rx_int_eval.opt

基于cc1010的设计实例

### uVision2 Project, (C) Keil Software
### Do not modify !

 cExt (*.c)
 aExt (*.s*; *.src; *.a*)
 oExt (*.obj)
 lExt (*.lib)
 tExt (*.txt; *.h; *.inc)
 pExt (*.plm)
 CppX (*.cpp)
 DaveTm { 0,0,0,0,0,0,0,0 }

Target (CC1010 868 MHz), 0x0000 // Tools: 'MCS-51'
Target (CC1010 433 MHz), 0x0000 // Tools: 'MCS-51'
Target (CC1010 915 MHz), 0x0000 // Tools: 'MCS-51'
GRPOPT 1,(Source Group 1),1,0,0

OPTFFF 1,1,1,536870914,0,2,2,0,<.\rx_int.c><rx_int.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0,0,0,0,0,0,0,0,246,3,0,0,90,3,0,0 }
OPTFFF 1,2,1,0,0,0,0,0,<G:\02_Interne_prosjekter\02500_interne_tekniske_prosjekter\02527_CC1010DK\02527_3_Des\CC1010IDE\Lib\Chipcon\Hal\RFCalib.c><RFCalib.c> 
OPTFFF 1,3,1,0,0,0,0,0,<G:\02_Interne_prosjekter\02500_interne_tekniske_prosjekter\02527_CC1010DK\02527_3_Des\CC1010IDE\Lib\Chipcon\Hal\RFSetRxTxOff.c><RFSetRxTxOff.c> 
OPTFFF 1,4,1,0,0,0,0,0,<G:\02_Interne_prosjekter\02500_interne_tekniske_prosjekter\02527_CC1010DK\02527_3_Des\CC1010IDE\Lib\Chipcon\Hal\uarts.c><uarts.c> 
OPTFFF 1,5,1,0,0,0,0,0,<..\..\..\..\Lib\Chipcon\Hal\RFReadRSSIlevel.c><RFReadRSSIlevel.c> 
OPTFFF 1,6,1,0,0,0,0,0,<..\..\..\..\Lib\Chipcon\Hal\Wait.c><Wait.c> 
OPTFFF 1,7,1,0,0,0,0,0,<..\..\..\..\Lib\Chipcon\Hal\ConfigADC.c><ConfigADC.c> 


TARGOPT 1, (CC1010 868 MHz)
 CLK51=14745600
  OPTTT 1,1,1,0
  OPTHX 0,65535,0,0,0
  OPTLX 120,65,8,<.\>
  OPTOX 16
  OPTLT 1,1,1,0,1,1,0,1,0,0,0,0
  OPTXL 1,1,1,1,1,1,1,0,0
  OPTFL 1,0,0
  OPTDL (S8051.DLL)()(DP51.DLL)(-p550)(S8051.DLL)()(cc1010disp.DLL)(-p550)
  OPTDBG 2046,-1,()()()()()()()()()() (BIN\CC1010MON.DLL)()()()
  OPTDF 0x0
  OPTLE <>
  OPTLC <>
EndOpt

TARGOPT 2, (CC1010 433 MHz)
 CLK51=14745600
  OPTTT 1,1,1,0
  OPTHX 0,65535,0,0,0
  OPTLX 120,65,8,<.\>
  OPTOX 16
  OPTLT 1,1,1,0,1,1,0,1,0,0,0,0
  OPTXL 1,1,1,1,1,1,1,0,0
  OPTFL 1,0,0
  OPTDL (S8051.DLL)()(DP51.DLL)(-p550)(S8051.DLL)()(cc1010disp.DLL)(-p550)
  OPTDBG 2046,-1,()()()()()()()()()() (BIN\CC1010MON.DLL)()()()
  OPTDF 0x0
  OPTLE <>
  OPTLC <>
EndOpt

TARGOPT 3, (CC1010 915 MHz)
 CLK51=14745600
  OPTTT 1,1,1,0
  OPTHX 0,65535,0,0,0
  OPTLX 120,65,8,<.\>
  OPTOX 16
  OPTLT 1,1,1,0,1,1,0,1,0,0,0,0
  OPTXL 1,1,1,1,1,1,1,0,0
  OPTFL 1,0,1
  OPTDL (S8051.DLL)()(DP51.DLL)(-p550)(S8051.DLL)()(cc1010disp.DLL)(-p550)
  OPTDBG 2046,-1,()()()()()()()()()() (BIN\CC1010MON.DLL)()()()
  OPTDF 0x0
  OPTLE <>
  OPTLC <>
EndOpt