pseries_lpar.c

来自「Linux Kernel 2.6.9 for OMAP1710」· C语言 代码 · 共 445 行

C
445
字号
/* * pSeries_lpar.c * Copyright (C) 2001 Todd Inglett, IBM Corporation * * pSeries LPAR support. *  * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. *  * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the * GNU General Public License for more details. *  * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA */#define DEBUG#include <linux/config.h>#include <linux/kernel.h>#include <linux/dma-mapping.h>#include <asm/processor.h>#include <asm/mmu.h>#include <asm/page.h>#include <asm/pgtable.h>#include <asm/machdep.h>#include <asm/abs_addr.h>#include <asm/mmu_context.h>#include <asm/ppcdebug.h>#include <asm/iommu.h>#include <asm/naca.h>#include <asm/tlbflush.h>#include <asm/tlb.h>#include <asm/prom.h>#include <asm/abs_addr.h>#include <asm/cputable.h>#include <asm/plpar_wrappers.h>#ifdef DEBUG#define DBG(fmt...) udbg_printf(fmt)#else#define DBG(fmt...)#endif/* in pSeries_hvCall.S */EXPORT_SYMBOL(plpar_hcall);EXPORT_SYMBOL(plpar_hcall_4out);EXPORT_SYMBOL(plpar_hcall_norets);EXPORT_SYMBOL(plpar_hcall_8arg_2ret);extern void fw_feature_init(void);extern void pSeries_find_serial_port(void);int vtermno;	/* virtual terminal# for udbg  */static void udbg_putcLP(unsigned char c){	char buf[16];	unsigned long rc;	if (c == '\n')		udbg_putcLP('\r');	buf[0] = c;	do {		rc = plpar_put_term_char(vtermno, 1, buf);	} while(rc == H_Busy);}/* Buffered chars getc */static long inbuflen;static long inbuf[2];	/* must be 2 longs */static int udbg_getc_pollLP(void){	/* The interface is tricky because it may return up to 16 chars.	 * We save them statically for future calls to udbg_getc().	 */	char ch, *buf = (char *)inbuf;	int i;	long rc;	if (inbuflen == 0) {		/* get some more chars. */		inbuflen = 0;		rc = plpar_get_term_char(vtermno, &inbuflen, buf);		if (rc != H_Success)			inbuflen = 0;	/* otherwise inbuflen is garbage */	}	if (inbuflen <= 0 || inbuflen > 16) {		/* Catch error case as well as other oddities (corruption) */		inbuflen = 0;		return -1;	}	ch = buf[0];	for (i = 1; i < inbuflen; i++)	/* shuffle them down. */		buf[i-1] = buf[i];	inbuflen--;	return ch;}static unsigned char udbg_getcLP(void){	int ch;	for (;;) {		ch = udbg_getc_pollLP();		if (ch == -1) {			/* This shouldn't be needed...but... */			volatile unsigned long delay;			for (delay=0; delay < 2000000; delay++)				;		} else {			return ch;		}	}}/* call this from early_init() for a working debug console on * vterm capable LPAR machines */void udbg_init_debug_lpar(void){	vtermno = 0;	ppc_md.udbg_putc = udbg_putcLP;	ppc_md.udbg_getc = udbg_getcLP;	ppc_md.udbg_getc_poll = udbg_getc_pollLP;}/* returns 0 if couldn't find or use /chosen/stdout as console */int find_udbg_vterm(void){	struct device_node *stdout_node;	u32 *termno;	char *name;	int found = 0;	/* find the boot console from /chosen/stdout */	if (!of_chosen)		return 0;	name = (char *)get_property(of_chosen, "linux,stdout-path", NULL);	if (name == NULL)		return 0;	stdout_node = of_find_node_by_path(name);	if (!stdout_node)		return 0;	/* now we have the stdout node; figure out what type of device it is. */	name = (char *)get_property(stdout_node, "name", NULL);	if (!name) {		printk(KERN_WARNING "stdout node missing 'name' property!