038-906-019-150.lbl

這是一個自動的testing program, 用於VA用送

;038-906-019: Engines: 1.9 PD ARL(150hp)
;Eric Maurier [e-mail] / http://www.vag.com.fr
;
;
;Measuring block 000 data at idle, engine warm, coolant >=80癈
;0,1-Engine Speed            ;36-42(790-870rpm)
;All 4WD models              ;41-46(860-945rpm)
;0,2-Start of Injection      ;113-133(4癇TDC-2癆TDC)
;0,3-Trottle Position        ;0(0%) 
;0,4-Injection Quantity      ;11-33(3.0-9.0 mg/H)
;0;5-Manifold Absolute Press.;88-113(900-1150mbar)
;0,6-Atmospheric Pressure    ;181-222(900-1110mbar)
;0,7-Engine Coolant Temp.    ;80-36(80-110癈) 
;0,8-Intake Manifold Temp.   ;189-51(5-100癈) 
;0,9-Fuel Temperature        ;85-184 (20-90癈)
;0,10-Air Mass(EGR on)       ;63-111(210-370 mg/H)
;EGR is switched off after approx. 2 min. of idle (>2min, restart eng. or blip)
;
;Measuring block 000 data at full load, 3rd gear, temp 80癈, at 3000 rpm
;0,1-Engine Speed            ;136-150(2850-3150rpm)
;0,2-Start of Injection      ;82-60(14癇TDC-21癇TDC)
;0,3-Trottle Position        ;255(100%)
;0,4-Injection Quantity      ;189-219(52-60mg/H)
;0;5-Manifold Absolute Press.;215-255(2200-2600mbar)
;0,6-Atmospheric Pressure    ;181-222(900-1110mbar)
;0,7-Engine Coolant Temp.    ;80-35(80-110癈)
;0,8-Intake Manifold Temp.   ;189-51(5-100癈)
;0,9-Fuel Temperature        ;85-199(20-100癈)
;0,10-Air Mass               ;>255(100 mg/H)
; 

1,0,Injected quantity
1,1,Engine speed,790-870
;4WD:860-945 
1,2,Injected quantity,3.0-9.0
1,3,Spec. Inj. duration,3-8 癈k.
1,4,Coolant temp,80-110癈

2,0,Idle Speed (See label file for #3)
2,1,Engine speed,790-870
;4WD:860-945 
2,2,Throttle pos,0%
2,3,Operating Cond/AC,speed/throttle/AC
;xxx
;  1 AC compressor switched on
; 1  Throttle Position switch closed
;1   Inc. idle speed as AC switched on
2,4,Coolant Temp,80-110癈

3,0,EGR (Exhaust Gases Recycling)
3,1,Engine speed,790-870
;4WD:860-945
3,2,MAF (specified),230-350
3,3,MAF (actual),210-370
3,4,EGR duty cycle,40-75%

4,0,Unit Injectors valves command
4,1,Engine speed,790-870
;4WD:860-945
4,2,Spec start of inj.,4BTDC-2ATDC
4,3,Spec inj. duration,3-8 癈k.
4,4,Synchro. angle,-3..+3癈k.
;
;Group 4 : full load, 3rd gear, 3000 rpm
;4,1:2850-3150rpm
;4,2:Spec start of inj. 14-21