📄 cstartup_angel.s
字号:
#------------------------------------------------------------------------------
#- ATMEL Microcontroller Software Support - ROUSSET -
#------------------------------------------------------------------------------
# The software is delivered "AS IS" without warranty or condition of any
# kind, either express, implied or statutory. This includes without
# limitation any warranty or condition with respect to merchantability or
# fitness for any particular purpose, or against the infringements of
# intellectual property rights of others.
#-----------------------------------------------------------------------------
#- File source : cstartup_angel.s
#- Object : Specific Startup for Angel compatibility to must be
#- loaded in SRAM. And support the Semihosting
#- Compilation flag : SEMIHOSTING => use the semihosting facilities
#-
#- 1.0 06/04/00 JPP : Creation
#- 1.1 18/08/00 JCZ : Over-comment and optimize
#- 1.2 25/10/00 JPP : Global for including
#------------------------------------------------------------------------------
#------------------------------------------------------------------------------
#- Area Definition
#-----------------
#- Must be defined as function to put first in the code as it must be mapped
#- at SRAM.
#------------------------------------------------------------------------------
# AREA reset, CODE, READONLY, INTERWORK
#------------------------------------------------------------------------------
#- Semihosting support
#--------------------------------
#- The C runtime library is the IO functions provided by the semihosting.
#- They are generally costly in code and can be used as the debugger
#------------------------------------------------------------------------------
#- Define "__main" to ensure that C runtime system is not linked
.global __main
__main:
#------------------------------------------------------------------------------
#- Define the entry point
#------------------------
#------------------------------------------------------------------------------
# ENTRY
__entry:
#------------------------------------------------------------------------------
#- Exception vectors ( Remap is managed by Angel )
#------------------------------------------------------------------------------
B InitReset /* reset */
#------------------------------------------------------------------------------
#- EBI Initialization Data
#-------------------------
#- The EBI User Interface Image which is copied by the boot.
#- The EBI_CSR_x are defined in the target and hardware depend.
#- That's hardware! Details in the Electrical Datasheet of the AT91 device.
#- EBI Base Address is added at the end for commodity in copy code.
#------------------------------------------------------------------------------
InitTableEBI:
.long EBI_CSR_0
.long EBI_CSR_1
.long EBI_CSR_2
.long EBI_CSR_3
.long EBI_CSR_4
.long EBI_CSR_5
.long EBI_CSR_6
.long EBI_CSR_7
.long 0x00000001 /* REMAP command */
.long 0x00000006 /* 6 memory regions, standard read */
PtEBIBase:
.long EBI_BASE /* EBI Base Address */
#------------------------------------------------------------------------------
#- The reset handler before Remap
#--------------------------------
#- From here, the code is executed from SRAM address
#------------------------------------------------------------------------------
InitReset:
#----------------------------------------------------------------------
# Call __low_level_init to perform initialization before initializing
# AIC and calling main.
#----------------------------------------------------------------------
bl __low_level_init
#------------------------------------------------------------------------------
#- Initialise the Memory Controller
#----------------------------------
#- The IniTableEBI addressing must be relative .
#- The PtInitRemap must be absolute as the processor jumps at this address
#- Note also that the EBI base address is loaded in r11 by the "ldmia".
#------------------------------------------------------------------------------
#- Copy the Image of the Memory Controller
sub r10, pc,#(8+.-InitTableEBI) /* get the address of the chip select register image */
#- Copy Chip Select Register Image to Memory Controller and command remap
ldmia r10!, {r0-r9,r11} /* load the complete image and the EBI base */
stmia r11!, {r0-r9} /* store the complete image with the remap command */
#------------------------------------------------------------------------------
#- Stack Sizes Definition
#------------------------
#- Interrupt Stack requires 3 words x 8 priority level x 4 bytes when using
#- the vectoring. This assume that the IRQ_ENTRY/IRQ_EXIT macro are used.
#- The Interrupt Stack must be adjusted depending on the interrupt handlers.
#- Fast Interrupt is the same than Interrupt without priority level.
#- Other stacks are defined by default to save one word each.
#- The System stack size is not defined and is limited by the free internal
#- SRAM.
#- User stack size is not defined and is limited by the free external SRAM.
#------------------------------------------------------------------------------
.equ IRQ_STACK_SIZE, (3*8*4) /* 3 words per interrupt priority level */
.equ FIQ_STACK_SIZE, (3*4) /* 3 words */
.equ ABT_STACK_SIZE, (1*4) /* 1 word */
.equ UND_STACK_SIZE, (1*4) /* 1 word */
#------------------------------------------------------------------------------
#- Top of Stack Definition
#-------------------------
#- Fast Interrupt, Interrupt, Abort, Undefined and Supervisor Stack are located
#- at the top of internal memory in order to speed the exception handling
#- context saving and restoring.
#- User (Application, C) Stack is located at the top of the external memory.
