dl2k.c

Linux Kernel 2.6.9 for OMAP1710

/*  D-Link DL2000-based Gigabit Ethernet Adapter Linux driver */
/*
    Copyright (c) 2001, 2002 by D-Link Corporation
    Written by Edward Peng.<[e-mail]>
    Created 03-May-2001, base on Linux' sundance.c.

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.
*/
/*
    Rev		Date		Description
    ==========================================================================
    0.01	2001/05/03	Created DL2000-based linux driver
    0.02	2001/05/21	Added VLAN and hardware checksum support.
    1.00	2001/06/26	Added jumbo frame support.
    1.01	2001/08/21	Added two parameters, rx_coalesce and rx_timeout.
    1.02	2001/10/08	Supported fiber media.
    				Added flow control parameters.
    1.03	2001/10/12	Changed the default media to 1000mbps_fd for 
    				the fiber devices.
    1.04	2001/11/08	Fixed Tx stopped when tx very busy.
    1.05	2001/11/22	Fixed Tx stopped when unidirectional tx busy.
    1.06	2001/12/13	Fixed disconnect bug at 10Mbps mode.
    				Fixed tx_full flag incorrect.
				Added tx_coalesce paramter.
    1.07	2002/01/03	Fixed miscount of RX frame error.
    1.08	2002/01/17	Fixed the multicast bug.
    1.09	2002/03/07	Move rx-poll-now to re-fill loop.	
    				Added rio_timer() to watch rx buffers. 
    1.10	2002/04/16	Fixed miscount of carrier error.
    1.11	2002/05/23	Added ISR schedule scheme
    				Fixed miscount of rx frame error for DGE-550SX.
    				Fixed VLAN bug.
    1.12	2002/06/13	Lock tx_coalesce=1 on 10/100Mbps mode.
    1.13	2002/08/13	1. Fix disconnection (many tx:carrier/rx:frame
    				   errs) with some mainboards.
    				2. Use definition "DRV_NAME" "DRV_VERSION" 
				   "DRV_RELDATE" for flexibility.	
    1.14	2002/08/14	Support ethtool.	
    1.15	2002/08/27	Changed the default media to Auto-Negotiation
				for the fiber devices.    
    1.16	2002/09/04      More power down time for fiber devices auto-
    				negotiation.
				Fix disconnect bug after ifup and ifdown.
    1.17	2002/10/03	Fix RMON statistics overflow. 
			     	Always use I/O mapping to access eeprom, 
				avoid system freezing with some chipsets.

*/
#define DRV_NAME	"D-Link DL2000-based linux driver"
#define DRV_VERSION	"v1.17a"
#define DRV_RELDATE	"2002/10/04"
#include "dl2k.h"

static char version[] __devinitdata =
      KERN_INFO DRV_NAME " " DRV_VERSION " " DRV_RELDATE "\n";	
#define MAX_UNITS 8
static int mtu[MAX_UNITS];
static int vlan[MAX_UNITS];
static int jumbo[MAX_UNITS];
static char *media[MAX_UNITS];
static int tx_flow=-1;
static int rx_flow=-1;
static int copy_thresh;
static int rx_coalesce=10;	/* Rx frame count each interrupt */
static int rx_timeout=200;	/* Rx DMA wait time in 640ns increments */
static int tx_coalesce=16;	/* HW xmit count each TxDMAComplete */


MODULE_AUTHOR ("Edward Peng");
MODULE_DESCRIPTION ("D-Link DL2000-based Gigabit Ethernet Adapter");
MODULE_LICENSE("GPL");
MODULE_PARM (mtu, "1-" __MODULE_STRING (MAX_UNITS) "i");
MODULE_PARM (media, "1-" __MODULE_STRING (MAX_UNITS) "s");
MODULE_PARM (vlan, "1-" __MODULE_STRING (MAX_UNITS) "i");
MODULE_PARM (jumbo, "1-" __MODULE_STRING (MAX_UNITS) "i");
MODULE_PARM (tx_flow, "i");
MODULE_PARM (rx_flow, "i");
MODULE_PARM (copy_thresh, "i");
MODULE_PARM (rx_coalesce, "i");	/* Rx frame count each interrupt */
MODULE_PARM (rx_timeout, "i");	/* Rx DMA wait time in 64ns increments */
MODULE_PARM (tx_coalesce, "i"); /* HW xmit count each TxDMAComplete */


