4z7-907-553.lbl

這是一個自動的testing program, 用於VA用送

;
; VAG-COM Measuring Block Labels file.
; Module 34 -- Level Control
; This module seems very timing sensitive, be sure to close any unneeded background tasks
;
;
; from USA 2001 Audi allroad quattro 2.7T biturbo
; ECU p/n  :  4Z7-907-553B
; Component:  - 2C1A1          X031  
; Soft Coding:  25500
; Shop#:  WSC 09999
;
; **Modification history**
; created:  Paul Cunningham, 26 November 2001
; updated:  Paul Cunningham, 18 March 2003
; please email any comments or corrections: [e-mail]
;
;
;  Have not yet found:
;     Indicators related to manual mode button (MY2001)
;     Indicator related to 'jack mode'
;     Several 'unknown' variables
;
;  Certain conditions may not be observable, since VAG-COM requires ignition to be on,
;     but control module operates even with ignition off.
;
;  Adaptation channels:
;     Not logged in:
;        Only channel is 10, default value 0
;        Appears to be 1=Jack mode
;        
;     Logged in (LoginCode = 31564)
;        Suspension calibration can be performed. See "Nebuchadnezzar's" write up on AudiWorld
;           for complete information. 
;           http://forums.audiworld.com/allroad/msgs/32165.phtml
;        Channels 01-04 correspond to the four corners of your vehicle.
;        01 = Left Front
;        02 = Right Front
;        03 = Left Rear
;        04 = Right Rear
;
;
;  Observed values are indicated in parenthesis
;  Bentley manual was not available at time of writing
;
1,0,  
1,1,Voltage1,(varies)
1,2,Voltage2,(varies)
1,3,Speed,Km/h
1,4,(Term. 50 OFF)
;   Is terminal 50 in fuse box? Trailer?
;   Fuse 35 is labeled for trailer
;
;
2,0,
2,1,Door status,Open|Closed
;   Any door will trigger this
2,2,Trailer status,No
2,3,Voltage3,(4.95V)
2,4,[Text 000 089]
;
;		
3,0, 
;   No apparent indicator for Manual|Auto mode
3,1,Status UpButton,Not Oper.|Activated
;   Status is Activated only when button is held down
3,2,Duplicate,UpButton?
;   Seems unusual to be duplicate, but it is?
3,3,Status DnButton,Not Oper.|Activated
3,4,Pump relay,OFF|ON
;   This appears to be for the actual relay, pump status is in value 6,4
;
;
4,0,Level control sensors
;   These values are very dynamic and change as the vehicle moves
;   They change even as the car travels over bumps
;   First two values are for front, unknown if left|right or right|left
;   Second two values are for rear
;
;   Sample data at rest
;    37mm,  41mm,  37mm,  41mm level 4 (highest)
;    21mm,  26mm,  20mm,  27mm level 3
;   - 3mm,   2mm,  -4mm,   2mm level 2
;   -29mm, -27mm, -31mm, -27mm level 1 (lowest)
;
;
4,1,Height,Front1
4,2,Height,Front2
4,3,Height,Rear1
4,4,Height,Rear2
;
;
5,0,Suspension unit extension
;   Could these be extension distance for each shock? No units are given.
;   Could also be pressure, but more distance seems more likely.
;   On this car the fourth value is sometimes significantly higher than 3rd.
;
;   Sample data at rest
;   174, 170, 179, 192 level 4
;   160, 160, 167, 183 level 3
;   136, 135, 144, 161 level 2
;   114, 107, 123, 134 level 1
;
5,1,Front1,no units
5,2,Front2,no units
5,3,Rear1,no units
5,4,Rear2,no units
;
;
6,0,
6,1,Pump temp,(5-95C)
6,2,Reservoir pressure,(3.58-15.96 bar)
6,3,Reservoir valve,OFF=Closed
;   6,3 ON briefly during level change, normal=OFF
;   After shocks are filled, appears to bleed off reservoir
;   Appears to open when shocks are being deflated
6,4,Pump,ON|OFF
;
;
7,0,Shock valve status (ON=OPEN)
;   Note that valve can be open during filling or deflating
7,1,Front valve1,ON|OFF
7,2,Front valve2,ON|OFF
7,3,Rear valve1,ON|OFF
7,4,Rear valve2,ON|OFF
;
;
8,0,WXYZ: W-3=Level X=0 Y=Engine status Z=Active component (see file)
8,1,Always ON,(Ignition?)
8,2,Valve/Switch,(ON|OFF)
;   8,2 ON briefly during level change, normal=OFF
;   Turns on briefly when either front or rear valves open
8,3,(9999)
8,4,WXYZ,see file
;
;   W minus 3 indicates level (either current or new requested level)
;   X is always zero? Ignition on? Doesn't indicate Jack Mode.
;   Y = 1 engine off
;     = 2 engine on
;     = 4 car in motion
;   Z = 0 static
;     = 1 pump active
;     = 2 two shocks active
;     = 3 one shock active (fine tuning)
;
;   Sample data
;   7020 engine on,  level 4
;
;   6021 engine on,  going up to 3 from 2
;   6020 engine on,  level 3
;
;   5021 engine on,  going up to 2 from 1
;   5020 engine on,  level 2
;   5010 engine off, level 2
;
;   4040 car moving, level 1
;   4023 engine on,  going down to 1 from 2, one shock active
;   4022 engine on,  going down to 1 from 2
;   4020 engine on,  level 1
;   4012 engine off, going down to 1 from 2, no pump
;   4010 engine off, level 1
;
;
;*** No blocks 9-79, next is 80,81 & 86,87 ***
;
;
80,0,Undocumented appears static
80,1,(blank)
80,2,(blank)
80,3,(binary),text
80,4,(binary),text
;
;
81,0,Undocumented appears static
81,1,(binary),text
81,2,(binary),text
81,3,(binary),text
81,4,(blank)
;
;
86,0,A1040F59.R1G
86,1,(A1040F59.R),text
86,2,(1G),text
86,3,(N/A)
86,4,(N/A)
;
;
87,0,A1040F57.R26
87,1,(A1040F57.),text
87,2,(R26),text
87,3,(N/A)
87,4,(N/A)
;
;
;<end of file>