edma.c

使用在dsp TI DSK6711中 很多ｃｏｎｔｒｏｌｌｅｒ 的例子

/*
 *  Copyright 2003 by Texas Instruments Incorporated.
 *  All rights reserved. Property of Texas Instruments Incorporated.
 *  Restricted rights to use, duplicate or disclose this code are
 *  granted through contract.
 *
 *  @(#) XDAS 2.51.00 11-29-2003 (xdas-2.50.00.9)
 */
/*
 *  ======== edma.c ========
 */

#include <std.h>

#include <dss.h>
#include <edma.h>

#include "c6211dsk.h"


/*
 *  ======== EDMA_init ========
 *  Initialise EDMA Controller
 */
Void EDMA_init(Void)
{
    /* General EDMA Initialisation */
    *(volatile Uns *) EER = 0x0000;     /* Disable all events */
    *(volatile Uns *) ECR = 0xffff;     /* Clear all pending events */
    *(volatile Uns *) CIER = 0x0000;    /* Disable all events to Interrupt */
    *(volatile Uns *) CIPR = 0xffff;    /* Clear all pending Queued EDMA ints */

    /*----------------------------------------------------------------------*/
    /* Initialise EDMA for Transfer from McBSP_0 on Receipt of New Sample   */
    *(volatile Uns *) EDMA_EVENTD_OPT   = 0x28710000;   // TCC = 1 for Receive
    *(volatile Uns *) EDMA_EVENTD_SRC   = McBSP0_DRR;   // Source = McBSP Rcv  
    *(volatile Uns *) EDMA_EVENTD_CNT   = 0x0;          // Count = not known yet
    *(volatile Uns *) EDMA_EVENTD_DST   = 0x0;          // Dst = not known yet
    *(volatile Uns *) EDMA_EVENTD_IDX   = 4;    // 4 byte offset (load low 16)
    *(volatile Uns *) EDMA_EVENTD_LNK   = 0;    // No auto reload parameters

    /*----------------------------------------------------------------------*/
    /* Initialise EDMA for Transfer Samples back to McBSP_0 when TXer Ready */
    *(volatile Uns *) EDMA_EVENTC_OPT   = 0x4B120000;   // TCC = 2 for Transmit
    *(volatile Uns *) EDMA_EVENTC_SRC   = 0x0;          // Src = not known yet
    *(volatile Uns *) EDMA_EVENTC_CNT   = 0x0;          // Cnt = not known yet
    *(volatile Uns *) EDMA_EVENTC_DST   = McBSP0_DXR;   // Dst = McBSP Transmit
    *(volatile Uns *) EDMA_EVENTC_IDX   = 4;    // 4 byte offset (load low 16)
    *(volatile Uns *) EDMA_EVENTC_LNK   = 0;    // No auto reload parameters
    
    /*----------------------------------------------------------------------*/
    /* Enable Events and Interrupts                                     */
    *(volatile Uns *) CIER = 0x0006;    /* Enable Rx/Tx Complete Interrupts */
}

/*
 *  ======= EDMA_rxStart ========
 */
Void EDMA_rxStart(Void *dst, Int nwords)
{
    /* Reconfig EDMA channel for next receive buffer */
    *(volatile Uns *) EDMA_EVENTD_CNT   = (Uns) DSS_rxCnt;
    *(volatile Uns *) EDMA_EVENTD_DST   = (Uns) DSS_rxPtr;

    *(volatile Uns *) EER = 0x3000;     /* Enable McBSP0 Rx/Tx Events */
    *(volatile Uns *) ESR = 0x2000;     /* Force Rx Event Start */
}

/*
 *  ======= EDMA_txStart ========
 */
Void EDMA_txStart(Void *src, Int nwords)
{
    /* Reconfig EDMA channel for next transmit buffer */
    *(volatile Uns *) EDMA_EVENTC_SRC   = (Uns) DSS_txPtr;
    *(volatile Uns *) EDMA_EVENTC_CNT   = (Uns) DSS_txCnt;

    *(volatile Uns *) EER = 0x3000;     /* Enable McBSP0 Rx/Tx Events */
    *(volatile Uns *) ESR = 0x1000;     /* Force Tx Event Start */
}