mpc8540_ads.c

来自「Linux Kernel 2.6.9 for OMAP1710」· C语言 代码 · 共 236 行

/*
 * arch/ppc/platforms/85xx/mpc8540_ads.c
 *
 * MPC8540ADS board specific routines
 *
 * Maintainer: Kumar Gala <[e-mail]>
 *
 * Copyright 2004 Freescale Semiconductor Inc.
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 */

#include <linux/config.h>
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/reboot.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/major.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/serial.h>
#include <linux/tty.h>	/* for linux/serial_core.h */
#include <linux/serial_core.h>
#include <linux/initrd.h>
#include <linux/module.h>

#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/atomic.h>
#include <asm/time.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/prom.h>
#include <asm/open_pic.h>
#include <asm/bootinfo.h>
#include <asm/pci-bridge.h>
#include <asm/mpc85xx.h>
#include <asm/irq.h>
#include <asm/immap_85xx.h>
#include <asm/kgdb.h>
#include <asm/ocp.h>
#include <mm/mmu_decl.h>

#include <syslib/ppc85xx_common.h>
#include <syslib/ppc85xx_setup.h>

struct ocp_gfar_data mpc85xx_tsec1_def = {
	.interruptTransmit = MPC85xx_IRQ_TSEC1_TX,
	.interruptError = MPC85xx_IRQ_TSEC1_ERROR,
	.interruptReceive = MPC85xx_IRQ_TSEC1_RX,
	.interruptPHY = MPC85xx_IRQ_EXT5,
	.flags = (GFAR_HAS_GIGABIT | GFAR_HAS_MULTI_INTR
			| GFAR_HAS_RMON
			| GFAR_HAS_PHY_INTR | GFAR_HAS_COALESCE),
	.phyid = 0,
	.phyregidx = 0,
};

struct ocp_gfar_data mpc85xx_tsec2_def = {
	.interruptTransmit = MPC85xx_IRQ_TSEC2_TX,
	.interruptError = MPC85xx_IRQ_TSEC2_ERROR,
	.interruptReceive = MPC85xx_IRQ_TSEC2_RX,
	.interruptPHY = MPC85xx_IRQ_EXT5,
	.flags = (GFAR_HAS_GIGABIT | GFAR_HAS_MULTI_INTR
			| GFAR_HAS_RMON
			| GFAR_HAS_PHY_INTR | GFAR_HAS_COALESCE),
	.phyid = 1,
	.phyregidx = 0,
};

struct ocp_gfar_data mpc85xx_fec_def = {
	.interruptTransmit = MPC85xx_IRQ_FEC,
	.interruptError = MPC85xx_IRQ_FEC,
	.interruptReceive = MPC85xx_IRQ_FEC,
	.interruptPHY = MPC85xx_IRQ_EXT5,
	.flags = 0,
	.phyid = 3,
	.phyregidx = 0,
};

struct ocp_fs_i2c_data mpc85xx_i2c1_def = {
	.flags = FS_I2C_SEPARATE_DFSRR,
};

/* ************************************************************************
 *
 * Setup the architecture
 *
 */
static void __init
mpc8540ads_setup_arch(void)
{
	struct ocp_def *def;
	struct ocp_gfar_data *einfo;
	bd_t *binfo = (bd_t *) __res;
	unsigned int freq;

	/* get the core frequency */
	freq = binfo->bi_intfreq;

	if (ppc_md.progress)
		ppc_md.progress("mpc8540ads_setup_arch()", 0);

	/* Set loops_per_jiffy to a half-way reasonable value,
	   for use until calibrate_delay gets called. */
	loops_per_jiffy = freq / HZ;

#ifdef CONFIG_PCI
	/* setup PCI host bridges */
	mpc85xx_setup_hose();
#endif

#ifdef CONFIG_SERIAL_8250
	mpc85xx_early_serial_map();
#endif

#ifdef CONFIG_SERIAL_TEXT_DEBUG
	/* Invalidate the entry we stole earlier the serial ports
	 * should be properly mapped */
	invalidate_tlbcam_entry(NUM_TLBCAMS - 1);
#endif

	def = ocp_get_one_device(OCP_VENDOR_FREESCALE, OCP_FUNC_GFAR, 0);
	if (def) {
		einfo = (struct ocp_gfar_data *) def->additions;
		memcpy(einfo->mac_addr, binfo->bi_enetaddr, 6);
	}

	def = ocp_get_one_device(OCP_VENDOR_FREESCALE, OCP_FUNC_GFAR, 1);
	if (def) {
		einfo = (struct ocp_gfar_data *) def->additions;
		memcpy(einfo->mac_addr, binfo->bi_enet1addr, 6);
	}

	def = ocp_get_one_device(OCP_VENDOR_FREESCALE, OCP_FUNC_GFAR, 2);
	if (def) {
		einfo = (struct ocp_gfar_data *) def->additions;
		memcpy(einfo->mac_addr, binfo->bi_enet2addr, 6);
	}

#ifdef CONFIG_BLK_DEV_INITRD
	if (initrd_start)
		ROOT_DEV = Root_RAM0;
	else
#endif
#ifdef  CONFIG_ROOT_NFS
		ROOT_DEV = Root_NFS;
#else
		ROOT_DEV = Root_HDA1;
#endif

	ocp_for_each_device(mpc85xx_update_paddr_ocp, &(binfo->bi_immr_base));
}

/* ************************************************************************ */
void __init
platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
	      unsigned long r6, unsigned long r7)
{
	/* parse_bootinfo must always be called first */
	parse_bootinfo(find_bootinfo());

	/*
	 * If we were passed in a board information, copy it into the
	 * residual data area.
	 */
	if (r3) {
		memcpy((void *) __res, (void *) (r3 + KERNELBASE),
		       sizeof (bd_t));
	}
#ifdef CONFIG_SERIAL_TEXT_DEBUG
	{
		bd_t *binfo = (bd_t *) __res;

		/* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */
		settlbcam(NUM_TLBCAMS - 1, binfo->bi_immr_base,
			  binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0);
	}
#endif

#if defined(CONFIG_BLK_DEV_INITRD)
	/*
	 * If the init RAM disk has been configured in, and there's a valid
	 * starting address for it, set it up.
	 */
	if (r4) {
		initrd_start = r4 + KERNELBASE;
		initrd_end = r5 + KERNELBASE;
	}
#endif				/* CONFIG_BLK_DEV_INITRD */

	/* Copy the kernel command line arguments to a safe place. */

	if (r6) {
		*(char *) (r7 + KERNELBASE) = 0;
		strcpy(cmd_line, (char *) (r6 + KERNELBASE));
	}

	/* setup the PowerPC module struct */
	ppc_md.setup_arch = mpc8540ads_setup_arch;
	ppc_md.show_cpuinfo = mpc85xx_ads_show_cpuinfo;

	ppc_md.init_IRQ = mpc85xx_ads_init_IRQ;
	ppc_md.get_irq = openpic_get_irq;

	ppc_md.restart = mpc85xx_restart;
	ppc_md.power_off = mpc85xx_power_off;
	ppc_md.halt = mpc85xx_halt;

	ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory;

	ppc_md.time_init = NULL;
	ppc_md.set_rtc_time = NULL;
	ppc_md.get_rtc_time = NULL;
	ppc_md.calibrate_decr = mpc85xx_calibrate_decr;

#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG)
	ppc_md.progress = gen550_progress;
#endif	/* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */

	if (ppc_md.progress)
		ppc_md.progress("mpc8540ads_init(): exit", 0);

	return;
}