06a-906-032-bgp.lbl

這是一個自動的testing program, 用於VA用送

;
; VAG-COM label file
;
; VW Golf/Jetta (1K)
;
; component: Engine (#01) - BGP/BGQ
;
; p/n: 06A 906 032 ??
;
; includes measuring blocks
;
; This file is part of a redirection package,
; make sure you have all of the following files.
;
; 06-01.LBL
; 06A-906-032-BGP.LBL (2.5l E   @ 150 HP - BGP/BGQ)
;
; by Sebastian Stange ([e-mail])
;
; last modification: 03/24/2005
;
; ready for VAG-COM 405.0 and above
;
;
;---------------------------------------------------
;
; measuring block informations
;
;---------------------------------------------------
;
;
001,1,Engine Speed,,Specification (cold):  1400 RPM (w/o gear) / 1000 RPM (w gear) | Specification (above 60 癈): 780 RPM | Specification (low Battery): 950 RPM
001,2,Coolant,Temperature
001,3,Lambda,Controller,Specification: -10.0...+10.0
001,4,Basic Setting,Requirements,see labelfile
; 1xxxxxxx - Coolant temperature below 80 癈
; x1xxxxxx - Engine speed below 2000 RPM
; xx1xxxxx - Throttle valve closed
; xxx1xxxx - Lambda regulation correct
; xxxx1xxx - State of idle
; xxxxx1xx - A/C system compressor deactivated
; xxxxxx1x - Catalytic converter temperature OK
; xxxxxxx1 - No malfunction detected by Self-Diagnosis
;
002,1,Engine Speed
002,2,Engine Load,,Specification: 16...35 %
002,3,Injection,Timing
002,4,Intake Air Mass
;
003,1,Engine Speed
003,2,Intake Air Mass
003,3,Throttle Drive,Angle Sensor 1,for EPC (G187) | Display Range: 0...100 %
003,4,Ignition,Timing Angle
;
004,1,Engine Speed
004,2,Voltage Supply
004,3,Coolant,Temperature
004,4,Intake Air,Temperature
;
005,1,Engine Speed
005,2,Engine Load,,Specification: 16...35 %
005,3,Speed
005,4,Load Status,,Display Range: Idle/Partial Throttle/Wide Open Throttle (WOT)/Enrichment/Deceleration
;
006,1,Engine Speed
006,2,Engine Load,,Specification: 16...35 %
006,3,Intake Air,Temperature
006,4,Heights Correction,Factor,Display Range: 0% = 0 m / 100% = 10000 m
;
010,0,Ignition
010,1,Engine Speed
010,2,Engine Load,,Specification: 16...35 %
010,3,Throttle Drive,Angle Sensor 1,for EPC (G187) | Display Range: 0...100 %
010,4,Ignition,Timing Angle
;
011,0,Ignition
011,1,Engine Speed
011,2,Coolant,Temperature
011,3,Intake Air,Temperature
011,4,Ignition,Timing Angle
;
014,0,Misfire Recognition
014,1,Engine Speed
014,2,Engine Load,,Specification: 16...35 %
014,3,Sum of Ignition,Malfunctions,Specification: < 8
014,4,Malfunction,Recognition
;
015,0,Misfire Recognition
015,1,Cylinder 1,,Specification: < 2
015,2,Cylinder 2,,Specification: < 2
015,3,Cylinder 3,,Specification: < 2
015,4,Malfunction,Recognition
;
016,0,Misfire Recognition
016,1,Cylinder 4,,Specification: < 2
016,2,Cylinder 5,,Specification: < 2
;
020,0,Ignition Timing Angle  Retardation
020,1,Cylinder 1 Ignition,Angle Delay,Specification: < 2
020,2,Cylinder 2 Ignition,Angle Delay,Specification: < 2
020,3,Cylinder 3 Ignition,Angle Delay,Specification: < 2
020,4,Cylinder 4 Ignition,Angle Delay,Specification: < 2
;
021,0,Ignition Timing Angle  Retardation
021,1,Cylinder 5 Ignition,Angle Delay,Specification: < 2
;
022,0,Ignition Timing Angle  Retardation
022,1,Engine Speed
022,2,Engine Load,,Specification: 16...35 %
022,3,Cylinder 1 Ignition,Angle Delay,Specification: < 2
022,4,Cylinder 2 Ignition,Angle Delay,Specification: < 2
;
023,0,Ignition Timing Angle  Retardation
023,1,Engine Speed
023,2,Engine Load,,Specification: 16...35 %
023,3,Cylinder 3 Ignition,Angle Delay,Specification: < 2
023,4,Cylinder 4 Ignition,Angle Delay,Specification: < 2
;
024,0,Ignition Timing Angle  Retardation
024,1,Engine Speed
024,2,Engine Load,,Specification: 16...35 %
024,3,Cylinder 5 Ignition,Angle Delay,Specification: < 2
;
026,0,Knock Sensor Voltage
026,1,Voltage Cyl. 1,Knock Sensor,Specification: < 5
026,2,Voltage Cyl. 2,Knock Sensor,Specification: < 5
026,3,Voltage Cyl. 3,Knock Sensor,Specification: < 5
026,4,Voltage Cyl. 4,Knock Sensor,Specification: < 5
;
027,0,Knock Sensor Voltage
027,1,Voltage Cyl. 5,Knock Sensor,Specification: < 5
;
028,1,Engine Speed
028,2,Engine Load,,Specification: 16...35 %
028,3,Coolant,Temperature
028,4,Result,Knock Sensor Test,Display Range: Test ON/Test OFF/Syst. OK/Syst. not OK
;
