usblibrary.h

ATMEL ATSAM7S64处理器部分控制程序。

// The following ifdef block is the standard way of creating macros which make exporting 
// from a DLL simpler. All files within this DLL are compiled with the USBLIBRAIRIE_EXPORTS
// symbol defined on the command line. this symbol should not be defined on any project
// that uses this DLL. This way any other project whose source files include this file see 
// USBLIBRAIRIE_API functions as being imported from a DLL, wheras this DLL sees symbols
// defined with this macro as being exported.
#ifdef USBLIBRARY_EXPORTS
#define USBLIBRARY_API __declspec(dllexport)
#else
#define USBLIBRARY_API __declspec(dllimport)
#endif

//////////////////////////////////////////////////////////////

#include <windows.h>
#include <setupapi.h>
#include <basetyps.h>


class USBLIBRARY_API CFCPipeUSB {

    HANDLE m_hPipeIn;	// Handel of the input file
    HANDLE m_hPipeOut;	// Handel of the output file

  public :
    CFCPipeUSB();		// Constructor

    short Open(char *sDeviceName);	// Open pipe
    short Close();					// Close pipe

    virtual short ReadPipe(LPVOID pBuffer, ULONG ulBufferSize);		// Read data  
    virtual short WritePipe(LPVOID pBuffer, ULONG ulBufferSize, ULONG *pBytesWritten);	// Write data
};

// Get list of connected device
USBLIBRARY_API int GetUsbDeviceListName(char** deviceList[]);

#define	FC_OK	            	        0	//OK

//ERROR
#define FC_ERROR_MASK	              (short)(0x8000) 
#define FC_CODE_MASK	              (short)(0x7fff)

//Critical Errors
#define FC_ERROR	                  (short)(0x8000)    //Internal error
#define FC_DLL_NOT_INITIALIZED	    (short)(0x8001)
#define FC_NOT_OPEN	                (short)(0x8002) //Device not opened
#define	FC_DRIVER_NOT_FOUND	        (short)(0x8004) //driver may not be installed 
#define FC_DEVICE_NOT_CONNECTED     (short)(0x8008) //Device may be  not connected
#define FC_DRIVER_ERROR	            (short)(0x8010) //Error during driver  acquisition
                                                //or device not plugged
#define FC_BUSY	                    (short)(0x8020) //device busy
#define FC_NOT_ENOUGH_MEMORY	      (short)(0x8040) //can't allocate memory
#define FC_NOT_INITIALIZED	        (short)(0x8080) //parameter not initialized
#define	FC_NO_SLICE_MEMORY	        (short)(0x8100) //no slice memory
#define	FC_NO_IMAGE_MEMORY	        (short)(0x8200) //no image memory

#define FC_SYNCHRO_LOST	            (short)(0x9001) //synchro bytes lost
#define FC_WRONG_SIZE_SLICE	        (short)(0x9002) //wrong slice size 
#ifdef WIN32
#define FC_WRONG_IMAGE_WIDTH	      (short)(0x9004)
#endif

#define FC_NO_BANDWIDTH	            (short)(0xA001) //No bandwidth allocated for usb driver

#define FC_OPERATION_ABORTED        (short)(0xC000) //Operation was aborted

//Not Critical Errors
#define FC_BAD_FINGER	              (short)(0xD001) //finger not swept fine
#define FC_IMAGE_TOO_BIG	          (short)(0xD002) //image buffer too big
#define	FC_IMAGE_TOO_SMALL	        (short)(0xD004) //image is too small
#define FC_HEIGHT_TOO_LITTLE	      (short)(0xD008) //Image height to little
#define FC_TOO_SLOW	                (short)(0xD010) //sweeping was too slow
#define FC_TOO_FAST	                (short)(0xD020) //sweeping was too fast
#define FC_NOT_ENOUGH_GOOD_SLICE    (short)(0xD040)//not enough good slices
#define FC_TIME_OUT	                (short)(0xD080) //timeOut
#define FC_NOT_SUPPORTED            (short)(0xD100) //Parameter or function not 
                                          //supported by the current device

//WARNING
#define FC_DIRECTORY_MISSING	      (short)(0x0001) //directory is missing
#define FC_UNABLE_OPEN_FILE	        (short)(0x0002) //can't open the file
#define FC_UNCONSISTENT_SLICE	      (short)(0x0004) //Slices are not consistent
#define FC_NO_THERMAL	              (short)(0x0008) //Chip warming does not work
#define FC_THRESHOLD_HIGH	          (short)(0x0010) //Finger detection threshold to high
#define FC_HALF_BANDWIDTH	          (short)(0x0020) //only half bandwidth allocated for usb driver
#define FC_TEMPERATURE_NOT_UPTODATE	(short)(0x0040) //Temperature is not uptodate
#define FC_TOO_WARM                 (short)(0x0080) //Temperature too high to warm 
#define FC_TOO_COLD                 (short)(0x0090) //Temperature too low to warm
#define FC_SLOW	                    (short)(0x0900) //Sweeping was a bit slow
#define	FC_IMAGE_TRUNCATED	        (short)(0x0300) //reconstructed image was truncated
#define FC_NO_FINGER	              (short)(0x2000) //No finger detected
#define FC_TRUNCATED_MESSAGE	      (short)(0x4000) //Error message was truncated