📄 3w-xxxx.h
字号:
/* 3w-xxxx.h -- 3ware Storage Controller device driver for Linux. Written By: Adam Radford <linuxraid@amcc.com> Modifications By: Joel Jacobson <linux@3ware.com> Arnaldo Carvalho de Melo <acme@conectiva.com.br> Brad Strand <linux@3ware.com> Copyright (C) 1999-2004 3ware Inc. Kernel compatiblity By: Andre Hedrick <andre@suse.com> Non-Copyright (C) 2000 Andre Hedrick <andre@suse.com> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; version 2 of the License. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. NO WARRANTY THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is solely responsible for determining the appropriateness of using and distributing the Program and assumes all risks associated with its exercise of rights under this Agreement, including but not limited to the risks and costs of program errors, damage to or loss of data, programs or equipment, and unavailability or interruption of operations. DISCLAIMER OF LIABILITY NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Bugs/Comments/Suggestions should be mailed to: linuxraid@amcc.com For more information, goto: http://www.amcc.com*/#ifndef _3W_XXXX_H#define _3W_XXXX_H#include <linux/version.h>#include <linux/types.h>/* AEN strings */static char *tw_aen_string[] = { [0x000] = "INFO: AEN queue empty", [0x001] = "INFO: Soft reset occurred", [0x002] = "ERROR: Unit degraded: Unit #", [0x003] = "ERROR: Controller error", [0x004] = "ERROR: Rebuild failed: Unit #", [0x005] = "INFO: Rebuild complete: Unit #", [0x006] = "ERROR: Incomplete unit detected: Unit #", [0x007] = "INFO: Initialization complete: Unit #", [0x008] = "WARNING: Unclean shutdown detected: Unit #", [0x009] = "WARNING: ATA port timeout: Port #", [0x00A] = "ERROR: Drive error: Port #", [0x00B] = "INFO: Rebuild started: Unit #", [0x00C] = "INFO: Initialization started: Unit #", [0x00D] = "ERROR: Logical unit deleted: Unit #", [0x00F] = "WARNING: SMART threshold exceeded: Port #", [0x021] = "WARNING: ATA UDMA downgrade: Port #", [0x021] = "WARNING: ATA UDMA upgrade: Port #", [0x023] = "WARNING: Sector repair occurred: Port #", [0x024] = "ERROR: SBUF integrity check failure", [0x025] = "ERROR: Lost cached write: Port #", [0x026] = "ERROR: Drive ECC error detected: Port #", [0x027] = "ERROR: DCB checksum error: Port #", [0x028] = "ERROR: DCB unsupported version: Port #", [0x029] = "INFO: Verify started: Unit #", [0x02A] = "ERROR: Verify failed: Port #", [0x02B] = "INFO: Verify complete: Unit #", [0x02C] = "WARNING: Overwrote bad sector during rebuild: Port #", [0x02D] = "ERROR: Encountered bad sector during rebuild: Port #", [0x02E] = "ERROR: Replacement drive is too small: Port #", [0x02F] = "WARNING: Verify error: Unit not previously initialized: Unit #", [0x030] = "ERROR: Drive not supported: Port #"};/* Sense key lookup table Format: ESDC/flags,SenseKey,AdditionalSenseCode,AdditionalSenseCodeQualifier*/static unsigned char tw_sense_table[][4] ={ /* Codes for newer firmware */ // ATA Error SCSI Error {0x01, 0x03, 0x13, 0x00}, // Address mark not found Address mark not found for data field {0x04, 0x0b, 0x00, 0x00}, // Aborted command Aborted command {0x10, 0x0b, 0x14, 0x00}, // ID not found Recorded entity not found {0x40, 0x03, 0x11, 0x00}, // Uncorrectable ECC error Unrecovered read error {0x61, 0x04, 0x00, 0x00}, // Device fault Hardware error {0x84, 0x0b, 0x47, 0x00}, // Data CRC error SCSI parity error {0xd0, 0x0b, 0x00, 0x00}, // Device busy Aborted command {0xd1, 0x0b, 0x00, 0x00}, // Device busy Aborted command {0x37, 0x02, 0x04, 0x00}, // Unit offline Not ready {0x09, 0x02, 0x04, 0x00}, // Unrecovered disk error Not ready /* Codes for older firmware */ // 3ware Error SCSI Error {0x51, 0x0b, 0x00, 0x00} // Unspecified Aborted command};/* Control register bit definitions */#define TW_CONTROL_CLEAR_HOST_INTERRUPT 0x00080000#define TW_CONTROL_CLEAR_ATTENTION_INTERRUPT 0x00040000#define TW_CONTROL_MASK_COMMAND_INTERRUPT 0x00020000#define TW_CONTROL_MASK_RESPONSE_INTERRUPT 0x00010000#define TW_CONTROL_UNMASK_COMMAND_INTERRUPT 0x00008000#define TW_CONTROL_UNMASK_RESPONSE_INTERRUPT 0x00004000#define TW_CONTROL_CLEAR_ERROR_STATUS 0x00000200#define TW_CONTROL_ISSUE_SOFT_RESET 0x00000100#define TW_CONTROL_ENABLE_INTERRUPTS 0x00000080#define TW_CONTROL_DISABLE_INTERRUPTS 0x00000040#define TW_CONTROL_ISSUE_HOST_INTERRUPT 0x00000020#define TW_CONTROL_CLEAR_PARITY_ERROR 0x00800000#define TW_CONTROL_CLEAR_QUEUE_ERROR 0x00400000#define TW_CONTROL_CLEAR_PCI_ABORT 0x00100000#define TW_CONTROL_CLEAR_SBUF_WRITE_ERROR 0x00000008/* Status register bit definitions */#define TW_STATUS_MAJOR_VERSION_MASK 0xF0000000#define TW_STATUS_MINOR_VERSION_MASK 0x0F000000#define TW_STATUS_PCI_PARITY_ERROR 0x00800000#define TW_STATUS_QUEUE_ERROR 0x00400000#define TW_STATUS_MICROCONTROLLER_ERROR 0x00200000#define TW_STATUS_PCI_ABORT 0x00100000#define TW_STATUS_HOST_INTERRUPT 0x00080000#define TW_STATUS_ATTENTION_INTERRUPT 0x00040000#define TW_STATUS_COMMAND_INTERRUPT 0x00020000#define TW_STATUS_RESPONSE_INTERRUPT 0x00010000#define TW_STATUS_COMMAND_QUEUE_FULL 0x00008000#define TW_STATUS_RESPONSE_QUEUE_EMPTY 0x00004000#define TW_STATUS_MICROCONTROLLER_READY 0x00002000#define TW_STATUS_COMMAND_QUEUE_EMPTY 0x00001000#define TW_STATUS_ALL_INTERRUPTS 0x000F0000#define TW_STATUS_CLEARABLE_BITS 0x00D00000#define TW_STATUS_EXPECTED_BITS 0x00002000#define TW_STATUS_UNEXPECTED_BITS 0x00F00008#define TW_STATUS_SBUF_WRITE_ERROR 0x00000008#define TW_STATUS_VALID_INTERRUPT 