bte.c

来自「Linux Kernel 2.6.9 for OMAP1710」· C语言 代码 · 共 446 行

/*
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file "COPYING" in the main directory of this archive
 * for more details.
 *
 * Copyright (c) 2000-2003 Silicon Graphics, Inc.  All Rights Reserved.
 */

#include <linux/config.h>
#include <linux/module.h>
#include <asm/sn/sgi.h>
#include <asm/sn/nodepda.h>
#include <asm/sn/addrs.h>
#include <asm/sn/arch.h>
#include <asm/sn/sn_cpuid.h>
#include <asm/sn/pda.h>
#include <asm/sn/sn2/shubio.h>
#include <asm/nodedata.h>

#include <linux/bootmem.h>
#include <linux/string.h>
#include <linux/sched.h>

#include <asm/sn/bte.h>

#ifndef L1_CACHE_MASK
#define L1_CACHE_MASK (L1_CACHE_BYTES - 1)
#endif

/* two interfaces on two btes */
#define MAX_INTERFACES_TO_TRY		4

static struct bteinfo_s *
bte_if_on_node(nasid_t nasid, int interface)
{
	nodepda_t *tmp_nodepda;

	tmp_nodepda = NODEPDA(nasid_to_cnodeid(nasid));
	return &tmp_nodepda->bte_if[interface];

}


/************************************************************************
 * Block Transfer Engine copy related functions.
 *
 ***********************************************************************/


/*
 * bte_copy(src, dest, len, mode, notification)
 *
 * Use the block transfer engine to move kernel memory from src to dest
 * using the assigned mode.
 *
 * Paramaters:
 *   src - physical address of the transfer source.
 *   dest - physical address of the transfer destination.
 *   len - number of bytes to transfer from source to dest.
 *   mode - hardware defined.  See reference information
 *          for IBCT0/1 in the SHUB Programmers Reference
 *   notification - kernel virtual address of the notification cache
 *                  line.  If NULL, the default is used and
 *                  the bte_copy is synchronous.
 *
 * NOTE:  This function requires src, dest, and len to
 * be cacheline aligned.
 */
bte_result_t
bte_copy(u64 src, u64 dest, u64 len, u64 mode, void *notification)
{
	u64 transfer_size;
	u64 transfer_stat;
	struct bteinfo_s *bte;
	bte_result_t bte_status;
	unsigned long irq_flags;
	struct bteinfo_s *btes_to_try[MAX_INTERFACES_TO_TRY];
	int bte_if_index;


	BTE_PRINTK(("bte_copy(0x%lx, 0x%lx, 0x%lx, 0x%lx, 0x%p)\n",
		    src, dest, len, mode, notification));

	if (len == 0) {
		return BTE_SUCCESS;
	}

	ASSERT(!((len & L1_CACHE_MASK) ||
		 (src & L1_CACHE_MASK) || (dest & L1_CACHE_MASK)));
	ASSERT(len < ((BTE_LEN_MASK + 1) << L1_CACHE_SHIFT));

	if (mode & BTE_USE_DEST) {
		/* try remote then local */
		btes_to_try[0] = bte_if_on_node(NASID_GET(dest), 0);
		btes_to_try[1] = bte_if_on_node(NASID_GET(dest), 1);
		if (mode & BTE_USE_ANY) {
			btes_to_try[2] = bte_if_on_node(get_nasid(), 0);
			btes_to_try[3] = bte_if_on_node(get_nasid(), 1);
		} else {
			btes_to_try[2] = NULL;
			btes_to_try[3] = NULL;
		}
	} else {
		/* try local then remote */
		btes_to_try[0] = bte_if_on_node(get_nasid(), 0);
		btes_to_try[1] = bte_if_on_node(get_nasid(), 1);
		if (mode & BTE_USE_ANY) {
			btes_to_try[2] = bte_if_on_node(NASID_GET(dest), 0);
			btes_to_try[3] = bte_if_on_node(NASID_GET(dest), 1);
		} else {
			btes_to_try[2] = NULL;
			btes_to_try[3] = NULL;
		}
	}

	do {
		local_irq_save(irq_flags);

		bte_if_index = 0;

		/* Attempt to lock one of the BTE interfaces. */
		while (bte_if_index < MAX_INTERFACES_TO_TRY) {
			bte = btes_to_try[bte_if_index++];

			if (bte == NULL) {
				continue;
			}

			if (spin_trylock(&bte->spinlock)) {
				if ((*bte->most_rcnt_na & BTE_ACTIVE) ||
				    (BTE_LNSTAT_LOAD(bte) & BTE_ACTIVE)) {
					/* Got the lock but BTE still busy */
					spin_unlock(&bte->spinlock);
					bte = NULL;
				} else {
					/* we got the lock and it's not busy */
					break;
				}
			}
		}

		if (bte != NULL) {
			break;
		}

		local_irq_restore(irq_flags);

		if (!(mode & BTE_WACQUIRE)) {
			return BTEFAIL_NOTAVAIL;
		}
	} while (1);


	if (notification == NULL) {
		/* User does not want to be notified. */
		bte->most_rcnt_na = &bte->notify;
	} else {
		bte->most_rcnt_na = notification;
	}

