numaq.h

来自「Linux Kernel 2.6.9 for OMAP1710」· C头文件 代码 · 共 165 行

H
165
字号
/* * Written by: Patricia Gaughen, IBM Corporation * * Copyright (C) 2002, IBM Corp. * * All rights reserved.           * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or * NON INFRINGEMENT.  See the GNU General Public License for more * details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * * Send feedback to <gone@us.ibm.com> */#ifndef NUMAQ_H#define NUMAQ_H#ifdef CONFIG_X86_NUMAQextern int get_memcfg_numaq(void);/* * SYS_CFG_DATA_PRIV_ADDR, struct eachquadmem, and struct sys_cfg_data are the */#define SYS_CFG_DATA_PRIV_ADDR		0x0009d000 /* place for scd in private quad space *//* * Communication area for each processor on lynxer-processor tests. * * NOTE: If you change the size of this eachproc structure you need *       to change the definition for EACH_QUAD_SIZE. */struct eachquadmem {	unsigned int	priv_mem_start;		/* Starting address of this */						/* quad's private memory. */						/* This is always 0. */						/* In MB. */	unsigned int	priv_mem_size;		/* Size of this quad's */						/* private memory. */						/* In MB. */	unsigned int	low_shrd_mem_strp_start;/* Starting address of this */						/* quad's low shared block */						/* (untranslated). */						/* In MB. */	unsigned int	low_shrd_mem_start;	/* Starting address of this */						/* quad's low shared memory */						/* (untranslated). */						/* In MB. */	unsigned int	low_shrd_mem_size;	/* Size of this quad's low */						/* shared memory. */						/* In MB. */	unsigned int	lmmio_copb_start;	/* Starting address of this */						/* quad's local memory */						/* mapped I/O in the */						/* compatibility OPB. */						/* In MB. */	unsigned int	lmmio_copb_size;	/* Size of this quad's local */						/* memory mapped I/O in the */						/* compatibility OPB. */						/* In MB. */	unsigned int	lmmio_nopb_start;	/* Starting address of this */						/* quad's local memory */						/* mapped I/O in the */						/* non-compatibility OPB. */						/* In MB. */	unsigned int	lmmio_nopb_size;	/* Size of this quad's local */						/* memory mapped I/O in the */						/* non-compatibility OPB. */						/* In MB. */	unsigned int	io_apic_0_start;	/* Starting address of I/O */						/* APIC 0. */	unsigned int	io_apic_0_sz;		/* Size I/O APIC 0. */	unsigned int	io_apic_1_start;	/* Starting address of I/O */						/* APIC 1. */	unsigned int	io_apic_1_sz;		/* Size I/O APIC 1. */	unsigned int	hi_shrd_mem_start;	/* Starting address of this */						/* quad's high shared memory.*/						/* In MB. */	unsigned int	hi_shrd_mem_size;	/* Size of this quad's high */						/* shared memory. */						/* In MB. */	unsigned int	mps_table_addr;		/* Address of this quad's */						/* MPS tables from BIOS, */						/* in system space.*/	unsigned int	lcl_MDC_pio_addr;	/* Port-I/O address for */						/* local access of MDC. */	unsigned int	rmt_MDC_mmpio_addr;	/* MM-Port-I/O address for */						/* remote access of MDC. */	unsigned int	mm_port_io_start;	/* Starting address of this */						/* quad's memory mapped Port */						/* I/O space. */	unsigned int	mm_port_io_size;	/* Size of this quad's memory*/						/* mapped Port I/O space. */	unsigned int	mm_rmt_io_apic_start;	/* Starting address of this */						/* quad's memory mapped */						/* remote I/O APIC space. */	unsigned int	mm_rmt_io_apic_size;	/* Size of this quad's memory*/						/* mapped remote I/O APIC */						/* space. */	unsigned int	mm_isa_start;		/* Starting address of this */						/* quad's memory mapped ISA */						/* space (contains MDC */						/* memory space). */	unsigned int	mm_isa_size;		/* Size of this quad's memory*/						/* mapped ISA space (contains*/						/* MDC memory space). */	unsigned int	rmt_qmi_addr;		/* Remote addr to access QMI.*/	unsigned int	lcl_qmi_addr;		/* Local addr to access QMI. */};/* * Note: This structure must be NOT be changed unless the multiproc and * OS are changed to reflect the new structure. */struct sys_cfg_data {	unsigned int	quad_id;	unsigned int	bsp_proc_id; /* Boot Strap Processor in this quad. */	unsigned int	scd_version; /* Version number of this table. */	unsigned int	first_quad_id;	unsigned int	quads_present31_0; /* 1 bit for each quad */	unsigned int	quads_present63_32; /* 1 bit for each quad */	unsigned int	config_flags;	unsigned int	boot_flags;	unsigned int	csr_start_addr; /* Absolute value (not in MB) */	unsigned int	csr_size; /* Absolute value (not in MB) */	unsigned int	lcl_apic_start_addr; /* Absolute value (not in MB) */	unsigned int	lcl_apic_size; /* Absolute value (not in MB) */	unsigned int	low_shrd_mem_base; /* 0 or 512MB or 1GB */	unsigned int	low_shrd_mem_quad_offset; /* 0,128M,256M,512M,1G */					/* may not be totally populated */	unsigned int	split_mem_enbl; /* 0 for no low shared memory */ 	unsigned int	mmio_sz; /* Size of total system memory mapped I/O */				 /* (in MB). */	unsigned int	quad_spin_lock; /* Spare location used for quad */					/* bringup. */	unsigned int	nonzero55; /* For checksumming. */	unsigned int	nonzeroaa; /* For checksumming. */	unsigned int	scd_magic_number;	unsigned int	system_type;	unsigned int	checksum;	/*	 *	memory configuration area for each quad	 */        struct	eachquadmem eq[MAX_NUMNODES];	/* indexed by quad id */};static inline unsigned long *get_zholes_size(int nid){	return NULL;}#endif /* CONFIG_X86_NUMAQ */#endif /* NUMAQ_H */

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?