iir_chebyshev1_lp.m

自己编写的ChebyshevI型滤波器的源程序.对于毕业设计的同学,很有参考价值.它是ChebyshevI型低通滤波器

% IIR Lowpass Use Chebyshev Type 1
% copyright by Etual

clear;
fs=20;fpass=4;fstop=5;
Ap=0.5;As=10;
wp=2*pi*fpass/fs;ws=2*pi*fstop/fs;
omegap=tan(wp/2);omegas=tan(ws/2);
ep=sqrt(10^(Ap/10)-1);
es=sqrt(10^(As/10)-1);
e=es/ep;w=omegas/omegap;
N=ceil(log(e+sqrt(e^2-1))/log(w+sqrt(w^2-1)));
a=log(1/ep+sqrt(1/ep^2+1))/N;
omega0=omegap*sinh(a);
K=floor(N/2);
theta=zeros(1,K);omega=zeros(1,K);
for i=1:K  
    theta(i)=pi*(N-1+2*i)/(2*N);
end
for i=1:K  
    omega(i)=omegap*sin(theta(i));
end
G=zeros(1,K);a1=zeros(1,K);a2=zeros(1,K);
for i=1:K
    G(i)=(omega0^2+omega(i)^2)/(1-2*omega0*cos(theta(i))+omega0^2+omega(i)^2);
end
for i=1:K
    a1(i)=2*(omega0^2+omega(i)^2-1)/(1-2*omega0*cos(theta(i))+omega0^2+omega(i)^2);
end
for i=1:K
    a2(i)=(1+2*omega0*cos(theta(i))+omega0^2+omega(i)^2)/(1-2*omega0*cos(theta(i))+omega0^2+omega(i)^2);
end
if K<(N/2)
    G0=omega0/(omega0+1);a0=(omega0-1)/(omega0+1);    
else
    H0=sqrt(1/(1+ep^2));
end
f=0:1/300:10;
Hf2=1./(1+ep^2*(cheby(N,tan(pi*f/fs)/omegap)).^2);
plot(f,abs(Hf2));
grid;