wixprojectex.xpt

来自「c#源代码」· XPT 代码 · 共 774 行 · 第 1/5 页

      <Error Id="1604">The product '[2]' is already installed, preventing the installation of this product. The two products are incompatible.</Error>
      <Error Id="1605">There is not enough disk space on the volume '[2]' to continue the install with recovery enabled. [3] KB are required, but only [4] KB are available. Click Ignore to continue the install without saving recovery information, click Retry to check for available space again, or click Cancel to quit the installation.</Error>
      <Error Id="1606">Could not access network location [2].</Error>
      <Error Id="1607">The following applications should be closed before continuing the install:</Error>
      <Error Id="1608">Could not find any previously installed compliant products on the machine for installing this product.</Error>
      <Error Id="1609">An error occurred while applying security settings. [2] is not a valid user or group. This could be a problem with the package, or a problem connecting to a domain controller on the network. Check your network connection and click Retry, or Cancel to end the install. {{Unable to locate the user's SID, system error [3]}}</Error>
      <Error Id="1701">The key [2] is not valid. Verify that you entered the correct key.</Error>
      <Error Id="1702">The installer must restart your system before configuration of [2] can continue. Click Yes to restart now or No if you plan to manually restart later.</Error>
      <Error Id="1703">You must restart your system for the configuration changes made to [2] to take effect. Click Yes to restart now or No if you plan to manually restart later.</Error>
      <Error Id="1704">An installation for [2] is currently suspended. You must undo the changes made by that installation to continue. Do you want to undo those changes?</Error>
      <Error Id="1705">A previous installation for this product is in progress. You must undo the changes made by that installation to continue. Do you want to undo those changes?</Error>
      <Error Id="1706">An installation package for the product [2] cannot be found. Try the installation again using a valid copy of the installation package '[3]'.</Error>
      <Error Id="1707">Installation completed successfully.</Error>
      <Error Id="1708">Installation failed.</Error>
      <Error Id="1709">Product: [2] -- [3]</Error>
      <Error Id="1710">You may either restore your computer to its previous state or continue the install later. Would you like to restore?</Error>
      <Error Id="1711">An error occurred while writing installation information to disk. Check to make sure enough disk space is available, and click Retry, or Cancel to end the install.</Error>
      <Error Id="1712">One or more of the files required to restore your computer to its previous state could not be found. Restoration will not be possible.</Error>
      <Error Id="1713">[2] cannot install one of its required products. Contact your technical support group. {{System Error: [3].}}</Error>
      <Error Id="1714">The older version of [2] cannot be removed. Contact your technical support group. {{System Error [3].}}</Error>
      <Error Id="1715">Installed [2]</Error>
      <Error Id="1716">Configured [2]</Error>
      <Error Id="1717">Removed [2]</Error>
      <Error Id="1718">File [2] was rejected by digital signature policy.</Error>
      <Error Id="1719">The Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode, or if the Windows Installer is not correctly installed. Contact your support personnel for assistance.</Error>
      <Error Id="1720">There is a problem with this Windows Installer package. A script required for this install to complete could not be run. Contact your support personnel or package vendor. {{Custom action [2] script error [3], [4]: [5] Line [6], Column [7], [8] }}</Error>
      <Error Id="1721">There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor. {{Action: [2], location: [3], command: [4] }}</Error>
      <Error Id="1722">There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. {{Action [2], location: [3], command: [4] }}</Error>
      <Error Id="1723">There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor. {{Action [2], entry: [3], library: [4] }}</Error>
      <Error Id="1724">Removal completed successfully.</Error>
      <Error Id="1725">Removal failed.</Error>
      <Error Id="1726">Advertisement completed successfully.</Error>
      <Error Id="1727">Advertisement failed.</Error>
      <Error Id="1728">Configuration completed successfully.</Error>
      <Error Id="1729">Configuration failed.</Error>
      <Error Id="1730">You must be an Administrator to remove this application. To remove this application, you can log on as an Administrator, or contact your technical support group for assistance.</Error>
      <Error Id="1801">The path [2] is not valid. Please specify a valid path.</Error>
      <Error Id="1802">Out of memory. Shut down other applications before retrying.</Error>
      <Error Id="1803">There is no disk in drive [2]. Please insert one and click Retry, or click Cancel to go back to the previously selected volume.</Error>
      <Error Id="1804">There is no disk in drive [2]. Please insert one and click Retry, or click Cancel to return to the browse dialog and select a different volume.</Error>