\n");		goto out;	}	if (strncmp(name, "vty", 3) == 0) {		if (device_is_compatible(stdout_node, "hvterm1")) {			termno = (u32 *)get_property(stdout_node, "reg", NULL);			if (termno) {				vtermno = termno[0];				ppc_md.udbg_putc = udbg_putcLP;				ppc_md.udbg_getc = udbg_getcLP;				ppc_md.udbg_getc_poll = udbg_getc_pollLP;				found = 1;			}		} else {			/* XXX implement udbg_putcLP_vtty for hvterm-protocol1 case */			printk(KERN_WARNING "%s doesn't speak hvterm1; "					"can't print udbg messages\n",			       stdout_node->full_name);		}	} else if (strncmp(name, "serial", 6)) {		/* XXX fix ISA serial console */		printk(KERN_WARNING "serial stdout on LPAR ('%s')! "				"can't print udbg messages\n",		       stdout_node->full_name);	} else {		printk(KERN_WARNING "don't know how to print to stdout '%s'\n",		       stdout_node->full_name);	}out:	of_node_put(stdout_node);	return found;}long pSeries_lpar_hpte_insert(unsigned long hpte_group,			      unsigned long va, unsigned long prpn,			      int secondary, unsigned long hpteflags,			      int bolted, int large){	unsigned long arpn = physRpn_to_absRpn(prpn);	unsigned long lpar_rc;	unsigned long flags;	unsigned long slot;	HPTE lhpte;	unsigned long dummy0, dummy1;	/* Fill in the local HPTE with absolute rpn, avpn and flags */	lhpte.dw1.dword1      = 0;	lhpte.dw1.dw1.rpn     = arpn;	lhpte.dw1.flags.flags = hpteflags;	lhpte.dw0.dword0      = 0;	lhpte.dw0.dw0.avpn    = va >> 23;	lhpte.dw0.dw0.h       = secondary;	lhpte.dw0.dw0.bolted  = bolted;	lhpte.dw0.dw0.v       = 1;	if (large) {		lhpte.dw0.dw0.l = 1;		lhpte.dw0.dw0.avpn &= ~0x1UL;	}	/* Now fill in the actual HPTE */	/* Set CEC cookie to 0         */	/* Zero page = 0               */	/* I-cache Invalidate = 0      */	/* I-cache synchronize = 0     */	/* Exact = 0                   */	flags = 0;	/* XXX why is this here? - Anton */	if (hpteflags & (_PAGE_GUARDED|_PAGE_NO_CACHE))		lhpte.dw1.flags.flags &= ~_PAGE_COHERENT;	lpar_rc = plpar_hcall(H_ENTER, flags, hpte_group, lhpte.dw0.dword0,			      lhpte.dw1.dword1, &slot, &dummy0, &dummy1);	if (unlikely(lpar_rc == H_PTEG_Full))		return -1;	/*	 * Since we try and ioremap PHBs we don't own, the pte insert	 * will fail. However we must catch the failure in hash_page	 * or we will loop forever, so return -2 in this case.	 */	if (unlikely(lpar_rc != H_Success))		return -2;	/* Because of iSeries, we have to pass down the secondary	 * bucket bit here as well	 */	return (slot & 7) | (secondary << 3);}static spinlock_t pSeries_lpar_tlbie_lock = SPIN_LOCK_UNLOCKED;static long pSeries_lpar_hpte_remove(unsigned long hpte_group){	unsigned long slot_offset;	unsigned long lpar_rc;	int i;	unsigned long dummy1, dummy2;	/* pick a random slot to start at */	slot_offset = mftb() & 0x7;	for (i = 0; i < HPTES_PER_GROUP; i++) {		/* don't remove a bolted entry */		lpar_rc = plpar_pte_remove(H_ANDCOND, hpte_group + slot_offset,					   (0x1UL << 4), &dummy1, &dummy2);		if (lpar_rc == H_Success)			return i;		BUG_ON(lpar_rc != H_Not_Found);		slot_offset++;		slot_offset &= 0x7;	}	return -1;}static void pSeries_lpar_hptab_clear(void){	unsigned long size_bytes = 1UL << naca->pftSize;	unsigned long hpte_count = size_bytes >> 4;	unsigned long dummy1, dummy2;	int i;	/* TODO: Use bulk call */	for (i = 0; i < hpte_count; i++)		plpar_pte_remove(0, i, 0, &dummy1, &dummy2);}/* * NOTE: for updatepp ops we are fortunate that the linux "newpp" bits and * the low 3 bits of flags happen to line up.  