io.h

来自「Linux Kernel 2.6.9 for OMAP1710」· C头文件 代码 · 共 664 行 · 第 1/2 页

H
664
字号
#ifndef __ALPHA_IO_H#define __ALPHA_IO_H#ifdef __KERNEL__#include <linux/config.h>#include <linux/kernel.h>#include <asm/compiler.h>#include <asm/system.h>#include <asm/pgtable.h>#include <asm/machvec.h>#include <asm/hwrpb.h>/* The generic header contains only prototypes.  Including it ensures that   the implementation we have here matches that interface.  */#include <asm-generic/iomap.h>/* We don't use IO slowdowns on the Alpha, but.. */#define __SLOW_DOWN_IO	do { } while (0)#define SLOW_DOWN_IO	do { } while (0)/* * Virtual -> physical identity mapping starts at this offset */#ifdef USE_48_BIT_KSEG#define IDENT_ADDR     0xffff800000000000UL#else#define IDENT_ADDR     0xfffffc0000000000UL#endif/* * We try to avoid hae updates (thus the cache), but when we * do need to update the hae, we need to do it atomically, so * that any interrupts wouldn't get confused with the hae * register not being up-to-date with respect to the hardware * value. */static inline void __set_hae(unsigned long new_hae){	unsigned long flags;	local_irq_save(flags);	alpha_mv.hae_cache = new_hae;	*alpha_mv.hae_register = new_hae;	mb();	/* Re-read to make sure it was written.  */	new_hae = *alpha_mv.hae_register;	local_irq_restore(flags);}static inline void set_hae(unsigned long new_hae){	if (new_hae != alpha_mv.hae_cache)		__set_hae(new_hae);}/* * Change virtual addresses to physical addresses and vv. */#ifdef USE_48_BIT_KSEGstatic inline unsigned long virt_to_phys(void *address){	return (unsigned long)address - IDENT_ADDR;}static inline void * phys_to_virt(unsigned long address){	return (void *) (address + IDENT_ADDR);}#elsestatic inline unsigned long virt_to_phys(void *address){        unsigned long phys = (unsigned long)address;	/* Sign-extend from bit 41.  */	phys <<= (64 - 41);	phys = (long)phys >> (64 - 41);	/* Crop to the physical address width of the processor.  */        phys &= (1ul << hwrpb->pa_bits) - 1;        return phys;}static inline void * phys_to_virt(unsigned long address){        return (void *)(IDENT_ADDR + (address & ((1ul << 41) - 1)));}#endif#define page_to_phys(page)	page_to_pa(page)/* This depends on working iommu.  */#define BIO_VMERGE_BOUNDARY	(alpha_mv.mv_pci_tbi ? PAGE_SIZE : 0)/* Maximum PIO space address supported?  */#define IO_SPACE_LIMIT 0xffff/* * Change addresses as seen by the kernel (virtual) to addresses as * seen by a device (bus), and vice versa. * * Note that this only works for a limited range of kernel addresses, * and very well may not span all memory.  Consider this interface  * deprecated in favour of the mapping functions in <asm/pci.h>. */extern unsigned long __direct_map_base;extern unsigned long __direct_map_size;static inline unsigned long virt_to_bus(void *address){	unsigned long phys = virt_to_phys(address);	unsigned long bus = phys + __direct_map_base;	return phys <= __direct_map_size ? bus : 0;}static inline void *bus_to_virt(unsigned long address){	void *virt;	/* This check is a sanity check but also ensures that bus address 0	   maps to virtual address 0 which is useful to detect null pointers	   (the NCR driver is much simpler if NULL pointers are preserved).  */	address -= __direct_map_base;	virt = phys_to_virt(address);	return (long)address <= 0 ? NULL : virt;}/* * There are different chipsets to interface the Alpha CPUs to the world. */#define IO_CONCAT(a,b)	_IO_CONCAT(a,b)#define _IO_CONCAT(a,b)	a ## _ ## b#ifdef CONFIG_ALPHA_GENERIC/* In a generic kernel, we always go through the machine vector.  */#define REMAP1(TYPE, NAME, QUAL)					\static inline TYPE generic_##NAME(QUAL void __iomem *addr)		\{									\	return alpha_mv.mv_##NAME(addr);				\}#define REMAP2(TYPE, NAME, QUAL)					\static inline void generic_##NAME(TYPE b, QUAL void __iomem *addr)	\{									\	alpha_mv.mv_##NAME(b, addr);					\}REMAP1(unsigned int, ioread8, /**/)REMAP1(unsigned int, ioread16, /**/)REMAP1(unsigned int, ioread32, /**/)REMAP1(u8, readb, const volatile)REMAP1(u16, readw, const volatile)REMAP1(u32, readl, const volatile)REMAP1(u64, readq, const volatile)REMAP2(u8, iowrite8, /**/)REMAP2(u16, iowrite16, /**/)REMAP2(u32, iowrite32, /**/)REMAP2(u8, writeb, volatile)REMAP2(u16, writew, volatile)REMAP2(u32, writel, volatile)REMAP2(u64, writeq, volatile)#undef