pgtable.h
来自「Linux Kernel 2.6.9 for OMAP1710」· C头文件 代码 · 共 296 行
H
296 行
/* * linux/include/asm-arm26/pgtable.h * * Copyright (C) 2000-2002 Russell King * Copyright (C) 2003 Ian Molton * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */#ifndef _ASMARM_PGTABLE_H#define _ASMARM_PGTABLE_H#include <linux/config.h>#include <asm/memory.h>/* * The table below defines the page protection levels that we insert into our * Linux page table version. These get translated into the best that the * architecture can perform. Note that on most ARM hardware: * 1) We cannot do execute protection * 2) If we could do execute protection, then read is implied * 3) write implies read permissions */#define __P000 PAGE_NONE#define __P001 PAGE_READONLY#define __P010 PAGE_COPY#define __P011 PAGE_COPY#define __P100 PAGE_READONLY#define __P101 PAGE_READONLY#define __P110 PAGE_COPY#define __P111 PAGE_COPY#define __S000 PAGE_NONE#define __S001 PAGE_READONLY#define __S010 PAGE_SHARED#define __S011 PAGE_SHARED#define __S100 PAGE_READONLY#define __S101 PAGE_READONLY#define __S110 PAGE_SHARED#define __S111 PAGE_SHARED/* * PMD_SHIFT determines the size of the area a second-level page table can map * PGDIR_SHIFT determines what a third-level page table entry can map */#define PGD_SHIFT 25#define PMD_SHIFT 20#define PGD_SIZE (1UL << PGD_SHIFT)#define PGD_MASK (~(PGD_SIZE-1))#define PMD_SIZE (1UL << PMD_SHIFT)#define PMD_MASK (~(PMD_SIZE-1))/* The kernel likes to use these names for the above (ick) */#define PGDIR_SIZE PGD_SIZE#define PGDIR_MASK PGD_MASK#define PTRS_PER_PGD 32#define PTRS_PER_PMD 1#define PTRS_PER_PTE 32#define FIRST_USER_PGD_NR 1#define USER_PTRS_PER_PGD ((TASK_SIZE/PGD_SIZE) - FIRST_USER_PGD_NR)// FIXME - WTF?#define LIBRARY_TEXT_START 0x0c000000#ifndef __ASSEMBLY__extern void __pte_error(const char *file, int line, unsigned long val);extern void __pmd_error(const char *file, int line, unsigned long val);extern void __pgd_error(const char *file, int line, unsigned long val);#define pte_ERROR(pte) __pte_error(__FILE__, __LINE__, pte_val(pte))#define pmd_ERROR(pmd) __pmd_error(__FILE__, __LINE__, pmd_val(pmd))#define pgd_ERROR(pgd) __pgd_error(__FILE__, __LINE__, pgd_val(pgd))/* * ZERO_PAGE is a global shared page that is always zero: used * for zero-mapped memory areas etc.. */extern struct page *empty_zero_page;#define ZERO_PAGE(vaddr) (empty_zero_page)#define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT)#define pte_page(pte) (pfn_to_page(pte_pfn(pte)))#define pfn_pte(pfn,prot) (__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)))#define pages_to_mb(x) ((x) >> (20 - PAGE_SHIFT))#define mk_pte(page,prot) pfn_pte(page_to_pfn(page),prot)#define page_pte_prot(page,prot) mk_pte(page, prot)#define page_pte(page) mk_pte(page, __pgprot(0))/* * Terminology: PGD = Page Directory, PMD = Page Middle Directory, * PTE = Page Table Entry * * on arm26 we have no 2nd level page table. we simulate this by removing the * PMD. * * pgd_none is 0 to prevernt pmd_alloc() calling __pmd_alloc(). This causes it * to return pmd_offset(pgd,addr) which is a pointer to the pgd (IOW, a no-op). * * however, to work this way, whilst we are allocating 32 pgds, containing 32 * PTEs, the actual work is done on the