svmcv.m

LibSVM工具箱

function [net, CVErr, paramSeq] = svmcv(net, X, Y, range, step, nfold, Xv, Yv, dodisplay)
% SVMCV - Kernel parameter selection for SVM via cross validation
% 
%   NET = SVMCV(NET, X, Y, RANGE)
%   Given an initialised Support Vector Machine structure NET, the best
%   setting of the kernel parameters is computed via 10fold cross
%   validation. CV is done on the data points X (one point per row) with
%   target values Y (+1 or -1). The kernel parameters that are tested lie
%   between MIN(RANGE) and MAX(RANGE), starting with MIN(RANGE) for 'rbf'
%   kernels and MAX(RANGE) for all other kernel functions.
%   RANGE may also be a vector of length >2, in this case RANGE is taken
%   as the explicit sequence of kernel parameters that are tested.
%   SVMCV only works for kernel functions that require one parameter.
%
%   [NET, CVERR, PARAMSEQ] = SVMCV(NET, X, Y, RANGE, STEP, NFOLD)
%   The sequence of test parameters is generated by Param(t+1) =
%   Param(t)*STEP for 'rbf' kernels, and  Param(t+1) = Param(t)+STEP for
%   all other kernels. Default value: SQRT(2) for 'rbf', -1 otherwise.
%   Determine the parameters based on NFOLD cross validation.
%   If STEP==[], RANGE is again interpreted as the explict sequence of
%   kernel parameters.
%
%   The tested parameter sequence is returned in PARAMSEQ. For each entry
%   PARAMSEQ(i), there is one line CVERR(i,:) that describes the
%   estimated test set error. CVERR(i,1) is the mean,  CVERR(i,2) is the
%   variance of the test set error over all NFOLD runs.
%
%   [NET, CVERR, PARAMSEQ] = SVMCV(NET, X, Y, RANGE, STEP, 1, XV, YV)
%   does parameter selection based on one fixed validation set XV and
%   YV. CVERR(i,2)==0 for all tested parameter settings.
%   NET = SVMCV(NET, X, Y, RANGE, STEP, 1, XV, YV, DODISPLAY) displays
%   error information for all tested parameters. DODISPLAY==0 shows
%   nothing, DODISPLAY==1 shows a final CV summary (default),
%   DODISPLAY==2 also shows the test set error for each trained SVM,
%   DODISPLAY==3 includes the output produced by SVMTRAIN.
%
%   See also
%   SVM, SVMTRAIN
%   

% 
% Copyright (c) by Anton Schwaighofer (2001)
% $Revision: 1.6 $ $Date: 2001/06/05 19:20:00 $
% mailto:[e-mail]
% 
% This program is released unter the GNU General Public License.
% 

% Check arguments for consistency
errstring = consist(net, 'svm', X, Y);
if ~isempty(errstring);
  error(errstring);
end
if nargin<9,
  dodisplay = 1;
end
if nargin<8,
  Xv = [];
end
if nargin<7,
  Yv = [];
end
if nargin<6,
  nfold = 10;
end
if (~isempty(Xv)) & (~isempty(Yv)),
  errstring = consist(net, 'svm', Xv, Yv);
  if ~isempty(errstring);
    error(errstring);
  end
  if (nfold~=1),
    error('Input parameters XV and YV may only be used with NFOLD==1');
  end
end
if nargin<5,
  step = 0;
end

range = range(:)';
N = size(X, 1);
if N<nfold,
  error('At least NFOLD (default 10) training examples must be given');
end

if (length(range)>2) | isempty(step),
  % If range parameter has more than only min/max entries: Use this as
  % the sequence of parameters to test
  paramSeq = range;
else
  paramSeq = [];
  switch net.kernel
    case 'rbf'
      if step==0,
        step = sqrt(2);
      end
    % Multiplicative update, step size < 1 : start with max value
    if abs(step)<1,
      param = max(range);
      while (param>=min(range)),
        paramSeq = [paramSeq param];
        param = param*abs(step);
      end
    else
      % Multiplicative update, step size > 1 : start with min value
      param = min(range);
      while (param<=max(range)),
        paramSeq = [paramSeq param];
        param = param*abs(step);
      end
    end
    otherwise
      % Additive update for kernels other than 'rbf'
      if step==0,
        step = -1;
      end
      if step<0,
        paramSeq = max(range):step:min(range);
      else
        paramSeq = min(range):step:max(range);
      end
  end
end
  

% Storing all validation set errors for each parameter choice
allErr = zeros(nfold, length(paramSeq));
% Storing the confusion matrices for each parameter choice
cm = cell(1, length(paramSeq));
for j = 1:length(paramSeq),
  cm{j} = zeros(2);
end

% shuffle X and Y in the same way
perm = randperm(N);
X = X(perm,:);
Y = Y(perm,:);

