system.h

来自「Linux Kernel 2.6.9 for OMAP1710」· C头文件 代码 · 共 205 行

H
205
字号
#ifndef __ASM_ARM_SYSTEM_H#define __ASM_ARM_SYSTEM_H#ifdef __KERNEL__#include <linux/config.h>#include <linux/kernel.h>#include <asm/proc-fns.h>#define vectors_base()  (0)static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size){        extern void __bad_xchg(volatile void *, int);        switch (size) {                case 1: return cpu_xchg_1(x, ptr);                case 4: return cpu_xchg_4(x, ptr);                default: __bad_xchg(ptr, size);        }        return 0;}/* * We need to turn the caches off before calling the reset vector - RiscOS * messes up if we don't */#define proc_hard_reset()       cpu_proc_fin()/* * A couple of speedups for the ARM *//* * Enable IRQs  (sti) */#define local_irq_enable()                                      \        do {                                    \          unsigned long temp;                   \          __asm__ __volatile__(                 \"       mov     %0, pc          @ sti\n"        \"       bic     %0, %0, #0x08000000\n"          \"       teqp    %0, #0\n"                       \          : "=r" (temp)                         \          :                                     \          : "memory");                          \        } while(0)/* * Disable IRQs (cli) */#define local_irq_disable()                                     \        do {                                    \          unsigned long temp;                   \          __asm__ __volatile__(                 \"       mov     %0, pc          @ cli\n"        \"       orr     %0, %0, #0x08000000\n"          \"       teqp    %0, #0\n"                       \          : "=r" (temp)                         \          :                                     \          : "memory");                          \        } while(0)/* Disable FIQs  (clf) */#define __clf() do {                            \        unsigned long temp;                     \        __asm__ __volatile__(                   \"       mov     %0, pc          @ clf\n"        \"       orr     %0, %0, #0x04000000\n"          \"       teqp    %0, #0\n"                       \        : "=r" (temp));                         \    } while(0)/* Enable FIQs (stf) */#define __stf() do {                            \        unsigned long temp;                     \        __asm__ __volatile__(                   \"       mov     %0, pc          @ stf\n"        \"       bic     %0, %0, #0x04000000\n"          \"       teqp    %0, #0\n"                       \        : "=r" (temp));                         \    } while(0)/* * save current IRQ & FIQ state */#define local_save_flags(x)                             \        do {                                    \          __asm__ __volatile__(                 \"       mov     %0, pc          @ save_flags\n" \"       and     %0, %0, #0x0c000000\n"          \          : "=r" (x));                          \        } while (0)/* * Save the current interrupt enable state & disable IRQs */#define local_irq_save(x)                               \        do {                                            \          unsigned long temp;                           \          __asm__ __volatile__(                         \"       mov     %0, pc          @ save_flags_cli\n"     \"       orr     %1, %0, #0x08000000\n"                  \"       and     %0, %0, #0x0c000000\n"                  \"       teqp    %1, #0\n"                               \          : "=r" (x), "=r" (temp)                       \          :                                             \          : "memory");                                  \        } while (0)/* * restore saved IRQ & FIQ state */#define local_irq_restore(x)                            \        do {                                            \          unsigned long temp;                           \          __asm__ __volatile__(                         \"       mov     %0, pc          @ restore_flags\n"      \"       bic     %0, %0, #0x0c000000\n"                  \"       orr     %0, %0, %1\n"                           \"       teqp    %0, #0\n"                               \          : "=&r" (temp)                                \          : "r" (x)                                     \          : "memory");                                  \        } while (0)struct thread_info;/* information about the system we're running on */extern unsigned int system_rev;extern unsigned int system_serial_low;extern unsigned int system_serial_high;struct pt_regs;void die(const char *msg, struct pt_regs *regs, int err)		__attribute__((noreturn));void die_if_kernel(const char *str, struct pt_regs *regs, int err);void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int,				       struct pt_regs *),		     int sig, const char *name);#define xchg(ptr,x) \	((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))#define tas(ptr) (xchg((ptr),1))extern asmlinkage void __backtrace(void);/* * Include processor dependent parts */#define mb() __asm__ __volatile__ ("" : : : "memory")#define rmb() mb()#define wmb() mb()#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");#define prepare_to_switch()    do { } while(0)/* * switch_to(prev, next) should switch from task `prev' to `next' * `prev' will never be the same as `next'. * The `mb' is to tell GCC not to cache `current' across this call. */struct thread_info;extern struct task_struct *__switch_to(struct thread_info *, struct thread_info *);#define switch_to(prev,next,last)                                       \        do {                                                            \                __switch_to(prev->thread_info,next->thread_info);       \                mb();                                                   \        } while (0)#ifdef CONFIG_SMP#error SMP not supported#endif /* CONFIG_SMP */#define irqs_disabled()                 \({                                      \        unsigned long flags;            \        local_save_flags(flags);        \        flags & PSR_I_BIT;              \})#define set_mb(var, value)  do { var = value; mb(); } while (0)#define smp_mb()		barrier()#define smp_rmb()		barrier()#define smp_wmb()		barrier()#define smp_read_barrier_depends()              do { } while(0)#define clf()			__clf()#define stf()			__stf()#endif /* __KERNEL__ */#endif

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?