ptrace.h

来自「Linux Kernel 2.6.9 for OMAP1710」· C头文件 代码 · 共 146 行

H
146
字号
#ifndef _PPC_PTRACE_H#define _PPC_PTRACE_H/* * This struct defines the way the registers are stored on the * kernel stack during a system call or other kernel entry. * * this should only contain volatile regs * since we can keep non-volatile in the thread_struct * should set this up when only volatiles are saved * by intr code. * * Since this is going on the stack, *CARE MUST BE TAKEN* to insure * that the overall structure is a multiple of 16 bytes in length. * * Note that the offsets of the fields in this struct correspond with * the PT_* values below.  This simplifies arch/ppc/kernel/ptrace.c. */#ifndef __ASSEMBLY__struct pt_regs {	unsigned long gpr[32];	unsigned long nip;	unsigned long msr;	unsigned long orig_gpr3;	/* Used for restarting system calls */	unsigned long ctr;	unsigned long link;	unsigned long xer;	unsigned long ccr;	unsigned long mq;		/* 601 only (not used at present) */					/* Used on APUS to hold IPL value. */	unsigned long trap;		/* Reason for being here */	/* N.B. for critical exceptions on 4xx, the dar and dsisr	   fields are overloaded to hold srr0 and srr1. */	unsigned long dar;		/* Fault registers */	unsigned long dsisr;		/* on 4xx/Book-E used for ESR */	unsigned long result; 		/* Result of a system call */};#endif /* __ASSEMBLY__ */#ifdef __KERNEL__#define STACK_FRAME_OVERHEAD	16	/* size of minimum stack frame *//* Size of stack frame allocated when calling signal handler. */#define __SIGNAL_FRAMESIZE	64#ifndef __ASSEMBLY__#define instruction_pointer(regs) ((regs)->nip)#ifdef CONFIG_SMPextern unsigned long profile_pc(struct pt_regs *regs);#else#define profile_pc(regs) instruction_pointer(regs)#endif#define user_mode(regs) (((regs)->msr & MSR_PR) != 0)#define force_successful_syscall_return()   \	do { \		current_thread_info()->local_flags |= _TIFL_FORCE_NOERROR; \	} while(0)/* * We use the least-significant bit of the trap field to indicate * whether we have saved the full set of registers, or only a * partial set.  A 1 there means the partial set. * On 4xx we use the next bit to indicate whether the exception * is a critical exception (1 means it is). */#define FULL_REGS(regs)		(((regs)->trap & 1) == 0)#define IS_CRITICAL_EXC(regs)	(((regs)->trap & 2) == 0)#define TRAP(regs)		((regs)->trap & ~0xF)#define CHECK_FULL_REGS(regs)						      \do {									      \	if ((regs)->trap & 1)						      \		printk(KERN_CRIT "%s: partial register set\n", __FUNCTION__); \} while (0)#endif /* __ASSEMBLY__ */#endif /* __KERNEL__ *//* * Offsets used by 'ptrace' system call interface. * These can't be changed without breaking binary compatibility * with MkLinux, etc. */#define PT_R0	0#define PT_R1	1#define PT_R2	2#define PT_R3	3#define PT_R4	4#define PT_R5	5#define PT_R6	6#define PT_R7	7#define PT_R8	8#define PT_R9	9#define PT_R10	10#define PT_R11	11#define PT_R12	12#define PT_R13	13#define PT_R14	14#define PT_R15	15#define PT_R16	16#define PT_R17	17#define PT_R18	18#define PT_R19	19#define PT_R20	20#define PT_R21	21#define PT_R22	22#define PT_R23	23#define PT_R24	24#define PT_R25	25#define PT_R26	26#define PT_R27	27#define PT_R28	28#define PT_R29	29#define PT_R30	30#define PT_R31	31#define PT_NIP	32#define PT_MSR	33#ifdef __KERNEL__#define PT_ORIG_R3 34#endif#define PT_CTR	35#define PT_LNK	36#define PT_XER	37#define PT_CCR	38#define PT_MQ	39#define PT_FPR0	48	/* each FP reg occupies 2 slots in this space */#define PT_FPR31 (PT_FPR0 + 2*31)#define PT_FPSCR (PT_FPR0 + 2*32 + 1)/* Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go */#define PTRACE_GETVRREGS	18#define PTRACE_SETVRREGS	19/* Get/set all the upper 32-bits of the SPE registers, accumulator, and * spefscr, in one go */#define PTRACE_GETEVRREGS	20#define PTRACE_SETEVRREGS	21#endif

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?