sata_promise.h

来自「Linux Kernel 2.6.9 for OMAP1710」· C头文件 代码 · 共 155 行

H
155
字号
/* *  sata_promise.h - Promise SATA common definitions and inline funcs * *  Copyright 2003-2004 Red Hat, Inc. * *  The contents of this file are subject to the Open *  Software License version 1.1 that can be found at *  http://www.opensource.org/licenses/osl-1.1.txt and is included herein *  by reference. * *  Alternatively, the contents of this file may be used under the terms *  of the GNU General Public License version 2 (the "GPL") as distributed *  in the kernel source COPYING file, in which case the provisions of *  the GPL are applicable instead of the above.  If you wish to allow *  the use of your version of this file only under the terms of the *  GPL and not to allow others to use your version of this file under *  the OSL, indicate your decision by deleting the provisions above and *  replace them with the notice and other provisions required by the GPL. *  If you do not delete the provisions above, a recipient may use your *  version of this file under either the OSL or the GPL. * */#ifndef __SATA_PROMISE_H__#define __SATA_PROMISE_H__#include <linux/ata.h>enum pdc_packet_bits {	PDC_PKT_READ		= (1 << 2),	PDC_PKT_NODATA		= (1 << 3),	PDC_PKT_SIZEMASK	= (1 << 7) | (1 << 6) | (1 << 5),	PDC_PKT_CLEAR_BSY	= (1 << 4),	PDC_PKT_WAIT_DRDY	= (1 << 3) | (1 << 4),	PDC_LAST_REG		= (1 << 3),	PDC_REG_DEVCTL		= (1 << 3) | (1 << 2) | (1 << 1),};static inline unsigned int pdc_pkt_header(struct ata_taskfile *tf,					  dma_addr_t sg_table,					  unsigned int devno, u8 *buf){	u8 dev_reg;	u32 *buf32 = (u32 *) buf;	/* set control bits (byte 0), zero delay seq id (byte 3),	 * and seq id (byte 2)	 */	switch (tf->protocol) {	case ATA_PROT_DMA:		if (!(tf->flags & ATA_TFLAG_WRITE))			buf32[0] = cpu_to_le32(PDC_PKT_READ);		else			buf32[0] = 0;		break;	case ATA_PROT_NODATA:		buf32[0] = cpu_to_le32(PDC_PKT_NODATA);		break;	default:		BUG();		break;	}	buf32[1] = cpu_to_le32(sg_table);	/* S/G table addr */	buf32[2] = 0;				/* no next-packet */	if (devno == 0)		dev_reg = ATA_DEVICE_OBS;	else		dev_reg = ATA_DEVICE_OBS | ATA_DEV1;	/* select device */	buf[12] = (1 << 5) | PDC_PKT_CLEAR_BSY | ATA_REG_DEVICE;	buf[13] = dev_reg;	/* device control register */	buf[14] = (1 << 5) | PDC_REG_DEVCTL;	buf[15] = tf->ctl;	return 16; 	/* offset of next byte */}static inline unsigned int pdc_pkt_footer(struct ata_taskfile *tf, u8 *buf,				  unsigned int i){	if (tf->flags & ATA_TFLAG_DEVICE) {		buf[i++] = (1 << 5) | ATA_REG_DEVICE;		buf[i++] = tf->device;	}	/* and finally the command itself; also includes end-of-pkt marker */	buf[i++] = (1 << 5) | PDC_LAST_REG | ATA_REG_CMD;	buf[i++] = tf->command;	return i;}static inline unsigned int pdc_prep_lba28(struct ata_taskfile *tf, u8 *buf, unsigned int i){	/* the "(1 << 5)" should be read "(count << 5)" */	/* ATA command block registers */	buf[i++] = (1 << 5) | ATA_REG_FEATURE;	buf[i++] = tf->feature;	buf[i++] = (1 << 5) | ATA_REG_NSECT;	buf[i++] = tf->nsect;	buf[i++] = (1 << 5) | ATA_REG_LBAL;	buf[i++] = tf->lbal;	buf[i++] = (1 << 5) | ATA_REG_LBAM;	buf[i++] = tf->lbam;	buf[i++] = (1 << 5) | ATA_REG_LBAH;	buf[i++] = tf->lbah;	return i;}static inline unsigned int pdc_prep_lba48(struct ata_taskfile *tf, u8 *buf, unsigned int i){	/* the "(2 << 5)" should be read "(count << 5)" */	/* ATA command block registers */	buf[i++] = (2 << 5) | ATA_REG_FEATURE;	buf[i++] = tf->hob_feature;	buf[i++] = tf->feature;	buf[i++] = (2 << 5) | ATA_REG_NSECT;	buf[i++] = tf->hob_nsect;	buf[i++] = tf->nsect;	buf[i++] = (2 << 5) | ATA_REG_LBAL;	buf[i++] = tf->hob_lbal;	buf[i++] = tf->lbal;	buf[i++] = (2 << 5) | ATA_REG_LBAM;	buf[i++] = tf->hob_lbam;	buf[i++] = tf->lbam;	buf[i++] = (2 << 5) | ATA_REG_LBAH;	buf[i++] = tf->hob_lbah;	buf[i++] = tf->lbah;	return i;}#endif /* __SATA_PROMISE_H__ */

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?