PMDs, thus: * * instead of mm->pgd->pmd->pte * we have mm->pgdpmd->pte * * IOW, think of PGD operations and PMD ones as being the same thing, just * that PGD stuff deals with the mm_struct side of things, wheras PMD stuff * deals with the pte side of things. * * additionally, we store some bits in the PGD and PTE pointers: * PGDs: * o The lowest (1) bit of the PGD is to determine if it is present or swap. * o The 2nd bit of the PGD is unused and must be zero. * o The top 6 bits of the PGD must be zero. * PTEs: * o The lower 5 bits of a pte are flags. bit 1 is the 'present' flag. The * others determine the pages attributes. * * the pgd_val, pmd_val, and pte_val macros seem to be private to our code. * They get the RAW value of the PGD/PMD/PTE entry, including our flags * encoded into the pointers. * * The pgd_offset, pmd_offset, and pte_offset macros are used by the kernel, * so they shouldnt have our flags attached. * * If you understood that, feel free to explain it to me... * */#define _PMD_PRESENT (0x01)/* These definitions allow us to optimise out stuff like pmd_alloc() */#define pgd_none(pgd) (0) #define pgd_bad(pgd) (0)#define pgd_present(pgd) (1)#define pgd_clear(pgdp) do { } while (0)/* Whilst these handle our actual 'page directory' (the agglomeration of pgd and pmd) */#define pmd_none(pmd) (!pmd_val(pmd))#define pmd_bad(pmd) ((pmd_val(pmd) & 0xfc000002))#define pmd_present(pmd) (pmd_val(pmd) & _PMD_PRESENT)#define set_pmd(pmd_ptr, pmd) ((*(pmd_ptr)) = (pmd))#define pmd_clear(pmdp) set_pmd(pmdp, __pmd(0))/* and these handle our pte tables */#define pte_none(pte) (!pte_val(pte))#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT)#define set_pte(pte_ptr, pte) ((*(pte_ptr)) = (pte))#define pte_clear(ptep) set_pte((ptep), __pte(0))/* macros to ease the getting of pointers to stuff... */#define pgd_offset(mm, addr) ((pgd_t *)(mm)->pgd + __pgd_index(addr))#define pmd_offset(pgd, addr) ((pmd_t *)(pgd))#define pte_offset(pmd, addr) ((pte_t *)pmd_page(*(pmd)) + __pte_index(addr))/* there is no __pmd_index as we dont use pmds */#define __pgd_index(addr) ((addr) >> PGD_SHIFT)#define __pte_index(addr) (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))/* Keep the kernel happy */#define pgd_index(addr) __pgd_index(addr)#define pgd_offset_k(addr) (pgd_offset(&init_mm, addr))/* * The vmalloc() routines leaves a hole of 4kB between each vmalloced * area for the same reason. ;) FIXME: surely 1 page not 4k ? */#define VMALLOC_START 0x01a00000#define VMALLOC_END 0x01c00000/* Is pmd_page supposed to return a pointer to a page in some arches? ours seems to * return a pointer to memory (no special alignment) */#define pmd_page(pmd) ((struct page *)(pmd_val((pmd)) & ~_PMD_PRESENT))#define pmd_page_kernel(pmd) ((pte_t *)(pmd_val((pmd)) & ~_PMD_PRESENT))#define pte_offset_kernel(dir,addr) (pmd_page_kernel(*(dir)) + __pte_index(addr))#define pte_offset_map(dir,addr) (pmd_page_kernel(*(dir)) + __pte_index(addr))#define pte_offset_map_nested(dir,addr) (pmd_page_kernel(*(dir)) + __pte_index(addr))#define pte_unmap(pte) do { } while (0)#define pte_unmap_nested(pte) do { } while (0)#define _PAGE_PRESENT 0x01#define _PAGE_READONLY 0x02#define _PAGE_NOT_USER 0x04#define _PAGE_OLD 0x08#define _PAGE_CLEAN 0x10// an old page has never been read.