/* Enable the default interrupts */
#define DEFAULT_INTR (RxDMAComplete | HostError | IntRequested | TxDMAComplete| \
       UpdateStats | LinkEvent)
#define EnableInt() \
writew(DEFAULT_INTR, ioaddr + IntEnable)

static int max_intrloop = 50;
static int multicast_filter_limit = 0x40;

static int rio_open (struct net_device *dev);
static void rio_timer (unsigned long data);
static void rio_tx_timeout (struct net_device *dev);
static void alloc_list (struct net_device *dev);
static int start_xmit (struct sk_buff *skb, struct net_device *dev);
static irqreturn_t rio_interrupt (int irq, void *dev_instance, struct pt_regs *regs);
static void rio_free_tx (struct net_device *dev, int irq);
static void tx_error (struct net_device *dev, int tx_status);
static int receive_packet (struct net_device *dev);
static void rio_error (struct net_device *dev, int int_status);
static int change_mtu (struct net_device *dev, int new_mtu);
static void set_multicast (struct net_device *dev);
static struct net_device_stats *get_stats (struct net_device *dev);
static int clear_stats (struct net_device *dev);
static int rio_ethtool_ioctl (struct net_device *dev, void __user *useraddr);
static int rio_ioctl (struct net_device *dev, struct ifreq *rq, int cmd);
static int rio_close (struct net_device *dev);
static int find_miiphy (struct net_device *dev);
static int parse_eeprom (struct net_device *dev);
static int read_eeprom (long ioaddr, int eep_addr);
static int mii_wait_link (struct net_device *dev, int wait);
static int mii_set_media (struct net_device *dev);
static int mii_get_media (struct net_device *dev);
static int mii_set_media_pcs (struct net_device *dev);
static int mii_get_media_pcs (struct net_device *dev);
static int mii_read (struct net_device *dev, int phy_addr, int reg_num);
static int mii_write (struct net_device *dev, int phy_addr, int reg_num,
		      u16 data);

static int __devinit
rio_probe1 (struct pci_dev *pdev, const struct pci_device_id *ent)
{
	struct net_device *dev;
	struct netdev_private *np;
	static int card_idx;
	int chip_idx = ent->driver_data;
	int err, irq;
	long ioaddr;
	static int version_printed;
	void *ring_space;
	dma_addr_t ring_dma;

	if (!version_printed++)
		printk ("%s", version);

	err = pci_enable_device (pdev);
	if (err)
		return err;

	irq = pdev->irq;
	err = pci_request_regions (pdev, "dl2k");
	if (err)
		goto err_out_disable;

	pci_set_master (pdev);
	dev = alloc_etherdev (sizeof (*np));
	if (!dev) {
		err = -ENOMEM;
		goto err_out_res;
	}
	SET_MODULE_OWNER (dev);
	SET_NETDEV_DEV(dev, &pdev->dev);

#ifdef MEM_MAPPING
	ioaddr = pci_resource_start (pdev, 1);
	ioaddr = (long) ioremap (ioaddr, RIO_IO_SIZE);
	if (!ioaddr) {
		err = -ENOMEM;
		goto err_out_dev;
	}
#else
	ioaddr = pci_resource_start (pdev, 0);
#endif
	dev->base_addr = ioaddr;
	dev->irq = irq;
	np = dev->priv;
	np->chip_id = chip_idx;
	np->pdev = pdev;
	spin_lock_init (&np->tx_lock);
	spin_lock_init (&np->rx_lock);

	/* Parse manual configuration */
	np->an_enable = 1;
	np->tx_coalesce = 1;
	if (card_idx < MAX_UNITS) {
		if (media[card_idx] != NULL) {
			np->an_enable = 0;
			if (strcmp (media[card_idx], "auto") == 0 ||
			    strcmp (media[card_idx], "autosense") == 0 || 
			    strcmp (media[card_idx], "0") == 0 ) {
				np->an_enable = 2; 
			} else if (strcmp (media[card_idx], "100mbps_fd") == 0 ||
			    strcmp (media[card_idx], "4") == 0) {
				np->speed = 100;
				np->full_duplex = 1;
			} else if (strcmp (media[card_idx], "100mbps_hd") == 0
				   || strcmp (media[card_idx], "3") == 0) {
				np->speed = 100;
				np->full_duplex = 0;
			} else if (strcmp (media[card_idx], "10mbps_fd") == 0 ||
				   strcmp (media[card_idx], "2") == 0) {
				np->speed = 10;
				np->full_duplex = 1;
			} else if (strcmp (media[card_idx], "10mbps_hd") == 0 ||
				   strcmp (media[card_idx], "1") == 0) {
				np->speed = 10;
				np->full_duplex = 0;
			} else if (strcmp (media[card_idx], "1000mbps_fd") == 0 ||
				 strcmp (media[card_idx], "6") == 0) {
				np->speed=1000;
				np->full_duplex=1;
			} else if (strcmp (media[card_idx], "1000mbps_hd") == 0 ||
				 strcmp (media[card_idx], "5") == 0) {
				np->speed = 1000;
				np->full_duplex = 0;
			} else {
				np->an_enable = 1;
			}
		}
		if (jumbo[card_idx] != 0) {
			np->jumbo = 1;
			dev->mtu = MAX_JUMBO;
		} else {
			np->jumbo = 0;
			if (mtu[card_idx] > 0 && mtu[card_idx] < PACKET_SIZE)
				dev->mtu = mtu[card_idx];
		}
		np->vlan = (vlan[card_idx] > 0 && vlan[card_idx] < 4096) ?
		    vlan[card_idx] : 0;
		if (rx_coalesce > 0 && rx_timeout > 0) {
			np->rx_coalesce = rx_coalesce;
			np->rx_timeout = rx_timeout;
			np->coalesce = 1;
		}
		np->tx_flow = (tx_flow == 0) ? 0 : 1;
		np->rx_flow = (rx_flow == 0) ? 0 : 1;