030,0,Oxygen Sensor Status
030,1,Bank 1,Sensor 1,see labelfile
; 1xxxx - Oxygen sensor control cyl. 1 active
; x1xxx - Catalytic converter evacuation function active
; xx1xx - Sensor heater
; xxx1x - Oxygen sensor ready
; xxxx1 - Lambda regulation active
030,2,Bank 1,Sensor 2,see labelfile
; 1xxx - Enabling factor P
; x1xx - Sensor heater
; xx1x - Oxygen sensor ready
; xxx1 - Oxygen sensor control active
030,3,Bank 1,Sensor 3,see labelfile
; 1xxx - Enabling factor P
; x1xx - Sensor heater
; xx1x - Oxygen sensor ready
; xxx1 - Oxygen sensor control active
;
031,1,Lambda Sensor,Current Value
031,2,Lambda Sensor,Specified Value
;
032,1,Lambda (Idle),Self-Adaptation,Specification: -5...+5
032,2,Lambda (Partial),Self-Adaptation,Specification: -10...+10
;
033,1,Bank 1,Lambda Control
033,2,Bank 1 Voltage,of Oxygen Sensors
;
034,1,Engine Speed
034,2,Catalytic Converter,Temperature,,,
034,3,Period,Duration Sensor,Specification: > 0.21
034,4,Result,Lambda Aging,Display Range: Test ON/Test OFF/B1-S1 not OK/B1-S1 OK
;
036,1,Bank 1 Sensor 2,Voltage
036,2,Result,Lambda Availability,Display Range: Test ON/Test OFF/B1-S2 not OK/B1-S2 OK
036,3,Bank 1 Sensor 3,Voltage
036,4,Result,Lambda Availability,Display Range: Test ON/Test OFF/B1-S3 not OK/B1-S3 OK
;
037,1,Engine Load,,Specification: 16...35 %
037,2,Front Oxygen,Sensor Voltage
037,4,Result,Lambda Sensor,Display Range: Test ON/Test OFF/Syst. OK/Syst. not OK
;
039,1,Bank 1 Sensor 2,Voltage
039,2,Bank 1 Sensor 3,Voltage
039,3,Signal Counter
039,4,Result,Lambda Exchange,Display Range: Test ON/Test OFF/Syst. OK/Syst. not OK
;
041,1,Resistance,Bank 1 Sensor 1
041,2,Heater Condition
041,3,Resistance,Bank 1 Sensor 2,Specification: 96...608
041,4,Heater Condition
;
042,1,Resistance,Bank 1 Sensor 3,Specification: 96...424
042,2,Heater Condition
;
043,1,Engine Speed
043,2,Catalytic Converter,Temperature
043,3,Bank 1 Sensor 2,Voltage
043,4,Result,Lambda Aging,Display Range: Test ON/Test OFF/B1-S2 not OK/B1-S2 OK
;
044,1,Engine Speed
044,2,Catalytic Converter,Temperature
044,3,Bank 1 Sensor 3,Voltage
044,4,Result,Lambda Aging,Display Range: Test ON/Test OFF/B1-S3 not OK/B1-S3 OK
;
046,1,Engine Speed
046,2,Catalytic Converter,Temperature
046,3,Amplitude,Behavior
046,4,Result Catalytic,Conversion,Pre-Catalytic Converter (Display Range: Test ON/Test OFF/CatConvB1 not OK/CatConvB1 OK)
;
047,1,Engine Speed
047,2,Catalytic Converter,Temperature
047,3,Amplitude Behavior
047,4,Result Catalytic,Conversion,Pre-Catalytic Converter (Display Range: Test ON/Test OFF/CatConvB1 not OK/CatConvB1 OK)
;
050,1,Engine Speed
050,2,Engine Speed,(Specified)
050,3,Condition,of A/C system,Display Range: A/C-High / A/C-Low
050,4,Operating condition,of A/C Compressor,Display Range: Compr.ON/Compr.OFF
;
051,1,Engine Speed
051,2,Engine Speed,(Specified)
051,3,Selected Gear,,Display Range: P or N = 0/Gear = 1 - 6/R = 7
051,4,Voltage Supply
;
052,1,Engine Speed
052,2,Engine Speed,(Specified)
052,3,Condition,of A/C system,Display Range: A/C-High / A/C-Low
;
054,1,Engine Speed
054,2,Load Status,,Display Range: Idle/Partial Throttle/Wide Open Throttle (WOT)/Enrichment/Deceleration
054,3,Sender 2 for,Acc. Pedal Pos.,G79 (Display Range 0...100 %)
054,4,Throttle Drive,Angle Sensor 1,for EPC (G187) | Display Range: 0...100 %
;
055,1,Engine Speed
055,2,Idle Regulator
055,3,Idle Stabilization,Self-Adaptation
055,4,Load Status
;
056,1,Engine Speed
056,2,Engine Speed,(Specified)
056,3,Idle Stabilization,Self-Adaptation
056,4,Load Status
;
057,1,Engine Speed
057,2,Engine Speed,(Specified)
057,3,Operating condition,of A/C Compressor,Display Range: Compr.ON/Compr.OFF
057,4,A/C Compressor,Working Status,Display Range: ON/OFF/reducing
;
060,1,Throttle Drive,Angle Sensor 1,for EPC (G187) | Display Range: 0...100 %
060,2,Throttle Drive,Angle Sensor 2,for EPC (G188) | Display Range: 0...100 %
060,3,Self-Adaptation,Steps Counter
060,4,Result,Throttle Valve Adp.,Display Range: ADP runs/ADP OK/ADP ERROR
;
061,1,Engine Speed
061,2,Voltage Supply
061,3,Throttle Drive,Angle Sensor 1,for EPC (G187) | Display Range: 0...100 %
061,4,Load Status
;
062,1,Throttle Drive,Angle Sensor 1,for EPC (G187) | Display Range: 0...100 %