REMAP1#undef REMAP2static inline void __iomem *generic_ioportmap(unsigned long a){	return alpha_mv.mv_ioportmap(a);}static inline void __iomem *generic_ioremap(unsigned long a, unsigned long s){	return alpha_mv.mv_ioremap(a, s);}static inline void generic_iounmap(volatile void __iomem *a){	return alpha_mv.mv_iounmap(a);}static inline int generic_is_ioaddr(unsigned long a){	return alpha_mv.mv_is_ioaddr(a);}static inline int generic_is_mmio(const volatile void __iomem *a){	return alpha_mv.mv_is_mmio(a);}#define __IO_PREFIX		generic#define generic_trivial_rw_bw	0#define generic_trivial_rw_lq	0#define generic_trivial_io_bw	0#define generic_trivial_io_lq	0#define generic_trivial_iounmap	0#else#if defined(CONFIG_ALPHA_APECS)# include <asm/core_apecs.h>#elif defined(CONFIG_ALPHA_CIA)# include <asm/core_cia.h>#elif defined(CONFIG_ALPHA_IRONGATE)# include <asm/core_irongate.h>#elif defined(CONFIG_ALPHA_JENSEN)# include <asm/jensen.h>#elif defined(CONFIG_ALPHA_LCA)# include <asm/core_lca.h>#elif defined(CONFIG_ALPHA_MARVEL)# include <asm/core_marvel.h>#elif defined(CONFIG_ALPHA_MCPCIA)# include <asm/core_mcpcia.h>#elif defined(CONFIG_ALPHA_POLARIS)# include <asm/core_polaris.h>#elif defined(CONFIG_ALPHA_T2)# include <asm/core_t2.h>#elif defined(CONFIG_ALPHA_TSUNAMI)# include <asm/core_tsunami.h>#elif defined(CONFIG_ALPHA_TITAN)# include <asm/core_titan.h>#elif defined(CONFIG_ALPHA_WILDFIRE)# include <asm/core_wildfire.h>#else#error "What system is this?"#endif#endif /* GENERIC *//* * We always have external versions of these routines. */extern u8		inb(unsigned long port);extern u16		inw(unsigned long port);extern u32		inl(unsigned long port);extern void		outb(u8 b, unsigned long port);extern void		outw(u16 b, unsigned long port);extern void		outl(u32 b, unsigned long port);extern u8		readb(const volatile void __iomem *addr);extern u16		readw(const volatile void __iomem *addr);extern u32		readl(const volatile void __iomem *addr);extern u64		readq(const volatile void __iomem *addr);extern void		writeb(u8 b, volatile void __iomem *addr);extern void		writew(u16 b, volatile void __iomem *addr);extern void		writel(u32 b, volatile void __iomem *addr);extern void		writeq(u64 b, volatile void __iomem *addr);extern u8		__raw_readb(const volatile void __iomem *addr);extern u16		__raw_readw(const volatile void __iomem *addr);extern u32		__raw_readl(const volatile void __iomem *addr);extern u64		__raw_readq(const volatile void __iomem *addr);extern void		__raw_writeb(u8 b, volatile void __iomem *addr);extern void		__raw_writew(u16 b, volatile void __iomem *addr);extern void		__raw_writel(u32 b, volatile void __iomem *addr);extern void		__raw_writeq(u64 b, volatile void __iomem *addr);/* * Mapping from port numbers to __iomem space is pretty easy. *//* These two have to be extern inline because of the extern prototype from   <asm-generic/iomap.h>.  It is not legal to mix "extern" and "static" for   the same declaration.  */extern inline void __iomem *ioport_map(unsigned long port, unsigned int size){	return IO_CONCAT(__IO_PREFIX,ioportmap) (port);}extern inline void ioport_unmap(void __iomem *addr){}static inline void __iomem *ioremap(unsigned long port, unsigned long size){	return IO_CONCAT(__IO_PREFIX,ioremap) (port, size);}static inline void __iomem * ioremap_nocache(unsigned long offset,					     unsigned long size){	return ioremap(offset, size);} static inline void iounmap(volatile void __iomem *addr){	IO_CONCAT(__IO_PREFIX,iounmap)(addr);}static inline int __is_ioaddr(unsigned long addr){	return IO_CONCAT(__IO_PREFIX,is_ioaddr)(addr);}#define __is_ioaddr(a)		__is_ioaddr((unsigned long)(a))static inline int __is_mmio(const volatile void __iomem *addr){	return IO_CONCAT(__IO_PREFIX,is_mmio)(addr);}/* * If the actual I/O bits are sufficiently trivial, then expand inline. */#if IO_CONCAT(__IO_PREFIX,trivial_io_bw)extern inline unsigned int ioread8(void __iomem *addr){	unsigned int ret = IO_CONCAT(__IO_PREFIX,ioread8)(addr);	mb();	return ret;}extern inline unsigned int ioread16(void __iomem *addr){	unsigned int ret = IO_CONCAT(__IO_PREFIX,ioread16)(addr);	mb();	return ret;}extern inline void iowrite8(u8 b, void __iomem *addr){	IO_CONCAT(__IO_PREFIX,iowrite8)(b, addr);	mb();}

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?