// a clean page has never been written./* -- present -- -- !dirty -- --- !write --- ---- !user --- */#define PAGE_NONE __pgprot(_PAGE_PRESENT | _PAGE_CLEAN | _PAGE_READONLY | _PAGE_NOT_USER)#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_CLEAN )#define PAGE_COPY __pgprot(_PAGE_PRESENT | _PAGE_CLEAN | _PAGE_READONLY )#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_CLEAN | _PAGE_READONLY )#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_NOT_USER)#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_OLD | _PAGE_CLEAN)/* * The following only work if pte_present() is true. * Undefined behaviour if not.. */#define pte_read(pte) (!(pte_val(pte) & _PAGE_NOT_USER))#define pte_write(pte) (!(pte_val(pte) & _PAGE_READONLY))#define pte_exec(pte) (!(pte_val(pte) & _PAGE_NOT_USER))#define pte_dirty(pte) (!(pte_val(pte) & _PAGE_CLEAN))#define pte_young(pte) (!(pte_val(pte) & _PAGE_OLD))//ONLY when !pte_present() I think. nicked from arm32 (FIXME!)#define pte_file(pte) (!(pte_val(pte) & _PAGE_OLD))#define PTE_BIT_FUNC(fn,op) \static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }PTE_BIT_FUNC(wrprotect, |= _PAGE_READONLY);PTE_BIT_FUNC(mkwrite, &= ~_PAGE_READONLY);PTE_BIT_FUNC(exprotect, |= _PAGE_NOT_USER);PTE_BIT_FUNC(mkexec, &= ~_PAGE_NOT_USER);PTE_BIT_FUNC(mkclean, |= _PAGE_CLEAN);PTE_BIT_FUNC(mkdirty, &= ~_PAGE_CLEAN);PTE_BIT_FUNC(mkold, |= _PAGE_OLD);PTE_BIT_FUNC(mkyoung, &= ~_PAGE_OLD);/* * We don't store cache state bits in the page table here. FIXME - or do we? */#define pgprot_noncached(prot) (prot)#define pgprot_writecombine(prot) (prot) //FIXME - is a no-op?extern void pgtable_cache_init(void);//FIXME - nicked from arm32 and brutally hacked. probably wrong.#define pte_to_pgoff(x) (pte_val(x) >> 2)#define pgoff_to_pte(x) __pte(((x) << 2) & ~_PAGE_OLD)//FIXME - next line borrowed from arm32. is it right?#define PTE_FILE_MAX_BITS 30static inline pte_t pte_modify(pte_t pte, pgprot_t newprot){ pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot); return pte;}extern pgd_t swapper_pg_dir[PTRS_PER_PGD];/* Encode and decode a swap entry. * * We support up to 32GB of swap on 4k machines */#define __swp_type(x) (((x).val >> 2) & 0x7f)#define __swp_offset(x) ((x).val >> 9)#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 9) })#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })#define __swp_entry_to_pte(swp) ((pte_t) { (swp).val })/* Needs to be defined here and not in linux/mm.h, as it is arch dependent *//* FIXME: this is not correct */#define kern_addr_valid(addr) (1)/* * Conversion functions: convert a page and protection to a page entry, * and a page entry and page directory to the page they refer to. */static inline pte_t mk_pte_phys(unsigned long physpage, pgprot_t pgprot){ pte_t pte; pte_val(pte) = physpage | pgprot_val(pgprot); return pte;}#include <asm-generic/pgtable.h>/* * remap a physical address `phys' of size `size' with page protection `prot' * into virtual address `from' */#define io_remap_page_range(vma,from,phys,size,prot) \ remap_page_range(vma,from,phys,size,prot)#endif /* !__ASSEMBLY__ */#endif /* _ASMARM_PGTABLE_H */
⌨️ 快捷键说明
复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?