      <Error Id="1805">The folder [2] does not exist. Please enter a path to an existing folder.</Error>
      <Error Id="1806">You have insufficient privileges to read this folder.</Error>
      <Error Id="1807">A valid destination folder for the install could not be determined.</Error>
      <Error Id="1901">Error attempting to read from the source install database: [2].</Error>
      <Error Id="1902">Scheduling reboot operation: Renaming file [2] to [3]. Must reboot to complete operation.</Error>
      <Error Id="1903">Scheduling reboot operation: Deleting file [2]. Must reboot to complete operation.</Error>
      <Error Id="1904">Module [2] failed to register. HRESULT [3]. Contact your support personnel.</Error>
      <Error Id="1905">Module [2] failed to unregister. HRESULT [3]. Contact your support personnel.</Error>
      <Error Id="1906">Failed to cache package [2]. Error: [3]. Contact your support personnel.</Error>
      <Error Id="1907">Could not register font [2]. Verify that you have sufficient permissions to install fonts, and that the system supports this font.</Error>
      <Error Id="1908">Could not unregister font [2]. Verify that you that you have sufficient permissions to remove fonts.</Error>
      <Error Id="1909">Could not create Shortcut [2]. Verify that the destination folder exists and that you can access it.</Error>
      <Error Id="1910">Could not remove Shortcut [2]. Verify that the shortcut file exists and that you can access it.</Error>
      <Error Id="1911">Could not register type library for file [2]. Contact your support personnel.</Error>
      <Error Id="1912">Could not unregister type library for file [2]. Contact your support personnel.</Error>
      <Error Id="1913">Could not update the ini file [2][3]. Verify that the file exists and that you can access it.</Error>
      <Error Id="1914">Could not schedule file [2] to replace file [3] on reboot. Verify that you have write permissions to file [3].</Error>
      <Error Id="1915">Error removing ODBC driver manager, ODBC error [2]: [3]. Contact your support personnel.</Error>
      <Error Id="1916">Error installing ODBC driver manager, ODBC error [2]: [3]. Contact your support personnel.</Error>
      <Error Id="1917">Error removing ODBC driver: [4], ODBC error [2]: [3]. Verify that you have sufficient privileges to remove ODBC drivers.</Error>
      <Error Id="1918">Error installing ODBC driver: [4], ODBC error [2]: [3]. Verify that the file [4] exists and that you can access it.</Error>
      <Error Id="1919">Error configuring ODBC data source: [4], ODBC error [2]: [3]. Verify that the file [4] exists and that you can access it.</Error>
      <Error Id="1920">Service '[2]' ([3]) failed to start. Verify that you have sufficient privileges to start system services.</Error>
      <Error Id="1921">Service '[2]' ([3]) could not be stopped. Verify that you have sufficient privileges to stop system services.</Error>
      <Error Id="1922">Service '[2]' ([3]) could not be deleted. Verify that you have sufficient privileges to remove system services.</Error>
      <Error Id="1923">Service '[2]' ([3]) could not be installed. Verify that you have sufficient privileges to install system services.</Error>
      <Error Id="1924">Could not update environment variable '[2]'. Verify that you have sufficient privileges to modify environment variables.</Error>
      <Error Id="1925">You do not have sufficient privileges to complete this installation for all users of the machine. Log on as administrator and then retry this installation.</Error>
      <Error Id="1926">Could not set file security for file '[3]'. Error: [2]. Verify that you have sufficient privileges to modify the security permissions for this file.</Error>
      <Error Id="1927">Component Services (COM+ 1.0) are not installed on this computer. This installation requires Component Services in order to complete successfully. Component Services are available on Windows 2000.</Error>
      <Error Id="1928">Error registering COM+ Application. Contact your support personnel for more information.</Error>
      <Error Id="1929">Error unregistering COM+ Application. Contact your support personnel for more information.</Error>
      <Error Id="1930">The description for service '[2]' ([3]) could not be changed.</Error>
      <Error Id="1931">The Windows Installer service cannot update the system file [2] because the file is protected by Windows. You may need to update your operating system for this program to work correctly. {{Package version: [3], OS Protected version: [4]}}</Error>
      <Error Id="1932">The Windows Installer service cannot update the protected Windows file [2]. {{Package version: [3], OS Protected version: [4], SFP Error: [5]}}</Error>
      <Error Id="1933">The Windows Installer service cannot update one or more protected Windows files. {{SFP Error: [2]. List of protected files:\r\n[3]}}</Error>
      <Error Id="1934">User installations are disabled via policy on the machine.</Error>
      <Error Id="1935">An error occured during the installation of assembly component [2]. HRESULT: [3]. {{assembly interface: [4], function: [5], assembly name: [6]}}</Error>

