8a0-907-404.lbl

這是一個自動的testing program, 用於VA用送

;
; VAG-COM Lable File for
; 8A0-907-404
; Engine Code 9A
; 16 Valve, 2.0 Liter
; CIS-E Motronic
; USA Aplications:
; Golf GTI  1990-1992
; Jetta GLI 1990-1992
; Passat GL 1990-1993
; Scource Bently Publishing VD95 "Scan Tool Companion"
; created  10/28/03
; modified 02/07/04 
; by consch(at)earthlink.net
; Tested-92 Passat 02/11/04
;
0,0,Click on fields for details.
;
0,1,Engine Coolent temp,220-35 Corresponds to 0.2C to 106.6C
;
0,2,Engine Load,40-64 Corresponds to Warm at idle,255 Corresponds to Wide Open Throttle
;
0,3,Engine Speed,20-250 Corresponds to 480-6000 RPM
;
0,4,Idle Air Control (Adaptive Value),0-24 or 232-255,A value within either range is OK
;
0,5,Idle Air Control (working Value),0-48 or 206-255,A value within either range is OK
;
0,6,Differential Fuel Pressure Regulator (Working Value),0-50 Means 000 to +10 mA,206-255 Means -10 to -.001 mA
;
0,7,Differential Fuel Pressure Regulator (Adaptive Value),-228-128 Means +10 to +00 mA,128-28 Means -00 to -10 mA
;    
0,8,Vehicle Speed,0=Stationary,1-50 Increase with speed
;
0,9,ECM Input Signals-Add values to get Spec!,Open lable file for Value Details
;
; Value-Meaning:
;______________________________________________________
;|  000 Automatic trans in gear                       |
;| +001 CTP switch (F60) closed                       |
;| +002 Wot switch (f81) closed                       |
;| +004 Manual Xsmission or Auto Xmission in P or n   |
;| +008 AC compressor on                              |
;| +032 Shift signal Auto Xmiss                       |
;| +064 Fuel enrichment                               |
;| +110 Decel shut-off,or                             |
;| +(128)Decel shut off                               |
;|-----------------------                             |
;| Equals Displayed Value                             |
;|____________________________________________________|
;
0,10,Ignition Timeing (Calculateted By ECM),48-230 Means 43.13 BTDC to 21.86 ATDC
;
;This file is supported in 08 measuring blocks and 04 basic settings
;
;This ECM also supports 03 Output Tests
;
;Differential Pressure Regulator-N73
;Evap Canister Purge Valve-N80
;Idle Air Control Valve-N71
;Cold-Start Injector-N17
;
;eor