amiga7xx.c

来自「Linux Kernel 2.6.9 for OMAP1710」· C语言 代码 · 共 142 行

C
142
字号
/* * Detection routine for the NCR53c710 based Amiga SCSI Controllers for Linux. *		Amiga MacroSystemUS WarpEngine SCSI controller. *		Amiga Technologies A4000T SCSI controller. *		Amiga Technologies/DKB A4091 SCSI controller. * * Written 1997 by Alan Hourihane <alanh@fairlite.demon.co.uk> * plus modifications of the 53c7xx.c driver to support the Amiga. */#include <linux/types.h>#include <linux/mm.h>#include <linux/blkdev.h>#include <linux/sched.h>#include <linux/version.h>#include <linux/config.h>#include <linux/zorro.h>#include <linux/stat.h>#include <asm/setup.h>#include <asm/page.h>#include <asm/pgtable.h>#include <asm/amigaints.h>#include <asm/amigahw.h>#include <asm/dma.h>#include <asm/irq.h>#include "scsi.h"#include <scsi/scsi_host.h>#include "53c7xx.h"#include "amiga7xx.h"static int amiga7xx_register_one(Scsi_Host_Template *tpnt,				 unsigned long address){    long long options;    int clock;    if (!request_mem_region(address, 0x1000, "ncr53c710"))	return 0;    address = (unsigned long)z_ioremap(address, 0x1000);    options = OPTION_MEMORY_MAPPED | OPTION_DEBUG_TEST1 | OPTION_INTFLY |	      OPTION_SYNCHRONOUS | OPTION_ALWAYS_SYNCHRONOUS |	      OPTION_DISCONNECT;    clock = 50000000;	/* 50 MHz SCSI Clock */    ncr53c7xx_init(tpnt, 0, 710, address, 0, IRQ_AMIGA_PORTS, DMA_NONE,		   options, clock);    return 1;}#ifdef CONFIG_ZORROstatic struct {    zorro_id id;    unsigned long offset;    int absolute;	/* offset is absolute address */} amiga7xx_table[] = {    { .id = ZORRO_PROD_PHASE5_BLIZZARD_603E_PLUS, .offset = 0xf40000,      .absolute = 1 },    { .id = ZORRO_PROD_MACROSYSTEMS_WARP_ENGINE_40xx, .offset = 0x40000 },    { .id = ZORRO_PROD_CBM_A4091_1, .offset = 0x800000 },    { .id = ZORRO_PROD_CBM_A4091_2, .offset = 0x800000 },    { .id = ZORRO_PROD_GVP_GFORCE_040_060, .offset = 0x40000 },    { 0 }};static int __init amiga7xx_zorro_detect(Scsi_Host_Template *tpnt){    int num = 0, i;    struct zorro_dev *z = NULL;    unsigned long address;    while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {	for (i = 0; amiga7xx_table[i].id; i++)	    if (z->id == amiga7xx_table[i].id)		break;	if (!amiga7xx_table[i].id)	    continue;	if (amiga7xx_table[i].absolute)	    address = amiga7xx_table[i].offset;	else	    address = z->resource.start + amiga7xx_table[i].offset;	num += amiga7xx_register_one(tpnt, address);    }    return num;}#endif /* CONFIG_ZORRO */int __init amiga7xx_detect(Scsi_Host_Template *tpnt){    static unsigned char called = 0;    int num = 0;    if (called || !MACH_IS_AMIGA)	return 0;    tpnt->proc_name = "Amiga7xx";    if (AMIGAHW_PRESENT(A4000_SCSI))	num += amiga7xx_register_one(tpnt, 0xdd0040);#ifdef CONFIG_ZORRO    num += amiga7xx_zorro_detect(tpnt);#endif    called = 1;    return num;}static int amiga7xx_release(struct Scsi_Host *shost){	if (shost->irq)		free_irq(shost->irq, NULL);	if (shost->dma_channel != 0xff)		free_dma(shost->dma_channel);	if (shost->io_port && shost->n_io_port)		release_region(shost->io_port, shost->n_io_port);	scsi_unregister(shost);	return 0;}static Scsi_Host_Template driver_template = {	.name			= "Amiga NCR53c710 SCSI",	.detect			= amiga7xx_detect,	.release		= amiga7xx_release,	.queuecommand		= NCR53c7xx_queue_command,	.abort			= NCR53c7xx_abort,	.reset			= NCR53c7xx_reset,	.can_queue		= 24,	.this_id		= 7,	.sg_tablesize		= 63,	.cmd_per_lun		= 3,	.use_clustering		= DISABLE_CLUSTERING};#include "scsi_module.c"

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?