hosts.h

来自「Linux Kernel 2.6.9 for OMAP1710」· C头文件 代码 · 共 216 行

H
216
字号
#ifndef _IEEE1394_HOSTS_H#define _IEEE1394_HOSTS_H#include <linux/device.h>#include <linux/wait.h>#include <linux/list.h>#include <linux/timer.h>#include <linux/skbuff.h>#include <asm/semaphore.h>#include "ieee1394_types.h"#include "csr.h"struct hpsb_packet;struct hpsb_iso;struct hpsb_host {        struct list_head host_list;        void *hostdata;        atomic_t generation;	struct sk_buff_head pending_packet_queue;	struct timer_list timeout;	unsigned long timeout_interval;        unsigned char iso_listen_count[64];        int node_count; /* number of identified nodes on this bus */        int selfid_count; /* total number of SelfIDs received */	int nodes_active; /* number of nodes that are actually active */        nodeid_t node_id; /* node ID of this host */        nodeid_t irm_id; /* ID of this bus' isochronous resource manager */        nodeid_t busmgr_id; /* ID of this bus' bus manager */        /* this nodes state */        unsigned in_bus_reset:1;        unsigned is_shutdown:1;        /* this nodes' duties on the bus */        unsigned is_root:1;        unsigned is_cycmst:1;        unsigned is_irm:1;        unsigned is_busmgr:1;        int reset_retries;        quadlet_t *topology_map;        u8 *speed_map;        struct csr_control csr;	/* Per node tlabel pool allocation */	struct hpsb_tlabel_pool tpool[64];        struct hpsb_host_driver *driver;	struct pci_dev *pdev;	int id;	struct device device;	struct class_device class_dev;	int update_config_rom;	struct work_struct delayed_reset;	unsigned int config_roms;	struct list_head addr_space;};enum devctl_cmd {        /* Host is requested to reset its bus and cancel all outstanding async         * requests.  If arg == 1, it shall also attempt to become root on the         * bus.  Return void. */        RESET_BUS,        /* Arg is void, return value is the hardware cycle counter value. */        GET_CYCLE_COUNTER,        /* Set the hardware cycle counter to the value in arg, return void.         * FIXME - setting is probably not required. */        SET_CYCLE_COUNTER,        /* Configure hardware for new bus ID in arg, return void. */        SET_BUS_ID,        /* If arg true, start sending cycle start packets, stop if arg == 0.         * Return void. */        ACT_CYCLE_MASTER,        /* Cancel all outstanding async requests without resetting the bus.         * Return void. */        CANCEL_REQUESTS,        /* Start or stop receiving isochronous channel in arg.  Return void.         * This acts as an optimization hint, hosts are not required not to         * listen on unrequested channels. */        ISO_LISTEN_CHANNEL,        ISO_UNLISTEN_CHANNEL};enum isoctl_cmd {	/* rawiso API - see iso.h for the meanings of these commands	   (they correspond exactly to the hpsb_iso_* API functions)	 * INIT = allocate resources	 * START = begin transmission/reception	 * STOP = halt transmission/reception	 * QUEUE/RELEASE = produce/consume packets	 * SHUTDOWN = deallocate resources	 */	XMIT_INIT,	XMIT_START,	XMIT_STOP,	XMIT_QUEUE,	XMIT_SHUTDOWN,	RECV_INIT,	RECV_LISTEN_CHANNEL,   /* multi-channel only */	RECV_UNLISTEN_CHANNEL, /* multi-channel only */	RECV_SET_CHANNEL_MASK, /* multi-channel only; arg is a *u64 */	RECV_START,	RECV_STOP,	RECV_RELEASE,	RECV_SHUTDOWN,	RECV_FLUSH};enum reset_types {        /* 166 microsecond reset -- only type of reset available on           non-1394a capable IEEE 1394 controllers */        LONG_RESET,        /* Short (arbitrated) reset -- only available on 1394a capable           IEEE 1394 capable controllers */        SHORT_RESET,	/* Variants, that set force_root before issueing the bus reset */	LONG_RESET_FORCE_ROOT, SHORT_RESET_FORCE_ROOT,	/* Variants, that clear force_root before issueing the bus reset */	LONG_RESET_NO_FORCE_ROOT, SHORT_RESET_NO_FORCE_ROOT};struct hpsb_host_driver {	struct module *owner;	const char *name;	/* The hardware driver may optionally support a function that is used	 * to set the hardware ConfigROM if the hardware supports handling	 * reads to the ConfigROM on its own. */	void (*set_hw_config_rom) (struct hpsb_host *host, quadlet_t *config_rom);        /* This function shall implement packet transmission based on         * packet->type.  It shall CRC both parts of the packet (unless         * packet->type == raw) and do byte-swapping as necessary or instruct         * the hardware to do so.  It can return immediately after the packet         * was queued for sending.  After sending, hpsb_sent_packet() has to be         * called.  Return 0 on success, negative errno on failure.         * NOTE: The function must be callable in interrupt context.         */        int (*transmit_packet) (struct hpsb_host *host,                                struct hpsb_packet *packet);        /* This function requests miscellanous services from the driver, see         * above for command codes and expected actions.  Return -1 for unknown         * command, though that should never happen.         */        int (*devctl) (struct hpsb_host *host, enum devctl_cmd command, int arg);	 /* ISO transmission/reception functions. Return 0 on success, -1	  * (or -EXXX errno code) on failure. If the low-level driver does not	  * support the new ISO API, set isoctl to NULL.	  */	int (*isoctl) (struct hpsb_iso *iso, enum isoctl_cmd command, unsigned long arg);        /* This function is mainly to redirect local CSR reads/locks to the iso         * management registers (bus manager id, bandwidth available, channels         * available) to the hardware registers in OHCI.  reg is 0,1,2,3 for bus         * mgr, bwdth avail, ch avail hi, ch avail lo respectively (the same ids         * as OHCI uses).  data and compare are the new data and expected data         * respectively, return value is the old value.         */        quadlet_t (*hw_csr_reg) (struct hpsb_host *host, int reg,                                 quadlet_t data, quadlet_t compare);};struct hpsb_host *hpsb_alloc_host(struct hpsb_host_driver *drv, size_t extra,				  struct device *dev);int hpsb_add_host(struct hpsb_host *host);void hpsb_remove_host(struct hpsb_host *h);/* The following 2 functions are deprecated and will be removed when the * raw1394/libraw1394 update is complete. */int hpsb_update_config_rom(struct hpsb_host *host,      const quadlet_t *new_rom, size_t size, unsigned char rom_version);int hpsb_get_config_rom(struct hpsb_host *host, quadlet_t *buffer,      size_t buffersize, size_t *rom_size, unsigned char *rom_version);/* Updates the configuration rom image of a host.  rom_version must be the * current version, otherwise it will fail with return value -1. If this * host does not support config-rom-update, it will return -EINVAL. * Return value 0 indicates success. */int hpsb_update_config_rom_image(struct hpsb_host *host);#endif /* _IEEE1394_HOSTS_H */

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?