So no transform is needed. * We can probably optimize here and assume the high bits of newpp are * already zero.  For now I am paranoid. */static long pSeries_lpar_hpte_updatepp(unsigned long slot, unsigned long newpp,				       unsigned long va, int large, int local){	unsigned long lpar_rc;	unsigned long flags = (newpp & 7) | H_AVPN;	unsigned long avpn = va >> 23;	if (large)		avpn &= ~0x1UL;	lpar_rc = plpar_pte_protect(flags, slot, (avpn << 7));	if (lpar_rc == H_Not_Found)		return -1;	BUG_ON(lpar_rc != H_Success);	return 0;}static unsigned long pSeries_lpar_hpte_getword0(unsigned long slot){	unsigned long dword0;	unsigned long lpar_rc;	unsigned long dummy_word1;	unsigned long flags;	/* Read 1 pte at a time                        */	/* Do not need RPN to logical page translation */	/* No cross CEC PFT access                     */	flags = 0;	lpar_rc = plpar_pte_read(flags, slot, &dword0, &dummy_word1);	BUG_ON(lpar_rc != H_Success);	return dword0;}static long pSeries_lpar_hpte_find(unsigned long vpn){	unsigned long hash;	unsigned long i, j;	long slot;	union {		unsigned long dword0;		Hpte_dword0 dw0;	} hpte_dw0;	Hpte_dword0 dw0;	hash = hpt_hash(vpn, 0);	for (j = 0; j < 2; j++) {		slot = (hash & htab_data.htab_hash_mask) * HPTES_PER_GROUP;		for (i = 0; i < HPTES_PER_GROUP; i++) {			hpte_dw0.dword0 = pSeries_lpar_hpte_getword0(slot);			dw0 = hpte_dw0.dw0;			if ((dw0.avpn == (vpn >> 11)) && dw0.v &&			    (dw0.h == j)) {				/* HPTE matches */				if (j)					slot = -slot;				return slot;			}			++slot;		}		hash = ~hash;	}	return -1;} static void pSeries_lpar_hpte_updateboltedpp(unsigned long newpp,					     unsigned long ea){	unsigned long lpar_rc;	unsigned long vsid, va, vpn, flags;	long slot;	vsid = get_kernel_vsid(ea);	va = (vsid << 28) | (ea & 0x0fffffff);	vpn = va >> PAGE_SHIFT;	slot = pSeries_lpar_hpte_find(vpn);	BUG_ON(slot == -1);	flags = newpp & 3;	lpar_rc = plpar_pte_protect(flags, slot, 0);	BUG_ON(lpar_rc != H_Success);}static void pSeries_lpar_hpte_invalidate(unsigned long slot, unsigned long va,					 int large, int local){	unsigned long avpn = va >> 23;	unsigned long lpar_rc;	unsigned long dummy1, dummy2;	if (large)		avpn &= ~0x1UL;	lpar_rc = plpar_pte_remove(H_AVPN, slot, (avpn << 7), &dummy1,				   &dummy2);	if (lpar_rc == H_Not_Found)		return;	BUG_ON(lpar_rc != H_Success);}/* * Take a spinlock around flushes to avoid bouncing the hypervisor tlbie * lock. */void pSeries_lpar_flush_hash_range(unsigned long context, unsigned long number,				   int local){	int i;	unsigned long flags;	struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch);	int lock_tlbie = !(cur_cpu_spec->cpu_features & CPU_FTR_LOCKLESS_TLBIE);	if (lock_tlbie)		spin_lock_irqsave(&pSeries_lpar_tlbie_lock, flags);	for (i = 0; i < number; i++)		flush_hash_page(context, batch->addr[i], batch->pte[i], local);	if (lock_tlbie)		spin_unlock_irqrestore(&pSeries_lpar_tlbie_lock, flags);}void hpte_init_lpar(void){	ppc_md.hpte_invalidate	= pSeries_lpar_hpte_invalidate;	ppc_md.hpte_updatepp	= pSeries_lpar_hpte_updatepp;	ppc_md.hpte_updateboltedpp = pSeries_lpar_hpte_updateboltedpp;	ppc_md.hpte_insert	= pSeries_lpar_hpte_insert;	ppc_md.hpte_remove	= pSeries_lpar_hpte_remove;	ppc_md.flush_hash_range	= pSeries_lpar_flush_hash_range;	ppc_md.hpte_clear_all   = pSeries_lpar_hptab_clear;	htab_finish_init();}

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?