3d0-959-933.lbl

這是一個自動的testing program, 用於VA用送

029,4,Lock motor,thermal protection,Specified Value:yes/no/not installed - basic lock
;
030,0,Vehicle Inclination Sensor (Tow-away protection)
030,1,G384 Sensor,status,Specified Value:operated/not operated/not installed
030,2,G384 Sensor,alarm detect,Specified Value:operated/not operated/not installed
030,3,Deactivate,Inclination Sensor,Specified Value:E360 Button - operated/not operated/not installed
;
031,0,Vehicle Inclination Sensor - voltage supply
031,1,G384,voltage,Specified Value: 9...14.5
;
032,0,Vehicle Inclination Sensor - current angle
032,1,G384 angle,,Specified Value: plus 25 degrees to minus 25 degrees/implausable signal/no measured value/not installed
;
033,0,Inclination Sensor Angles
033,1,Reference angle,Y-axis
033,2,Current angle, Y-axis
;Remark: This information taken from the Touareg measuring value block PDF.
;
034,0,*Next Block Used is Block 80
;
080,0,Manufacturer work number and identification
; Date of manufacture
; Manufacturer changing status
; Manufacturer test stand no.
; Running manufacturer no.
; e.g. BPA = Bosch factory Ansbach
;
;
;---------------------------------------------------
;
; coding information
;
;---------------------------------------------------
;
;
C00,Phaeton Central Control Module for Comfort System (J393) Coding
C01,Codes applicable to PN 3D0 959 933:
C02,    
C03,00040 Automatic opening and closing trunk lid
C04,00032 No automatic opening and closing trunk lid - but with closing assist
C05,00034 No automatic opening and closing trunk lid - without closing assist
C06, 
C07,00000 This appears to be a valid coding for all configurations on PN 7L0 907 719.
C08,  
C09,There are probably other code possibilities but they are not known.
C10,
;
;Remark: Need to get Sebastian to look further into this.  See 8E0 959 433  and also 4E0 910 289 for ideas.
;This is not the place where remote window control is enabled - the author of this file observed a Phaeton with 
;remote window control capability that had '40' entered as the code for this controller (it had the 3D0 controller, not the 7L0 one).
;My guess is that the answer lies in adaptation channel 1 of address 09, Central Electrical (3D0 937 049).
;
;
;---------------------------------------------------
;
; adaptation information
;
;---------------------------------------------------
;
;Remark: Channels 12 to 21 are not available
;        Channels 22, 23 , and 24 relate to calibration of the trunk lid (J605 calibration)
;        Channel 25 deals with enabling window operation via the remote control key, but this is not the only value that needs to be changed to enable this.
;        Channel 26 sets the 15 second delay if the door is opened with a confused remote control key blade.
;        Channel 27 "O2-REG-ON TNF 013 049 Enabled" - need to ask Sebastian about this. Don't mess with it, changing the value causes problems with address 09 communication.
;        Channels 28 to 200 not available, beyond 200, who knows.
;
;
A001,0,Number of Doors to unlock when unlocking is activated
A001,5,
A001,6,Here you can choose what combination of doors unlock when
A001,7,an unlock signal is sent to the car by any means.
A001,8,   
A001,9,Choices: 0 = All 4 doors unlock. 1 = Driver Door Unlocks
A001,10,                2 = Both doors on Driver Side unlock.
;
A002,0,Auto-Lock Preferences
A002,5,Auto-Lock upon driving away
A002,6,The doors will lock automatically when the
A002,7,vehicle reaches a speed of 15 km/h or 10 mph.
A002,8,  
A002,9,Choices: 0 = off / 1 = on
;
A003,0,Auto-Unlock Preferences
A003,5,Auto-Unlock upon key removal from ignition
A003,6,The doors will unlock automatically when the
A003,7,key is removed from the ignition switch.
A003,8,  
A003,9,Choices: 0 = off / 1 = on
;
A004,0,Unlock Notification via Kessey (keyless) preferences
A004,5,Unlock Notification via keyless access
A004,6,Notification when unlocking via keyless access (door handle touch sensor).
