ccwdev.h

来自「Linux Kernel 2.6.9 for OMAP1710」· C头文件 代码 · 共 177 行

H
177
字号
/* *  include/asm-s390/ccwdev.h *  include/asm-s390x/ccwdev.h * *    Copyright (C) 2002 IBM Deutschland Entwicklung GmbH, IBM Corporation *    Author(s): Arnd Bergmann <arndb@de.ibm.com> * *  Interface for CCW device drivers */#ifndef _S390_CCWDEV_H_#define _S390_CCWDEV_H_#include <linux/device.h>#include <linux/mod_devicetable.h>/* structs from asm/cio.h */struct irb;struct ccw1;/* simplified initializers for struct ccw_device: * CCW_DEVICE and CCW_DEVICE_DEVTYPE initialize one * entry in your MODULE_DEVICE_TABLE and set the match_flag correctly */#define CCW_DEVICE(cu, cum) 						\	.cu_type=(cu), .cu_model=(cum),					\	.match_flags=(CCW_DEVICE_ID_MATCH_CU_TYPE			\		   | (cum ? CCW_DEVICE_ID_MATCH_CU_MODEL : 0))#define CCW_DEVICE_DEVTYPE(cu, cum, dev, devm)				\	.cu_type=(cu), .cu_model=(cum), .dev_type=(dev), .dev_model=(devm),\	.match_flags=CCW_DEVICE_ID_MATCH_CU_TYPE			\		   | ((cum) ? CCW_DEVICE_ID_MATCH_CU_MODEL : 0) 	\		   | CCW_DEVICE_ID_MATCH_DEVICE_TYPE			\		   | ((devm) ? CCW_DEVICE_ID_MATCH_DEVICE_MODEL : 0)/* scan through an array of device ids and return the first * entry that matches the device. * * the array must end with an entry containing zero match_flags */static inline const struct ccw_device_id *ccw_device_id_match(const struct ccw_device_id *array,			const struct ccw_device_id *match){	const struct ccw_device_id *id = array;	for (id = array; id->match_flags; id++) {		if ((id->match_flags & CCW_DEVICE_ID_MATCH_CU_TYPE)		    && (id->cu_type != match->cu_type))			continue;		if ((id->match_flags & CCW_DEVICE_ID_MATCH_CU_MODEL)		    && (id->cu_model != match->cu_model))			continue;		if ((id->match_flags & CCW_DEVICE_ID_MATCH_DEVICE_TYPE)		    && (id->dev_type != match->dev_type))			continue;		if ((id->match_flags & CCW_DEVICE_ID_MATCH_DEVICE_MODEL)		    && (id->dev_model != match->dev_model))			continue;		return id;	}	return 0;}/* The struct ccw device is our replacement for the globally accessible * ioinfo array. ioinfo will mutate into a subchannel device later. * * Reference: Documentation/s390/driver-model.txt */struct ccw_device {	spinlock_t *ccwlock;	struct ccw_device_private *private;	/* cio private information */	struct ccw_device_id id;	/* id of this device, driver_info is					   set by ccw_find_driver */	struct ccw_driver *drv;		/* */	struct device dev;		/* */	int online;	/* This is sick, but a driver can have different interrupt handlers 	   for different ccw_devices (multi-subchannel drivers)... */	void (*handler) (struct ccw_device *, unsigned long, struct irb *);};/* Each ccw driver registers with the ccw root bus */struct ccw_driver {	struct module *owner;		/* for automatic MOD_INC_USE_COUNT   */	struct ccw_device_id *ids;	/* probe driver with these devs      */	int (*probe) (struct ccw_device *); /* ask driver to probe dev 	     */	void (*remove) (struct ccw_device *);					/* device is no longer available     */	int (*set_online) (struct ccw_device *);	int (*set_offline) (struct ccw_device *);	int (*notify) (struct ccw_device *, int);	struct device_driver driver;	/* higher level structure, don't init					   this from your driver	     */	char *name;};extern struct ccw_device *get_ccwdev_by_busid(struct ccw_driver *cdrv,					      const char *bus_id);/* devices drivers call these during module load and unload. * When a driver is registered, its probe method is called * when new devices for its type pop up */extern int  ccw_driver_register   (struct ccw_driver *driver);extern void ccw_driver_unregister (struct ccw_driver *driver);struct ccw1;extern int ccw_device_set_options(struct ccw_device *, unsigned long);/* Allow for i/o completion notification after primary interrupt status. */#define CCWDEV_EARLY_NOTIFICATION	0x0001/* Report all interrupt conditions. */#define CCWDEV_REPORT_ALL	 	0x0002/* Try to perform path grouping. */#define CCWDEV_DO_PATHGROUP             0x0004/* Allow forced onlining of boxed devices. */#define CCWDEV_ALLOW_FORCE              0x0008/* * ccw_device_start() * *  Start a S/390 channel program. When the interrupt arrives, the *  IRQ handler is called, either immediately, delayed (dev-end missing, *  or sense required) or never (no IRQ handler registered). *  Depending on the action taken, ccw_device_start() returns:   *                           0	     - Success *			     -EBUSY  - Device busy, or status pending *			     -ENODEV - Device not operational *                           -EINVAL - Device invalid for operation */extern int ccw_device_start(struct ccw_device *, struct ccw1 *,			    unsigned long, __u8, unsigned long);/* * ccw_device_start_timeout() * * This function notifies the device driver if the channel program has not * completed during the specified time. If a timeout occurs, the channel * program is terminated via xsch(), hsch() or csch(). */extern int ccw_device_start_timeout(struct ccw_device *, struct ccw1 *,				    unsigned long, __u8, unsigned long, int);extern int ccw_device_resume(struct ccw_device *);extern int ccw_device_halt(struct ccw_device *, unsigned long);extern int ccw_device_clear(struct ccw_device *, unsigned long);extern int read_dev_chars(struct ccw_device *cdev, void **buffer, int length);extern int read_conf_data(struct ccw_device *cdev, void **buffer, int *length);extern int ccw_device_set_online(struct ccw_device *cdev);extern int ccw_device_set_offline(struct ccw_device *cdev);extern struct ciw *ccw_device_get_ciw(struct ccw_device *, __u32 cmd);extern __u8 ccw_device_get_path_mask(struct ccw_device *);#define get_ccwdev_lock(x) (x)->ccwlock#define to_ccwdev(n) container_of(n, struct ccw_device, dev)#define to_ccwdrv(n) container_of(n, struct ccw_driver, driver)extern struct ccw_device *ccw_device_probe_console(void);// FIXME: these have to goextern int _ccw_device_get_device_number(struct ccw_device *);extern int _ccw_device_get_subchannel_number(struct ccw_device *);extern struct device *s390_root_dev_register(const char *);extern void s390_root_dev_unregister(struct device *);#endif /* _S390_CCWDEV_H_ */

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?