cache.h
来自「Linux Kernel 2.6.9 for OMAP1710」· C头文件 代码 · 共 142 行
H
142 行
#ifndef __ASM_SH64_CACHE_H#define __ASM_SH64_CACHE_H/* * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. * * include/asm-sh64/cache.h * * Copyright (C) 2000, 2001 Paolo Alberelli * Copyright (C) 2003, 2004 Paul Mundt * */#include <asm/cacheflush.h>#define L1_CACHE_SHIFT 5/* bytes per L1 cache line */#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)#define L1_CACHE_ALIGN_MASK (~(L1_CACHE_BYTES - 1))#define L1_CACHE_ALIGN(x) (((x)+(L1_CACHE_BYTES - 1)) & L1_CACHE_ALIGN_MASK)#define L1_CACHE_SIZE_BYTES (L1_CACHE_BYTES << 10)/* Largest L1 which this arch supports */#define L1_CACHE_SHIFT_MAX 5#ifdef MODULE#define __cacheline_aligned __attribute__((__aligned__(L1_CACHE_BYTES)))#else#define __cacheline_aligned \ __attribute__((__aligned__(L1_CACHE_BYTES), \ __section__(".data.cacheline_aligned")))#endif/* * Control Registers. */#define ICCR_BASE 0x01600000 /* Instruction Cache Control Register */#define ICCR_REG0 0 /* Register 0 offset */#define ICCR_REG1 1 /* Register 1 offset */#define ICCR0 ICCR_BASE+ICCR_REG0#define ICCR1 ICCR_BASE+ICCR_REG1#define ICCR0_OFF 0x0 /* Set ICACHE off */#define ICCR0_ON 0x1 /* Set ICACHE on */#define ICCR0_ICI 0x2 /* Invalidate all in IC */#define ICCR1_NOLOCK 0x0 /* Set No Locking */#define OCCR_BASE 0x01E00000 /* Operand Cache Control Register */#define OCCR_REG0 0 /* Register 0 offset */#define OCCR_REG1 1 /* Register 1 offset */#define OCCR0 OCCR_BASE+OCCR_REG0#define OCCR1 OCCR_BASE+OCCR_REG1#define OCCR0_OFF 0x0 /* Set OCACHE off */#define OCCR0_ON 0x1 /* Set OCACHE on */#define OCCR0_OCI 0x2 /* Invalidate all in OC */#define OCCR0_WT 0x4 /* Set OCACHE in WT Mode */#define OCCR0_WB 0x0 /* Set OCACHE in WB Mode */#define OCCR1_NOLOCK 0x0 /* Set No Locking *//* * SH-5 * A bit of description here, for neff=32. * * |<--- tag (19 bits) --->| * +-----------------------------+-----------------+------+----------+------+ * | | | ways |set index |offset| * +-----------------------------+-----------------+------+----------+------+ * ^ 2 bits 8 bits 5 bits * +- Bit 31 * * Cacheline size is based on offset: 5 bits = 32 bytes per line * A cache line is identified by a tag + set but OCACHETAG/ICACHETAG * have a broader space for registers. These are outlined by * CACHE_?C_*_STEP below. * *//* Valid and Dirty bits */#define SH_CACHE_VALID (1LL<<0)#define SH_CACHE_UPDATED (1LL<<57)/* Cache flags */#define SH_CACHE_MODE_WT (1LL<<0)#define SH_CACHE_MODE_WB (1LL<<1)#ifndef __ASSEMBLY__/* * Cache information structure. * * Defined for both I and D cache, per-processor. */struct cache_info { unsigned int ways; unsigned int sets; unsigned int linesz; unsigned int way_shift; unsigned int entry_shift; unsigned int set_shift; unsigned int way_step_shift; unsigned int asid_shift; unsigned int way_ofs; unsigned int asid_mask; unsigned int idx_mask; unsigned int epn_mask; unsigned long flags;};#endif /* __ASSEMBLY__ *//* Instruction cache */#define CACHE_IC_ADDRESS_ARRAY 0x01000000/* Operand Cache */#define CACHE_OC_ADDRESS_ARRAY 0x01800000/* These declarations relate to cache 'synonyms' in the operand cache. A 'synonym' occurs where effective address bits overlap between those used for indexing the cache sets and those passed to the MMU for translation. In the case of SH5-101 & SH5-103, only bit 12 is affected for 4k pages. */#define CACHE_OC_N_SYNBITS 1 /* Number of synonym bits */#define CACHE_OC_SYN_SHIFT 12/* Mask to select synonym bit(s) */#define CACHE_OC_SYN_MASK (((1UL<<CACHE_OC_N_SYNBITS)-1)<<CACHE_OC_SYN_SHIFT)/* * Instruction cache can't be invalidated based on physical addresses. * No Instruction Cache defines required, then. */#endif /* __ASM_SH64_CACHE_H */
⌨️ 快捷键说明
复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?