	/* Calculate the number of cache lines to transfer. */
	transfer_size = ((len >> L1_CACHE_SHIFT) & BTE_LEN_MASK);

	/* Initialize the notification to a known value. */
	*bte->most_rcnt_na = -1L;

	/* Set the status reg busy bit and transfer length */
	BTE_PRINTKV(("IBLS = 0x%lx\n", IBLS_BUSY | transfer_size));
	BTE_LNSTAT_STORE(bte, IBLS_BUSY | transfer_size);

	/* Set the source and destination registers */
	BTE_PRINTKV(("IBSA = 0x%lx)\n", (TO_PHYS(src))));
	BTE_SRC_STORE(bte, TO_PHYS(src));
	BTE_PRINTKV(("IBDA = 0x%lx)\n", (TO_PHYS(dest))));
	BTE_DEST_STORE(bte, TO_PHYS(dest));

	/* Set the notification register */
	BTE_PRINTKV(("IBNA = 0x%lx)\n", 
		     TO_PHYS(ia64_tpa((unsigned long)bte->most_rcnt_na))));
	BTE_NOTIF_STORE(bte, TO_PHYS(ia64_tpa((unsigned long)bte->most_rcnt_na)));


	/* Initiate the transfer */
	BTE_PRINTK(("IBCT = 0x%lx)\n", BTE_VALID_MODE(mode)));
	BTE_CTRL_STORE(bte, BTE_VALID_MODE(mode));

	spin_unlock_irqrestore(&bte->spinlock, irq_flags);


	if (notification != NULL) {
		return BTE_SUCCESS;
	}

	while ((transfer_stat = *bte->most_rcnt_na) == -1UL) {
	}


	BTE_PRINTKV((" Delay Done.  IBLS = 0x%lx, most_rcnt_na = 0x%lx\n",
				BTE_LNSTAT_LOAD(bte), *bte->most_rcnt_na));

	if (transfer_stat & IBLS_ERROR) {
		bte_status = transfer_stat & ~IBLS_ERROR;
		*bte->most_rcnt_na = 0L;
	} else {
		bte_status = BTE_SUCCESS;
	}
	BTE_PRINTK(("Returning status is 0x%lx and most_rcnt_na is 0x%lx\n",
				BTE_LNSTAT_LOAD(bte), *bte->most_rcnt_na));

	return bte_status;
}
EXPORT_SYMBOL(bte_copy);


/*
 * bte_unaligned_copy(src, dest, len, mode)
 *
 * use the block transfer engine to move kernel
 * memory from src to dest using the assigned mode.
 *
 * Paramaters:
 *   src - physical address of the transfer source.
 *   dest - physical address of the transfer destination.
 *   len - number of bytes to transfer from source to dest.
 *   mode - hardware defined.  See reference information
 *          for IBCT0/1 in the SGI documentation.
 *
 * NOTE: If the source, dest, and len are all cache line aligned,
 * then it would be _FAR_ preferrable to use bte_copy instead.
 */
bte_result_t
bte_unaligned_copy(u64 src, u64 dest, u64 len, u64 mode)
{
	int destFirstCacheOffset;
	u64 headBteSource;
	u64 headBteLen;
	u64 headBcopySrcOffset;
	u64 headBcopyDest;
	u64 headBcopyLen;
	u64 footBteSource;
	u64 footBteLen;
	u64 footBcopyDest;
	u64 footBcopyLen;
	bte_result_t rv;
	char *bteBlock, *bteBlock_unaligned;

	if (len == 0) {
		return BTE_SUCCESS;
	}

	/* temporary buffer used during unaligned transfers */
	bteBlock_unaligned = kmalloc(len + 3 * L1_CACHE_BYTES,
				     GFP_KERNEL | GFP_DMA);
	if (bteBlock_unaligned == NULL) {
		return BTEFAIL_NOTAVAIL;
	}
	bteBlock = (char *) L1_CACHE_ALIGN((u64) bteBlock_unaligned);

	headBcopySrcOffset = src & L1_CACHE_MASK;
	destFirstCacheOffset = dest & L1_CACHE_MASK;

	/*
	 * At this point, the transfer is broken into
	 * (up to) three sections.  The first section is
	 * from the start address to the first physical
	 * cache line, the second is from the first physical
	 * cache line to the last complete cache line,
	 * and the third is from the last cache line to the
	 * end of the buffer.  The first and third sections
	 * are handled by bte copying into a temporary buffer
	 * and then bcopy'ing the necessary section into the
	 * final location.  The middle section is handled with
	 * a standard bte copy.
	 *
	 * One nasty exception to the above rule is when the
	 * source and destination are not symetrically
	 * mis-aligned.  If the source offset from the first
	 * cache line is different from the destination offset,
	 * we make the first section be the entire transfer
	 * and the bcopy the entire block into place.
	 */
	if (headBcopySrcOffset == destFirstCacheOffset) {