		if (tx_coalesce < 1)
			tx_coalesce = 1;
		else if (tx_coalesce > TX_RING_SIZE-1)
			tx_coalesce = TX_RING_SIZE - 1;
	}
	dev->open = &rio_open;
	dev->hard_start_xmit = &start_xmit;
	dev->stop = &rio_close;
	dev->get_stats = &get_stats;
	dev->set_multicast_list = &set_multicast;
	dev->do_ioctl = &rio_ioctl;
	dev->tx_timeout = &rio_tx_timeout;
	dev->watchdog_timeo = TX_TIMEOUT;
	dev->change_mtu = &change_mtu;
#if 0
	dev->features = NETIF_F_IP_CSUM;
#endif
	pci_set_drvdata (pdev, dev);

	ring_space = pci_alloc_consistent (pdev, TX_TOTAL_SIZE, &ring_dma);
	if (!ring_space)
		goto err_out_iounmap;
	np->tx_ring = (struct netdev_desc *) ring_space;
	np->tx_ring_dma = ring_dma;

	ring_space = pci_alloc_consistent (pdev, RX_TOTAL_SIZE, &ring_dma);
	if (!ring_space)
		goto err_out_unmap_tx;
	np->rx_ring = (struct netdev_desc *) ring_space;
	np->rx_ring_dma = ring_dma;

	/* Parse eeprom data */
	parse_eeprom (dev);

	/* Find PHY address */
	err = find_miiphy (dev);
	if (err)
		goto err_out_unmap_rx;
	
	/* Fiber device? */
	np->phy_media = (readw(ioaddr + ASICCtrl) & PhyMedia) ? 1 : 0;
	np->link_status = 0;
	/* Set media and reset PHY */
	if (np->phy_media) {
		/* default Auto-Negotiation for fiber deivices */
	 	if (np->an_enable == 2) {
			np->an_enable = 1;
		}
		mii_set_media_pcs (dev);
	} else {
		/* Auto-Negotiation is mandatory for 1000BASE-T,
		   IEEE 802.3ab Annex 28D page 14 */
		if (np->speed == 1000)
			np->an_enable = 1;
		mii_set_media (dev);
	}
	pci_read_config_byte(pdev, PCI_REVISION_ID, &np->pci_rev_id);

	err = register_netdev (dev);
	if (err)
		goto err_out_unmap_rx;

	card_idx++;

	printk (KERN_INFO "%s: %s, %02x:%02x:%02x:%02x:%02x:%02x, IRQ %d\n",
		dev->name, np->name,
		dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
		dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5], irq);
	if (tx_coalesce > 1)
		printk(KERN_INFO "tx_coalesce:\t%d packets\n", 
				tx_coalesce);
	if (np->coalesce)
		printk(KERN_INFO "rx_coalesce:\t%d packets\n"
		       KERN_INFO "rx_timeout: \t%d ns\n", 
				np->rx_coalesce, np->rx_timeout*640);
	if (np->vlan)
		printk(KERN_INFO "vlan(id):\t%d\n", np->vlan);
	return 0;

      err_out_unmap_rx:
	pci_free_consistent (pdev, RX_TOTAL_SIZE, np->rx_ring, np->rx_ring_dma);
      err_out_unmap_tx:
	pci_free_consistent (pdev, TX_TOTAL_SIZE, np->tx_ring, np->tx_ring_dma);
      err_out_iounmap:
#ifdef MEM_MAPPING
	iounmap ((void *) ioaddr);

      err_out_dev:
#endif
	free_netdev (dev);