#------------------------------------------------------------------------------
.equ TOP_EXCEPTION_STACK, RAM_LIMIT /* Defined in part */
.equ TOP_APPLICATION_STACK, EXT_SRAM_LIMIT /* Defined in Target */
#------------------------------------------------------------------------------
#- Setup the stack for each mode
#-------------------------------
ldr r0, =TOP_EXCEPTION_STACK
#- Set up Fast Interrupt Mode and set FIQ Mode Stack
msr CPSR_c, #ARM_MODE_FIQ | I_BIT | F_BIT
mov r13, r0 /* Init stack FIQ */
sub r0, r0, #FIQ_STACK_SIZE
#- Set up Interrupt Mode and set IRQ Mode Stack
msr CPSR_c, #ARM_MODE_IRQ | I_BIT | F_BIT
mov r13, r0 /* Init stack IRQ */
sub r0, r0, #IRQ_STACK_SIZE
#- Set up Abort Mode and set Abort Mode Stack
msr CPSR_c, #ARM_MODE_ABORT | I_BIT | F_BIT
mov r13, r0 /* Init stack Abort */
sub r0, r0, #ABT_STACK_SIZE
#- Set up Undefined Instruction Mode and set Undef Mode Stack
msr CPSR_c, #ARM_MODE_UNDEF | I_BIT | F_BIT
mov r13, r0 /* Init stack Undef */
sub r0, r0, #UND_STACK_SIZE
#- Set up Supervisor Mode and set Supervisor Mode Stack
msr CPSR_c, #ARM_MODE_SVC | I_BIT | F_BIT
mov r13, r0 /* Init stack Sup */
#------------------------------------------------------------------------------
#- Setup Application Operating Mode and Enable the interrupts
#------------------------------------------------------------
#- System Mode is selected first and the stack is setup. This allows to prevent
#- any interrupt occurence while the User is not initialized. System Mode is
#- used as the interrupt enabling would be avoided from User Mode (CPSR cannot
#- be written while the core is in User Mode).
#------------------------------------------------------------------------------
msr CPSR_c, #ARM_MODE_USER /* set User mode */
ldr r13, =TOP_APPLICATION_STACK /* Init stack User */
#------------------------------------------------------------------------------
#- Initialise C variables
#------------------------
#- Following labels are automatically generated by the linker.
#- RO: Read-only = the code
#- RW: Read Write = the data pre-initialized and zero-initialized.
#- ZI: Zero-Initialized.
#- Pre-initialization values are located after the code area in the image.
#- Zero-initialized datas are mapped after the pre-initialized.
#- Note on the Data position :
#- If using the ARMSDT, when no -rw-base option is used for the linker, the
#- data area is mapped after the code. You can map the data either in internal
#- SRAM ( -rw-base=0x40 or 0x34) or in external SRAM ( -rw-base=0x2000000 ).
#- Note also that to improve the code density, the pre_initialized data must
#- be limited to a minimum.
#------------------------------------------------------------------------------
.extern Image_RO_Limit /* End of ROM code (=start of ROM data) */
.extern Image_RW_Base /* Base of RAM to initialise */
.extern Image_ZI_Base /* Base and limit of area */
.extern Image_ZI_Limit /* to zero initialise */
ldr r0, =Image_RO_Limit /* Get pointer to ROM data */
ldr r1, =Image_RW_Base /* and RAM copy */
ldr r3, =Image_ZI_Base /* Zero init base => top of initialised data */
cmp r0, r1 /* Check that they are different */
beq NoRW
LoopRw: cmp r1, r3 /* Copy init data */
ldrcc r2, [r0], #4
strcc r2, [r1], #4
bcc LoopRw
NoRW: ldr r1, =Image_ZI_Limit /* Top of zero init segment */
mov r2, #0
LoopZI: cmp r3, r1 /* Zero init */
strcc r2, [r3], #4
bcc LoopZI
.IFDEF SEMIHOSTING
#;- Branch on Entry point
#;- ---------------------
#;- Allows semihosting initialisation
#;- you must be set the semihosting debugger for ARM SDT :$top_of_memory = 0x
#;- for Aspex :top_memory = 0x in bcd board description
.extern __entry
.equ SEMIHOSTING_STACK_SIZE, (8*1024)
ldr r0, = SEMIHOSTING_STACK_SIZE
sub r13, r13,r0
b __entry
.ELSE /* not use SEMIHOSTING */
#------------------------------------------------------------------------------
#- Branch on C code Main function (with interworking)
#----------------------------------------------------
#- Branch must be performed by an interworking call as either an ARM or Thumb
#- main C function must be supported. This makes the code not position-
#- independant. A Branch with link would generate errors
#------------------------------------------------------------------------------
.extern main
ldr r0, =main
mov lr, pc
bx r0
.ENDIF /* endif SEMIHOSTING */
#------------------------------------------------------------------------------
#- Loop for ever
#---------------
#- End of application. Normally, never occur.
#- Could jump on Software Reset ( B 0x0 ).
#------------------------------------------------------------------------------
End:
b End
.global __gccmain
__gccmain:
mov pc, lr
# END
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -