  The last card detected will be
the default card used by the LLD command line.  The LLD command line tool now
implements validity checks on the parameters supplied at the command line.  To
access a PCI card other than the default, use the SetBaseAddress and 
SetWindowSize commands.  Enter the desired start address and length that were
displayed during intialization.  Both parameters should be entered as
hexadecimal numbers without any radix designation (i.e. "0x" or "h").  These
commands have no validity checks, so please use caution with these commands.