0x00DF0008/* RESPONSE QUEUE BIT DEFINITIONS */#define TW_RESPONSE_ID_MASK 0x00000FF0/* PCI related defines */#define TW_IO_ADDRESS_RANGE 0x10#define TW_DEVICE_NAME "3ware Storage Controller"#define TW_VENDOR_ID (0x13C1) /* 3ware */#define TW_DEVICE_ID (0x1000) /* Storage Controller */#define TW_DEVICE_ID2 (0x1001) /* 7000 series controller */#define TW_NUMDEVICES 2#define TW_PCI_CLEAR_PARITY_ERRORS 0xc100#define TW_PCI_CLEAR_PCI_ABORT 0x2000/* Command packet opcodes */#define TW_OP_NOP 0x0#define TW_OP_INIT_CONNECTION 0x1#define TW_OP_READ 0x2#define TW_OP_WRITE 0x3#define TW_OP_VERIFY 0x4#define TW_OP_GET_PARAM 0x12#define TW_OP_SET_PARAM 0x13#define TW_OP_SECTOR_INFO 0x1a#define TW_OP_AEN_LISTEN 0x1c#define TW_OP_FLUSH_CACHE 0x0e#define TW_CMD_PACKET 0x1d#define TW_ATA_PASSTHRU 0x1e#define TW_CMD_PACKET_WITH_DATA 0x1f/* Asynchronous Event Notification (AEN) Codes */#define TW_AEN_QUEUE_EMPTY 0x0000#define TW_AEN_SOFT_RESET 0x0001#define TW_AEN_DEGRADED_MIRROR 0x0002#define TW_AEN_CONTROLLER_ERROR 0x0003#define TW_AEN_REBUILD_FAIL 0x0004#define TW_AEN_REBUILD_DONE 0x0005#define TW_AEN_QUEUE_FULL 0x00ff#define TW_AEN_TABLE_UNDEFINED 0x15#define TW_AEN_APORT_TIMEOUT 0x0009#define TW_AEN_DRIVE_ERROR 0x000A#define TW_AEN_SMART_FAIL 0x000F#define TW_AEN_SBUF_FAIL 0x0024/* Misc defines */#define TW_ALIGNMENT_6000 64 /* 64 bytes */#define TW_ALIGNMENT_7000 4 /* 4 bytes */#define TW_MAX_UNITS 16#define TW_COMMAND_ALIGNMENT_MASK 0x1ff#define TW_INIT_MESSAGE_CREDITS 0x100#define TW_INIT_COMMAND_PACKET_SIZE 0x3#define TW_POLL_MAX_RETRIES 20000#define TW_MAX_SGL_LENGTH 62#define TW_ATA_PASS_SGL_MAX 60#define TW_MAX_PASSTHRU_BYTES 4096#define TW_Q_LENGTH 256#define TW_Q_START 0#define TW_MAX_SLOT 32#define TW_MAX_PCI_BUSES 255#define TW_MAX_RESET_TRIES 3#define TW_UNIT_INFORMATION_TABLE_BASE 0x300#define TW_MAX_CMDS_PER_LUN 254 /* 254 for io, 1 for chrdev ioctl, one for internal aen post */#define TW_BLOCK_SIZE 0x200 /* 512-byte blocks */#define TW_IOCTL 0x80#define TW_UNIT_ONLINE 1#define TW_IN_INTR 1#define TW_IN_IOCTL 2#define TW_IN_CHRDEV_IOCTL 3#define TW_MAX_SECTORS 256#define TW_AEN_WAIT_TIME 1000#define TW_IOCTL_WAIT_TIME (1 * HZ) /* 1 second */#define TW_ISR_DONT_COMPLETE 2#define TW_ISR_DONT_RESULT 3#define TW_IOCTL_TIMEOUT 25 /* 25 seconds */#define TW_IOCTL_CHRDEV_TIMEOUT 60 /* 60 seconds */#define TW_IOCTL_CHRDEV_FREE -1/* Macros */#define TW_STATUS_ERRORS(x) \ (((x & TW_STATUS_PCI_ABORT) || \ (x & TW_STATUS_PCI_PARITY_ERROR) || \ (x & TW_STATUS_QUEUE_ERROR) || \ (x & TW_STATUS_MICROCONTROLLER_ERROR)) && \ (x & TW_STATUS_MICROCONTROLLER_READY))#ifdef TW_DEBUG#define dprintk(msg...) printk(msg)#else#define dprintk(msg...) do { } while(0)#endif
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -