gianfar.h

来自「Linux Kernel 2.6.9 for OMAP1710」· C头文件 代码 · 共 536 行 · 第 1/2 页

/* 
 * drivers/net/gianfar.h
 *
 * Gianfar Ethernet Driver
 * Driver for FEC on MPC8540 and TSEC on MPC8540/MPC8560
 * Based on 8260_io/fcc_enet.c
 *
 * Author: Andy Fleming
 * Maintainer: Kumar Gala ([e-mail])
 *
 * Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 *
 *  Still left to do:
 *      -Add support for module parameters
 *	-Add support for ethtool -s
 *	-Add patch for ethtool phys id
 */
#ifndef __GIANFAR_H
#define __GIANFAR_H

#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/spinlock.h>
#include <linux/mm.h>

#include <asm/io.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
#include <linux/module.h>
#include <linux/version.h>
#include <linux/crc32.h>
#include <linux/workqueue.h>
#include <linux/ethtool.h>
#include <linux/netdevice.h>
#include <asm/ocp.h>
#include "gianfar_phy.h"

/* The maximum number of packets to be handled in one call of gfar_poll */
#define GFAR_DEV_WEIGHT 64

/* Number of bytes to align the rx bufs to */
#define RXBUF_ALIGNMENT 64

/* The number of bytes which composes a unit for the purpose of
 * allocating data buffers.  ie-for any given MTU, the data buffer
 * will be the next highest multiple of 512 bytes. */
#define INCREMENTAL_BUFFER_SIZE 512


#define MAC_ADDR_LEN 6

#define PHY_INIT_TIMEOUT 100000
#define GFAR_PHY_CHANGE_TIME 2

#define DEVICE_NAME "%s: Gianfar Ethernet Controller Version 1.1, "
#define DRV_NAME "gfar-enet"
extern const char gfar_driver_name[];
extern const char gfar_driver_version[];

/* These need to be powers of 2 for this driver */
#ifdef CONFIG_GFAR_NAPI
#define DEFAULT_TX_RING_SIZE	256
#define DEFAULT_RX_RING_SIZE	256
#else
#define DEFAULT_TX_RING_SIZE    64
#define DEFAULT_RX_RING_SIZE    64
#endif

#define GFAR_RX_MAX_RING_SIZE   256
#define GFAR_TX_MAX_RING_SIZE   256

#define DEFAULT_RX_BUFFER_SIZE  1536
#define TX_RING_MOD_MASK(size) (size-1)
#define RX_RING_MOD_MASK(size) (size-1)
#define JUMBO_BUFFER_SIZE 9728
#define JUMBO_FRAME_SIZE 9600

/* Latency of interface clock in nanoseconds */
/* Interface clock latency , in this case, means the 
 * time described by a value of 1 in the interrupt
 * coalescing registers' time fields.  Since those fields
 * refer to the time it takes for 64 clocks to pass, the
 * latencies are as such:
 * GBIT = 125MHz => 8ns/clock => 8*64 ns / tick
 * 100 = 25 MHz => 40ns/clock => 40*64 ns / tick
 * 10 = 2.5 MHz => 400ns/clock => 400*64 ns / tick
 */
#define GFAR_GBIT_TIME  512
#define GFAR_100_TIME   2560
#define GFAR_10_TIME    25600

#define DEFAULT_TX_COALESCE 1
#define DEFAULT_TXCOUNT	16
#define DEFAULT_TXTIME	400

#define DEFAULT_RX_COALESCE 1
#define DEFAULT_RXCOUNT	16
#define DEFAULT_RXTIME	400

#define TBIPA_VALUE		0x1f
#define MIIMCFG_INIT_VALUE	0x00000007
#define MIIMCFG_RESET           0x80000000
#define MIIMIND_BUSY            0x00000001

/* MAC register bits */
#define MACCFG1_SOFT_RESET	0x80000000
#define MACCFG1_RESET_RX_MC	0x00080000
#define MACCFG1_RESET_TX_MC	0x00040000
#define MACCFG1_RESET_RX_FUN	0x00020000
#define	MACCFG1_RESET_TX_FUN	0x00010000
#define MACCFG1_LOOPBACK	0x00000100
#define MACCFG1_RX_FLOW		0x00000020
#define MACCFG1_TX_FLOW		0x00000010
#define MACCFG1_SYNCD_RX_EN	0x00000008
#define MACCFG1_RX_EN		0x00000004
#define MACCFG1_SYNCD_TX_EN	0x00000002
#define MACCFG1_TX_EN		0x00000001

#define MACCFG2_INIT_SETTINGS	0x00007205
#define MACCFG2_FULL_DUPLEX	0x00000001
#define MACCFG2_IF              0x00000300
#define MACCFG2_MII             0x00000100
#define MACCFG2_GMII            0x00000200
#define MACCFG2_HUGEFRAME	0x00000020
#define MACCFG2_LENGTHCHECK	0x00000010

#define ECNTRL_INIT_SETTINGS	0x00001000
#define ECNTRL_TBI_MODE         0x00000020

#define MRBLR_INIT_SETTINGS	DEFAULT_RX_BUFFER_SIZE

#define MINFLR_INIT_SETTINGS	0x00000040

/* Init to do tx snooping for buffers and descriptors */
#define DMACTRL_INIT_SETTINGS   0x000000c3
#define DMACTRL_GRS             0x00000010
#define DMACTRL_GTS             0x00000008