      <Property Id="DefaultUIFont">DlgFont8</Property>
      <Property Id="ErrorDialog">ErrorDlg</Property>

      <Dialog Id="AdminWelcomeDlg" Width="370" Height="270" Title="[ProductName] [Setup]" NoMinimize="yes">
        <Control Id="Next" Type="PushButton" X="236" Y="243" Width="56" Height="17" Default="yes" Text="[ButtonText_Next]">
          <Publish Property="InstallMode" Value="Server Image">1</Publish>
          <Publish Event="NewDialog" Value="AdminRegistrationDlg">ShowUserRegistrationDlg = 1</Publish>
          <Publish Event="NewDialog" Value="AdminInstallPointDlg">ShowUserRegistrationDlg &lt;&gt; 1</Publish>
        </Control>
        <Control Id="Cancel" Type="PushButton" X="304" Y="243" Width="56" Height="17" Cancel="yes" Text="[ButtonText_Cancel]">
          <Publish Event="SpawnDialog" Value="CancelDlg">1</Publish>
        </Control>
        <Control Id="Bitmap" Type="Bitmap" X="0" Y="0" Width="370" Height="234" TabSkip="no" Text="[DialogBitmap]" />
        <Control Id="Back" Type="PushButton" X="180" Y="243" Width="56" Height="17" Disabled="yes" Text="[ButtonText_Back]" />
        <Control Id="Description" Type="Text" X="135" Y="70" Width="220" Height="30" Transparent="yes" NoPrefix="yes">
          <Text>The [Wizard] will create a server image of [ProductName], at a specified network location. Click Next to continue or Cancel to exit the [Wizard].</Text>
        </Control>
        <Control Id="BottomLine" Type="Line" X="0" Y="234" Width="370" Height="0" />
        <Control Id="Title" Type="Text" X="135" Y="20" Width="220" Height="60" Transparent="yes" NoPrefix="yes">
          <Text>{\VerdanaBold13}Welcome to the [ProductName] [Wizard]</Text>
        </Control>
      </Dialog>

