at91sam9260_demo_linux_dataflash.tcl

AT91SAM9260 KERNEL2.6.19/BUSYBOX 1.1.3

#  ----------------------------------------------------------------------------
#          ATMEL Microcontroller Software Support  -  ROUSSET  -
#  ----------------------------------------------------------------------------
#  Copyright (c) 2006, Atmel Corporation
#
#  All rights reserved.
#
#  Redistribution and use in source and binary forms, with or without
#  modification, are permitted provided that the following conditions are met:
#
#  - Redistributions of source code must retain the above copyright notice,
#  this list of conditions and the disclaiimer below.
#
#  - Redistributions in binary form must reproduce the above copyright notice,
#  this list of conditions and the disclaimer below in the documentation and/or
#  other materials provided with the distribution. 
#
#  Atmel's name may not be used to endorse or promote products derived from
#  this software without specific prior written permission. 
#
#  DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
#  IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
#  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
#  DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
#  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
#  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
#  OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
#  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
#  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
#  EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#  ----------------------------------------------------------------------------


################################################################################
#  proc uboot_env: Convert u-boot variables in a string ready to be flashed
#                  in the region reserved for environment variables
################################################################################
proc set_uboot_env {nameOfLstOfVar} {
    upvar $nameOfLstOfVar lstOfVar
    
    # sector size is the size defined in u-boot CFG_ENV_SIZE
    set sectorSize [expr 0x4000 - 4]

    set strEnv [join $lstOfVar "\0"]
    while {[string length $strEnv] < $sectorSize} {
        append strEnv "\0"
    }
    set strCrc [binary format i [::vfs::crc $strEnv]]
    return "$strCrc$strEnv"
}


################################################################################
#  Sanity Checks:
#               Checks the mapping regarding the kernel and the disk size
################################################################################
proc is_mapping_correct {} {
    variable df_mapping
    variable bootstrapSize
    variable ubootSize
    variable kernelSize
    variable diskSize
    
    # ### Check the offset in DataFlash ###
    # Check if there is enough space for the bootstrap before uboot environment variables
    if {[expr ($df_mapping(bootstrapOff) + $bootstrapSize)] > $df_mapping(ubootEnvOff)} {
        error "-F- The area for the bootstrap in DataFlash is not large enough $df_mapping(bootstrapSize)"
    }
    # Check if there is enough space for the uboot before Linux Kernel
     if {[expr ($df_mapping(ubootOff) + $ubootSize)] > $df_mapping(kernelOff)} {
         error "-F- The area for the uboot in DataFlash is not large enough $ubootSize"
    }
    # Check if there is enough space for the kernel before the ramdisk
    if {[expr ($df_mapping(kernelOff) + $kernelSize)] > $df_mapping(diskOff)} {
        error "-F- The area for the kernel in DataFlash is not large enough $df_mapping(kernelSize)"
    }
   
    # ### Check the position in sdram ###
    if {[expr ($df_mapping(diskSdram) + $diskSize)] > $df_mapping(kernelSdram)} {
        error "-F- The area for the disk in SDRAM is not large enough $df_mapping(diskSize)"
    }
}

################################################################################
#  Main script: Load the linux demo in DataFlash,
#               Update the environment variables
################################################################################


array set df_mapping {
    bootstrapFileName   "dataflash_at91sam9260ek.bin"
    kernelFileName      "linux-2.6.18-rc4-sam9260.img"
    diskFileName        "armv5l-uclibc-sam9260"
    ubootEnvFileName    "tmp.bin"

    baseAddr        0xD0000000
    bootstrapOff    0x00000000
    ubootOff        0x00008000
    ubootEnvOff     0x00004000
    kernelOff       0x00030000
    diskOff         0x00300000
    
    kernelSdram     0x21500000
    diskSdram       0x21100000
}

set binPath [lindex $::argv 3]
set ubootFileName [lindex $::argv 4]
puts "u-boot file: $ubootFileName"

set bootstrapFile [file join $binPath $df_mapping(bootstrapFileName)]
set ubootFile [file join $binPath $ubootFileName]
set kernelFile [file join $binPath $df_mapping(kernelFileName)]
set diskFile [file join $binPath $df_mapping(diskFileName)]

set bootstrapSize [format "0x%08X" [file size $df_mapping(bootstrapFileName)]]
set ubootSize     [format "0x%08X" [file size $ubootFileName]]
set kernelSize    [format "0x%08X" [file size $df_mapping(kernelFileName)]]
set diskSize      [format "0x%08X" [file size $df_mapping(diskFileName)]]
puts "diskSize: $diskSize"

set kernelAddr [format "0x%08X" [expr $df_mapping(baseAddr) + $df_mapping(kernelOff)]]
set diskAddr [format "0x%08X" [expr $df_mapping(baseAddr) + $df_mapping(diskOff)]]

puts "-I- === Performs sanity checks==="
if { [catch {is_mapping_correct} eid] } {
    puts "$eid"
    exit 1
}

catch {is_mapping_correct} 

lappend u_boot_variables \
    "bootdelay=3" \
    "baudrate=115200" \
    "stdin=serial" \
    "stdout=serial" \
    "stderr=serial" \
    "bootcmd=\
cp.b $kernelAddr $df_mapping(kernelSdram) $kernelSize;\
cp.b $diskAddr $df_mapping(diskSdram) $diskSize;\
bootm $df_mapping(kernelSdram)"

puts "-I- === Initialize the DataFlash access ==="
DATAFLASH::SelectDataflash AT91C_SPI0_CS1

puts "-I- === Erase all the DataFlash blocs and test the erasing ==="
DATAFLASH::EraseAllDataFlash

puts "-I- === Load the bootstrap: dataflash_at91sam9260ek in the first sector ==="
DATAFLASH::SendBootFile $bootstrapFile

puts "-I- === Load the u-boot in the next sectors ==="
send_file {DataFlash AT45DB/DCB} "$ubootFile" $df_mapping(ubootOff) 0 

puts "-I- === Load the u-boot environment variables ==="
set fh [open "$df_mapping(ubootEnvFileName)" w]
fconfigure $fh -translation binary
puts -nonewline $fh [set_uboot_env u_boot_variables]
close $fh
send_file {DataFlash AT45DB/DCB} "$df_mapping(ubootEnvFileName)" $df_mapping(ubootEnvOff) 0 

puts "-I- === Load the Kernel image ==="
send_file {DataFlash AT45DB/DCB} "$df_mapping(kernelFileName)" $df_mapping(kernelOff) 0

puts "-I- === Load the linux file system ==="
send_file {DataFlash AT45DB/DCB} "$df_mapping(diskFileName)" $df_mapping(diskOff) 0