		/*
		 * Both the source and destination are the same
		 * distance from a cache line boundary so we can
		 * use the bte to transfer the bulk of the
		 * data.
		 */
		headBteSource = src & ~L1_CACHE_MASK;
		headBcopyDest = dest;
		if (headBcopySrcOffset) {
			headBcopyLen =
			    (len >
			     (L1_CACHE_BYTES -
			      headBcopySrcOffset) ? L1_CACHE_BYTES
			     - headBcopySrcOffset : len);
			headBteLen = L1_CACHE_BYTES;
		} else {
			headBcopyLen = 0;
			headBteLen = 0;
		}

		if (len > headBcopyLen) {
			footBcopyLen =
			    (len - headBcopyLen) & L1_CACHE_MASK;
			footBteLen = L1_CACHE_BYTES;

			footBteSource = src + len - footBcopyLen;
			footBcopyDest = dest + len - footBcopyLen;

			if (footBcopyDest ==
			    (headBcopyDest + headBcopyLen)) {
				/*
				 * We have two contigous bcopy
				 * blocks.  Merge them.
				 */
				headBcopyLen += footBcopyLen;
				headBteLen += footBteLen;
			} else if (footBcopyLen > 0) {
				rv = bte_copy(footBteSource,
					      ia64_tpa((unsigned long)bteBlock),
					      footBteLen, mode, NULL);
				if (rv != BTE_SUCCESS) {
					kfree(bteBlock_unaligned);
					return rv;
				}


				memcpy(__va(footBcopyDest),
				       (char *) bteBlock, footBcopyLen);
			}
		} else {
			footBcopyLen = 0;
			footBteLen = 0;
		}

		if (len > (headBcopyLen + footBcopyLen)) {
			/* now transfer the middle. */
			rv = bte_copy((src + headBcopyLen),
				      (dest +
				       headBcopyLen),
				      (len - headBcopyLen -
				       footBcopyLen), mode, NULL);
			if (rv != BTE_SUCCESS) {
				kfree(bteBlock_unaligned);
				return rv;
			}

		}
	} else {


		/*
		 * The transfer is not symetric, we will
		 * allocate a buffer large enough for all the
		 * data, bte_copy into that buffer and then
		 * bcopy to the destination.
		 */

		/* Add the leader from source */
		headBteLen = len + (src & L1_CACHE_MASK);
		/* Add the trailing bytes from footer. */
		headBteLen +=
		    L1_CACHE_BYTES - (headBteLen & L1_CACHE_MASK);
		headBteSource = src & ~L1_CACHE_MASK;
		headBcopySrcOffset = src & L1_CACHE_MASK;
		headBcopyDest = dest;
		headBcopyLen = len;
	}

	if (headBcopyLen > 0) {
		rv = bte_copy(headBteSource,
			      ia64_tpa((unsigned long)bteBlock), headBteLen, mode, NULL);
		if (rv != BTE_SUCCESS) {
			kfree(bteBlock_unaligned);
			return rv;
		}

		memcpy(__va(headBcopyDest), ((char *) bteBlock +
					     headBcopySrcOffset),
		       headBcopyLen);
	}
	kfree(bteBlock_unaligned);
	return BTE_SUCCESS;
}
EXPORT_SYMBOL(bte_unaligned_copy);


/************************************************************************
 * Block Transfer Engine initialization functions.
 *
 ***********************************************************************/


/*
 * bte_init_node(nodepda, cnode)
 *
 * Initialize the nodepda structure with BTE base addresses and
 * spinlocks.
 */
void
bte_init_node(nodepda_t * mynodepda, cnodeid_t cnode)
{
	int i;


	/*
	 * Indicate that all the block transfer engines on this node
	 * are available.
	 */

	/*
	 * Allocate one bte_recover_t structure per node.  It holds
	 * the recovery lock for node.  All the bte interface structures
	 * will point at this one bte_recover structure to get the lock.
	 */
	spin_lock_init(&mynodepda->bte_recovery_lock);
	init_timer(&mynodepda->bte_recovery_timer);
	mynodepda->bte_recovery_timer.function = bte_error_handler;
	mynodepda->bte_recovery_timer.data = (unsigned long) mynodepda;

	for (i = 0; i < BTES_PER_NODE; i++) {
		/* Which link status register should we use? */
		unsigned long link_status = (i == 0 ? IIO_IBLS0 : IIO_IBLS1);
		mynodepda->bte_if[i].bte_base_addr = (u64 *)
			REMOTE_HUB_ADDR(cnodeid_to_nasid(cnode), link_status);

		/*
		 * Initialize the notification and spinlock
		 * so the first transfer can occur.
		 */
		mynodepda->bte_if[i].most_rcnt_na =
		    &(mynodepda->bte_if[i].notify);
		mynodepda->bte_if[i].notify = 0L;
		spin_lock_init(&mynodepda->bte_if[i].spinlock);

		mynodepda->bte_if[i].bte_cnode = cnode;
		mynodepda->bte_if[i].bte_error_count = 0;
		mynodepda->bte_if[i].bte_num = i;
		mynodepda->bte_if[i].cleanup_active = 0;
		mynodepda->bte_if[i].bh_error = 0;
	}

}