menelaus.h

来自「Linux Kernel 2.6.9 for OMAP1710」· C头文件 代码 · 共 85 行

/*
 * Copyright (C) 2004 Texas Instruments, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
 */

#ifndef _MENELAUS_H
#define _MENELAUS_H

#define MENELAUS_REV		0x01
#define MENELAUS_VCORE_CTRL1	0x02
#define MENELAUS_VCORE_CTRL2	0x03
#define MENELAUS_VCORE_CTRL3	0x04
#define MENELAUS_VCORE_CTRL4	0x05
#define MENELAUS_VCORE_CTRL5	0x06
#define MENELAUS_DCDC_CTRL1	0x07
#define MENELAUS_DCDC_CTRL2	0x08
#define MENELAUS_DCDC_CTRL3	0x09
#define MENELAUS_LDO_CTRL1	0x0A
#define MENELAUS_LDO_CTRL2	0x0B
#define MENELAUS_LDO_CTRL3	0x0C
#define MENELAUS_LDO_CTRL4	0x0D
#define MENELAUS_LDO_CTRL5	0x0E
#define MENELAUS_LDO_CTRL6	0x0F
#define MENELAUS_LDO_CTRL7	0x10
#define MENELAUS_LDO_CTRL8	0x11
#define MENELAUS_SLEEP_CTRL1	0x12
#define MENELAUS_SLEEP_CTRL2	0x13
#define MENELAUS_DEVICE_OFF	0x14
#define MENELAUS_OSC_CTRL	0x15
#define MENELAUS_DETECT_CTRL	0x16
#define MENELAUS_INT_MASK1	0x17
#define MENELAUS_INT_MASK2	0x18
#define MENELAUS_INT_STATUS1	0x19
#define MENELAUS_INT_STATUS2	0x1A
#define MENELAUS_INT_ACK1	0x1B
#define MENELAUS_INT_ACK2	0x1C
#define MENELAUS_GPIO_CTRL	0x1D
#define MENELAUS_GPIO_IN	0x1E
#define MENELAUS_GPIO_OUT	0x1F
#define MENELAUS_BBSMS		0x20
#define MENELAUS_RTC_CTRL	0x21
#define MENELAUS_RTC_UPDATE	0x22
#define MENELAUS_RTC_SEC	0x23
#define MENELAUS_RTC_MIN	0x24
#define MENELAUS_RTC_HR		0x25
#define MENELAUS_RTC_DAY	0x26
#define MENELAUS_RTC_MON	0x27
#define MENELAUS_RTC_YR		0x28
#define MENELAUS_RTC_WKDAY	0x29
#define MENELAUS_RTC_AL_SEC	0x2A
#define MENELAUS_RTC_AL_MIN	0x2B
#define MENELAUS_RTC_AL_HR	0x2C
#define MENELAUS_RTC_AL_DAY	0x2D
#define MENELAUS_RTC_AL_MON	0x2E
#define MENELAUS_RTC_AL_YR	0x2F
#define MENELAUS_RTC_COMP_MSB	0x30
#define MENELAUS_RTC_COMP_LSB	0x31
#define MENELAUS_S1_PULL_EN	0x32
#define MENELAUS_S1_PULL_DIR	0x33
#define MENELAUS_S2_PULL_EN	0x34
#define MENELAUS_S2_PULL_DIR	0x35
#define MENELAUS_MCT_CTRL1	0x36
#define MENELAUS_MCT_CTRL2	0x37
#define MENELAUS_MCT_CTRL3	0x38
#define MENELAUS_MCT_PIN_ST	0x39
#define MENELAUS_DEBOUNCE1	0x3A

s32 menelaus_read(u8 reg);
s32 menelaus_write(u8 value, u8 reg);

#endif /* _MENELAUS_H */