% size of one test set
chsize = floor (N/nfold);
% the training set is not exactly the whole data minus the one test set,
% but it is the union of the other test sets. So only effsize examples
% of the data set will ever be used
effsize = nfold*chsize;

% check if leave-one-out CV (or almost such) is required
usePrev = (nfold>=(N/2));
prevInd = [];

for i = 1:nfold,
  % currentX/Y is the current training set
  if (nfold == 1),
    currentX = X;
    currentY = Y;
    testX = Xv;
    testY = Yv;
  else
    % start and end index of current test set
    ind1 = 1+(i-1)*chsize;
    ind2 = i*chsize;
    currentInd = [1:(ind1-1), (ind2+1):effsize];
    currentX = X(currentInd, :);
    currentY = Y(currentInd, :);
    testX = X(ind1:ind2,:);
    testY = Y(ind1:ind2,:);
  end;
  % We start out with the most powerful kernel (smallest sigma for RBF
  % kernel, highest degree for polynomial). We assume that all training
  % examples will be support vectors due to overfitting, thus we start
  % the optimization with a value of C/2 for each example.
  if length(net.c(:))==1,
    alpha0 = repmat(net.c, [length(currentY) 1]);
    % The same upper bound for all examples
  elseif length(net.c(:))==2,
    alpha0 = zeros([length(currentY) 1]);
    alpha0(currentY>0) = net.c(1);
    alpha0(currentY<=0) = net.c(2);
    % Different upper bounds C for the positive and negative examples
  else
    net2.c = net.c(perm);
    alpha0 = net2.c(currentInd);
    % Use different C for each example: permute the original C's
  end
  alpha0 = alpha0/2;
  % Start out with alpha = C/2 for the optimization routine.
  % another little trick for leave-one-out CV: training sets will only
  % slightly differ, thus use the alphas from the previous iteration,
  % even if it resulted from a different parameter setting, as initial
  % values alpha0
  if usePrev & ~isempty(prevInd),
    a = zeros(N, 1);
    a(currentInd) = alpha0;
    a(prevInd) = prevAlpha;
    alpha0 = a(currentInd);
  end
  
  % Now loop over all parameter settings and train the SVM on currentX/Y
  net2 = net;
  if (dodisplay>0),
    fprintf('Split %i of the training data:\n', i);
  end
  for j = 1:length(paramSeq),
    param = paramSeq(j);
    net2.kernelpar = param;
    % Plug the current parameter settings into the SVM and train on the
    % current training set
    net2 = svmtrain(net2, currentX, currentY, alpha0, max(0,dodisplay-2));
    % Evaluate on the non-training data
    testPred = svmfwd(net2, testX);
    allErr(i, j) = mean(testY ~= testPred);
    % Compute the confusion matrix
    for k = [1 2],
      for l = [1 2],
        c(k,l) = sum(((testPred>=0)==(l-1)).*((testY>=0)==(k-1)));
      end
    end
    cm{j} = cm{j}+c;
    % take out the computed coefficients alpha and use them as starting
    % values for the next iteration (next parameter choice)
    alpha0 = net2.alpha;
    if (dodisplay>1),
      fprintf('Split %i with parameter %g:\n', i, param);
      fprintf('  Test set error = %2.3f%%\n', allErr(i, j)*100);
      [fracSV, normW] = svmstat(net2, (dodisplay>2));
      fprintf('  Norm of the separating hyperplane: %g\n', normW);
      fprintf('  Fraction of support vectors: %2.3f%%\n', fracSV*100);
    end
  end
  if usePrev,
    prevAlpha = net2.alpha;
    prevInd = currentInd;
  end
end

% Compute mean and standard deviation over all nfold runs
meanErr = mean(allErr, 1);
stdErr = std(allErr, 0, 1);
CVErr = [meanErr; stdErr]';
% Find the point of minimum mean error and plug that parameter into the
% output SVM structure. If there should be several points of minimal
% error, select the one with minimal standard deviation
[sortedMean, sortedInd] = sort(meanErr);
minima = find(sortedMean(1)==meanErr);
[dummy, sortedInd2] = sort(stdErr(minima));
net.kernelpar = paramSeq(minima(sortedInd2(1)));

if (dodisplay>0),
  for j = 1:length(paramSeq),
    fprintf('kernelpar=%g: Avg CV error %2.3f%% with stddev %1.4f\n', ...
            paramSeq(j), meanErr(j)*100, stdErr(j)*100);
    if any(cm{j}~=0),
      fprintf('  Confusion matrix, averaged over all runs:\n');
      fprintf('                  Predicted class:\n');
      fprintf('               %5i         %5i\n', -1, +1);
      c1 = cm{j}';
      c2 = 100*c1./repmat(sum(c1), [2 1]);
      c3 = [c1(:) c2(:)]';
      fprintf(['  True -1: %5i (%3.2f%%)  %5i (%3.2f%%)\n  True +1: %5i' ...
               ' (%3.2f%%)  %5i (%3.2f%%)\n'], c3(:));
    end
  end
end