#define TSTAT_CLEAR_THALT       0x80000000

/* Interrupt coalescing macros */
#define IC_ICEN			0x80000000
#define IC_ICFT_MASK		0x1fe00000
#define IC_ICFT_SHIFT		21
#define mk_ic_icft(x)		\
	(((unsigned int)x << IC_ICFT_SHIFT)&IC_ICFT_MASK)
#define IC_ICTT_MASK		0x0000ffff
#define mk_ic_ictt(x)		(x&IC_ICTT_MASK)

#define mk_ic_value(count, time) (IC_ICEN | \
				mk_ic_icft(count) | \
				mk_ic_ictt(time))

#define RCTRL_PROM		0x00000008
#define RSTAT_CLEAR_RHALT       0x00800000

#define IEVENT_INIT_CLEAR	0xffffffff
#define IEVENT_BABR		0x80000000
#define IEVENT_RXC		0x40000000
#define IEVENT_BSY		0x20000000
#define IEVENT_EBERR		0x10000000
#define IEVENT_MSRO		0x04000000
#define IEVENT_GTSC		0x02000000
#define IEVENT_BABT		0x01000000
#define IEVENT_TXC		0x00800000
#define IEVENT_TXE		0x00400000
#define IEVENT_TXB		0x00200000
#define IEVENT_TXF		0x00100000
#define IEVENT_LC		0x00040000
#define IEVENT_CRL		0x00020000
#define IEVENT_XFUN		0x00010000
#define IEVENT_RXB0		0x00008000
#define IEVENT_GRSC		0x00000100
#define IEVENT_RXF0		0x00000080
#define IEVENT_RX_MASK          (IEVENT_RXB0 | IEVENT_RXF0)
#define IEVENT_TX_MASK          (IEVENT_TXB | IEVENT_TXF)
#define IEVENT_ERR_MASK         \
(IEVENT_RXC | IEVENT_BSY | IEVENT_EBERR | IEVENT_MSRO | \
 IEVENT_BABT | IEVENT_TXC | IEVENT_TXE | IEVENT_LC \
 | IEVENT_CRL | IEVENT_XFUN)

#define IMASK_INIT_CLEAR	0x00000000
#define IMASK_BABR              0x80000000
#define IMASK_RXC               0x40000000
#define IMASK_BSY               0x20000000
#define IMASK_EBERR             0x10000000
#define IMASK_MSRO		0x04000000
#define IMASK_GRSC              0x02000000
#define IMASK_BABT		0x01000000
#define IMASK_TXC               0x00800000
#define IMASK_TXEEN		0x00400000
#define IMASK_TXBEN		0x00200000
#define IMASK_TXFEN             0x00100000
#define IMASK_LC		0x00040000
#define IMASK_CRL		0x00020000
#define IMASK_XFUN		0x00010000
#define IMASK_RXB0              0x00008000
#define IMASK_GTSC              0x00000100
#define IMASK_RXFEN0		0x00000080
#define IMASK_RX_DISABLED ~(IMASK_RXFEN0 | IMASK_BSY)
#define IMASK_DEFAULT  (IMASK_TXEEN | IMASK_TXFEN | IMASK_TXBEN | \
		IMASK_RXFEN0 | IMASK_BSY | IMASK_EBERR | IMASK_BABR | \
		IMASK_XFUN | IMASK_RXC | IMASK_BABT)


/* Attribute fields */

/* This enables rx snooping for buffers and descriptors */
#ifdef CONFIG_GFAR_BDSTASH
#define ATTR_BDSTASH		0x00000800
#else
#define ATTR_BDSTASH		0x00000000
#endif

#ifdef CONFIG_GFAR_BUFSTASH
#define ATTR_BUFSTASH		0x00004000
#define STASH_LENGTH		64
#else
#define ATTR_BUFSTASH		0x00000000
#endif

#define ATTR_SNOOPING		0x000000c0
#define ATTR_INIT_SETTINGS      (ATTR_SNOOPING \
		| ATTR_BDSTASH | ATTR_BUFSTASH)

#define ATTRELI_INIT_SETTINGS   0x0


/* TxBD status field bits */
#define TXBD_READY		0x8000
#define TXBD_PADCRC		0x4000
#define TXBD_WRAP		0x2000
#define TXBD_INTERRUPT		0x1000
#define TXBD_LAST		0x0800
#define TXBD_CRC		0x0400
#define TXBD_DEF		0x0200
#define TXBD_HUGEFRAME		0x0080
#define TXBD_LATECOLLISION	0x0080
#define TXBD_RETRYLIMIT		0x0040
#define	TXBD_RETRYCOUNTMASK	0x003c
#define TXBD_UNDERRUN		0x0002

/* RxBD status field bits */
#define RXBD_EMPTY		0x8000
#define RXBD_RO1		0x4000
#define RXBD_WRAP		0x2000
#define RXBD_INTERRUPT		0x1000
#define RXBD_LAST		0x0800
#define RXBD_FIRST		0x0400
#define RXBD_MISS		0x0100
#define RXBD_BROADCAST		0x0080
#define RXBD_MULTICAST		0x0040
#define RXBD_LARGE		0x0020