A004,7, 
A004,8,Choices:  
A004,9,0 = nothing. 1 = blink. 2 = beep. 
A004,10,3 = blink and beep
;
A005,0,Unlock Notification via remote control button preferences
A005,5,Unlock Notification 
A005,6,Notification  when unlocking via remote control pushbuttons.
A005,7, 
A005,8,Choices:  
A005,9,0 = nothing. 1 = blink. 2 = beep.
A005,10,3 = blink and beep
;
A006,0,Unlock Notification via key blade in door lock preferences
A006,5,Unlock Notification 
A006,6,Notification when unlocking via remote control pushbuttons.
A006,7, 
A006,8,Choices:  
A006,9,0 = nothing. 1 = blink. 2 = beep. 
A006,10,3 = blink and beep
;
A007,0,Locking Confirmation via Kessey (keyless) preferences
A007,5,Locking Confirmation via keyless access
A007,6,Notification when unlocking via keyless access (door handle touch sensor).
A007,7, 
A007,8,Choices:  
A007,9,0 = nothing. 1 = blink. 2 = beep. 
A007,10,3 = blink and beep
;
A008,0,Locking Confirmation via remote control button preferences
A008,5,Locking Confirmation 
A008,6,Notification when unlocking via remote control pushbuttons.
A008,7, 
A008,8,Choices:  
A008,9,0 = nothing. 1 = blink. 2 = beep.
A008,10,3 = blink and beep 
;
A009,0,Locking Confirmation via key blade in door lock preferences
A009,5,Locking Confirmation 
A009,6,Notification when unlocking via remote control pushbuttons.
A009,7, 
A009,8,Choices: 
A009,9,0 = nothing. 1 = blink. 2 = beep. 
A009,10,3 = blink and beep
;
A010,0,Notification when 'safed' (Interior and tow-away alarms turned off)
A010,5,Safing Confirmation 
A010,6,Notification when safing alarm system.
A010,7, 
A010,8,Choices: 
A010,9,0 = nothing. 1 = blink. 2 = beep. 
A010,10,3 = blink and beep
;
A011,0,Type of sound that the alarm horn makes (compliance with noise regulations)
A011,5,Type of Alarm Sound
A011,6,Type of Alarm Sound
A011,8,Choices:
A011,9,1 = Rest of World  2 = Germany
A011,10,3 = United Kingdom
;
A022,0,Adaptation of J605 controller (motorized trunk lid) - closed position
;
A023,0,Adaptation of J605 controller (motorized trunk lid) - open position
;
;Remark: The above two functions are used whenever a new J605 controller is installed.
;Once the J605 has been adapted, it can usually be re-adapted (if it becomes confused, for example,
;by activation of pinch protection, or changing direction in the middle of a cycle) by simply moving
;- by hand - the trunk lid to the fully open position, then pressing the 'trunk lid release' button
;on the key fob remote, and observing that the two tail-lights blink in recognition.  Once that is done,
;the trunk lid can then be closed by pressing the close button located on the bottom lip of the trunk lid.
;It should not be necessary to have to use a scan tool to re-adapt a confused trunk lid mechanism.
;
A024,0,Adaptation of J605 controller (motorized trunk lid) - unknown function
;
A025,0,Enabling of window and sunroof control from remote control key fob
A025,5,Enabling remote key fob operation of windows, sunroof
A025,6,This is not the only thing that needs to be changed to enable this capability.
A025,7,
A025,8,Choices:
A025,9,0 = not enabled / 1 = enabled
;
A026,0,Enabling of 15 second delay of alarm sound following manual door unlocking with confused key
A026,5,Enabling of 15 second alarm delay
A026,6,Enabling of 15 second alarm delay
A026,7,
A026,8,Choices:
A026,9,0 = no delay / 1 = 15 second delay before alarm sounds
;
A027,0,Totally unknown function - click on block 3 for more information
;Could this refer to the auto-lock function in channel 2?
A027,2,Always seems to, be TNF 013 049
A027,8,Two values are known: 1 = enabled (default) and 2 = auto-lock
;