      err_out_res:
	pci_release_regions (pdev);

      err_out_disable:
	pci_disable_device (pdev);
	return err;
}

int
find_miiphy (struct net_device *dev)
{
	int i, phy_found = 0;
	struct netdev_private *np;
	long ioaddr;
	np = dev->priv;
	ioaddr = dev->base_addr;
	np->phy_addr = 1;

	for (i = 31; i >= 0; i--) {
		int mii_status = mii_read (dev, i, 1);
		if (mii_status != 0xffff && mii_status != 0x0000) {
			np->phy_addr = i;
			phy_found++;
		}
	}
	if (!phy_found) {
		printk (KERN_ERR "%s: No MII PHY found!\n", dev->name);
		return -ENODEV;
	}
	return 0;
}

int
parse_eeprom (struct net_device *dev)
{
	int i, j;
	long ioaddr = dev->base_addr;
	u8 sromdata[256];
	u8 *psib;
	u32 crc;
	PSROM_t psrom = (PSROM_t) sromdata;
	struct netdev_private *np = dev->priv;

	int cid, next;

#ifdef	MEM_MAPPING
	ioaddr = pci_resource_start (np->pdev, 0);
#endif
	/* Read eeprom */
	for (i = 0; i < 128; i++) {
		((u16 *) sromdata)[i] = le16_to_cpu (read_eeprom (ioaddr, i));
	}
#ifdef	MEM_MAPPING
	ioaddr = dev->base_addr;
#endif	
	/* Check CRC */
	crc = ~ether_crc_le (256 - 4, sromdata);
	if (psrom->crc != crc) {
		printk (KERN_ERR "%s: EEPROM data CRC error.\n", dev->name);
		return -1;
	}

	/* Set MAC address */
	for (i = 0; i < 6; i++)
		dev->dev_addr[i] = psrom->mac_addr[i];

	/* Parse Software Infomation Block */
	i = 0x30;
	psib = (u8 *) sromdata;
	do {
		cid = psib[i++];
		next = psib[i++];
		if ((cid == 0 && next == 0) || (cid == 0xff && next == 0xff)) {
			printk (KERN_ERR "Cell data error\n");
			return -1;
		}
		switch (cid) {
		case 0:	/* Format version */
			break;
		case 1:	/* End of cell */
			return 0;
		case 2:	/* Duplex Polarity */
			np->duplex_polarity = psib[i];
			writeb (readb (ioaddr + PhyCtrl) | psib[i],
				ioaddr + PhyCtrl);
			break;
		case 3:	/* Wake Polarity */
			np->wake_polarity = psib[i];
			break;
		case 9:	/* Adapter description */
			j = (next - i > 255) ? 255 : next - i;
			memcpy (np->name, &(psib[i]), j);
			break;
		case 4:
		case 5:
		case 6:
		case 7:
		case 8:	/* Reversed */
			break;
		default:	/* Unknown cell */
			return -1;
		}
		i = next;
	} while (1);

	return 0;
}

static int
rio_open (struct net_device *dev)
{
	struct netdev_private *np = dev->priv;
	long ioaddr = dev->base_addr;
	int i;
	u16 macctrl;
	
	i = request_irq (dev->irq, &rio_interrupt, SA_SHIRQ, dev->name, dev);
	if (i)
		return i;
	
	/* Reset all logic functions */
	writew (GlobalReset | DMAReset | FIFOReset | NetworkReset | HostReset,
		ioaddr + ASICCtrl + 2);
	mdelay(10);
	
	/* DebugCtrl bit 4, 5, 9 must set */
	writel (readl (ioaddr + DebugCtrl) | 0x0230, ioaddr + DebugCtrl);

	/* Jumbo frame */
	if (np->jumbo != 0)
		writew (MAX_JUMBO+14, ioaddr + MaxFrameSize);

	alloc_list (dev);

	/* Get station address */
	for (i = 0; i < 6; i++)
		writeb (dev->dev_addr[i], ioaddr + StationAddr0 + i);

	set_multicast (dev);
	if (np->coalesce) {
		writel (np->rx_coalesce | np->rx_timeout << 16,
			ioaddr + RxDMAIntCtrl);
	}
	/* Set RIO to poll every N*320nsec. */
	writeb (0x20, ioaddr + RxDMAPollPeriod);
	writeb (0xff, ioaddr + TxDMAPollPeriod);
	writeb (0x30, ioaddr + RxDMABurstThresh);
	writeb (0x30, ioaddr + RxDMAUrgentThresh);
	writel (0x0007ffff, ioaddr + RmonStatMask);
	/* clear statistics */