      <Dialog Id="PrepareDlg" Width="370" Height="270" Title="[ProductName] [Setup]" Modeless="yes">
        <Control Id="Cancel" Type="PushButton" X="304" Y="243" Width="56" Height="17" Default="yes" Cancel="yes" Text="[ButtonText_Cancel]">
          <Publish Event="SpawnDialog" Value="CancelDlg">1</Publish>
        </Control>
        <Control Id="Bitmap" Type="Bitmap" X="0" Y="0" Width="370" Height="234" TabSkip="no" Text="[DialogBitmap]" />
        <Control Id="ActionText" Type="Text" X="135" Y="100" Width="220" Height="20" Transparent="yes" NoPrefix="yes">
          <Subscribe Event="ActionText" Attribute="Text" />
        </Control>
        <Control Id="Description" Type="Text" X="135" Y="70" Width="220" Height="20" Transparent="yes" NoPrefix="yes">
          <Text>Please wait while the [Wizard] prepares to guide you through the installation.</Text>
        </Control>
        <Control Id="Next" Type="PushButton" X="236" Y="243" Width="56" Height="17" Disabled="yes" TabSkip="yes" Text="[ButtonText_Next]" />
        <Control Id="Back" Type="PushButton" X="180" Y="243" Width="56" Height="17" Disabled="yes" TabSkip="yes" Text="[ButtonText_Back]" />
        <Control Id="BottomLine" Type="Line" X="0" Y="234" Width="370" Height="0" />
        <Control Id="Title" Type="Text" X="135" Y="20" Width="220" Height="60" Transparent="yes" NoPrefix="yes">
          <Text>{\VerdanaBold13}Welcome to the [ProductName] [Wizard]</Text>
        </Control>
        <Control Id="ActionData" Type="Text" X="135" Y="125" Width="220" Height="30" Transparent="yes" NoPrefix="yes">
          <Subscribe Event="ActionData" Attribute="Text" />
        </Control>
      </Dialog>

      <Dialog Id="ProgressDlg" Width="370" Height="270" Title="[ProductName] [Setup]" Modeless="yes">
        <Control Id="Cancel" Type="PushButton" X="304" Y="243" Width="56" Height="17" Default="yes" Cancel="yes" Text="[ButtonText_Cancel]">
          <Publish Event="SpawnDialog" Value="CancelDlg">1</Publish>
        </Control>
        <Control Id="BannerBitmap" Type="Bitmap" X="0" Y="0" Width="370" Height="44" TabSkip="no" Text="[BannerBitmap]" />
        <Control Id="Back" Type="PushButton" X="180" Y="243" Width="56" Height="17" Disabled="yes" Text="[ButtonText_Back]" />
        <Control Id="Next" Type="PushButton" X="236" Y="243" Width="56" Height="17" Disabled="yes" Text="[ButtonText_Next]" />
        <Control Id="ActionText" Type="Text" X="45" Y="145" Width="300" Height="10">
          <Subscribe Event="ActionText" Attribute="Text" />
        </Control>
        <Control Id="Text" Type="Text" X="35" Y="65" Width="300" Height="20">
          <Text>Please wait while the [Wizard] [Progress2] [ProductName]. This may take several minutes.</Text>
        </Control>
        <Control Id="BottomLine" Type="Line" X="0" Y="234" Width="370" Height="0" />
        <Control Id="Title" Type="Text" X="20" Y="15" Width="200" Height="15" Transparent="yes" NoPrefix="yes">
          <Text>[DlgTitleFont][Progress1] [ProductName]</Text>
        </Control>
        <Control Id="ActionData" Type="Text" X="45" Y="160" Width="300" Height="10">
          <Subscribe Event="ActionData" Attribute="Text" />
        </Control>
        <Control Id="BannerLine" Type="Line" X="0" Y="44" Width="370" Height="0" />
        <Control Id="ActionLabel" Type="Text" X="35" Y="130" Width="100" Height="10" Text="Present Action:" />
        <Control Id="ProgressBar" Type="ProgressBar" X="35" Y="115" Width="300" Height="10" Text="fertig">
          <Subscribe Event="SetProgress" Attribute="Progress" />
        </Control>
        <Control Id="StatusLabel" Type="Text" X="35" Y="100" Width="100" Height="10" Text="Status:" />
      </Dialog>

      <Dialog Id="UserExit" Width="370" Height="270" Title="[ProductName] [Setup]" NoMinimize="yes">
        <Control Id="Finish" Type="PushButton" X="236" Y="243" Width="56" Height="17" Default="yes" Cancel="yes" Text="[ButtonText_Finish]">
          <Publish Event="EndDialog" Value="Exit">1</Publish>