ssi2_fat.c

用Dynamic C写的http程序

/*******************************************************************************
        Samples\TcpIp\HTTP\ssi2_fat.c
        Z-World, 2000

        This is the same as ssi2.c, except that the FAT filesystem is used
        to contain the web pages and images.

   NOTE:
        Before running this sample, you must run samples\tcpip\zserver\fat_setup.c
        That sample copies the necessary files to the FAT filesystem (you only
        have to run it once).

*******************************************************************************/
#class auto

/***********************************
 * Configuration                   *
 * -------------                   *
 * All fields in this section must *
 * be altered to match your local  *
 * network settings.               *
 ***********************************/


// Necessary for zserver.
#define FAT_USE_FORWARDSLASH

/*
 *  This value is required to enable FAT blocking mode for ZServer.lib
 */
#define FAT_BLOCK



#use "sflash_fat.lib"
#use "fat.lib"


/*
 * Pick the predefined TCP/IP configuration for this sample.  See
 * LIB\TCPIP\TCP_CONFIG.LIB for instructions on how to set the
 * configuration.
 */
#define TCPCONFIG 1


/*
 * TCP/IP modification - reduce TCP socket buffer
 * size, to allow more connections. This can be increased,
 * with increased performance, if the number of sockets
 * are reduced.  Note that this buffer size is split in
 * two for TCP sockets--1024 bytes for send and 1024 bytes
 * for receive.
 */
#define TCP_BUF_SIZE 2048

/*
 * Web server configuration
 */

/*
 * Only one server is needed for a reserved port
 */
#define HTTP_MAXSERVERS 1
#define MAX_TCP_SOCKET_BUFFERS 1

/*
 * Our web server as seen from the clients.
 * This should be the address that the clients (netscape/IE)
 * use to access your server. Usually, this is your IP address.
 * If you are behind a firewall, though, it might be a port on
 * the proxy, that will be forwarded to the Rabbit board. The
 * commented out line is an example of such a situation.
 */
#define REDIRECTHOST		_PRIMARY_STATIC_IP
//#define REDIRECTHOST	"proxy.domain.com:1212"


/********************************
 * End of configuration section *
 ********************************/

#memmap xmem
#use "dcrtcp.lib"
#use "http.lib"

/*
 *  REDIRECTTO is used by each ledxtoggle cgi's to tell the
 *  browser which page to hit next.  The default REDIRECTTO
 *  assumes that you are serving a page that does not have
 *  any address translation applied to it.
 *
 */

#define REDIRECTTO 		"http://" REDIRECTHOST "/A/ssi2.ssi"


// Import the source code for this sample.
#ximport "samples/tcpip/http/ssi2_fat.c"          ssi_c

/*
 *  In this case the .html is not the first type in the
 *  type table.  This causes the default (no extension)
 *  to assume the shtml_handler.
 *
 */

// This table maps file extensions to the appropriate "MIME" type.  This is
// needed for the HTTP server.
SSPEC_MIMETABLE_START
	SSPEC_MIME_FUNC(".ssi", "text/html", shtml_handler),
	SSPEC_MIME(".htm", "text/html"),
	SSPEC_MIME(".cgi", ""),
	SSPEC_MIME(".gif", "image/gif"),
SSPEC_MIMETABLE_END

/*
 *  Each ledx contains a text string that is either
 *  "/A/ledon.gif" or "/A/ledoff.gif"  This string is toggled
 *  each time the ledxtoggle.cgi is requested from the
 *  browser.
 *
 */

char led1[15];
char led2[15];
char led3[15];
char led4[15];

#define LEDON "/A/ledon.gif"
#define LEDOFF "/A/ledoff.gif"

/*
 * The audit list - stores the last NUM_ENTRIES changes to the site
 */
#define NUM_ENTRIES	16
typedef struct {
	longword address;	/* who made the change */
	char which;		/* which LED changed */
	char led1;		/* updated status of all LEDs */
	char led2;
	char led3;
	char led4;
} AUDITLine;
AUDITLine audit_list[NUM_ENTRIES];
int current_line;

char get_led_status(char *led)
{
  	return !strcmp(led,LEDON);
}

void AuditInitLine(AUDITLine* line)
{
	line->address = 0;
	line->led1 = get_led_status(led1);
	line->led2 = get_led_status(led2);
	line->led3 = get_led_status(led3);
	line->led4 = get_led_status(led4);
}

void AuditInit(void)
{
	auto int i;
	for(i=0;i<NUM_ENTRIES;i++) {
		AuditInitLine(&audit_list[i]);
	}
	current_line = 0;
}

/**
 * 	print the audit list.  Call by SSI exec command in "SSI2.shtml"
 * 	(ie, it holds the static areas of the HTML page).
 */
int audit_list_print(HttpState* state)
{
	auto int printline;
	auto AUDITLine* p;

	if(state->substate >= NUM_ENTRIES)
		return 1;

	printline = current_line - state->substate;
	if(printline < 0)
		printline += NUM_ENTRIES;


	p = &audit_list[printline];

	if(0 == p->address) {
		state->substate++;
		return 0;
	}

	sprintf(state->buffer, "<tr><td>%02X</td><td>led%d</td><td>%c%c%c%c</td></tr>\r\n",
		((byte)(p->address)) ^ ((byte)(p->address >> 8)),
		p->which,
		1 == p->led1 ? 'O' : 'X',
		1 == p->led2 ? 'O' : 'X',
		1 == p->led3 ? 'O' : 'X',
		1 == p->led4 ? 'O' : 'X'
		);
	state->headerlen = strlen(state->buffer);
	state->headeroff = 0;
	state->substate++;

	return 0;
}

void add_audit(HttpState* state, char which)
{
	struct sockaddr sock_addr;

	current_line++;
	if(current_line >= NUM_ENTRIES)
		current_line = 0;

	AuditInitLine(&audit_list[current_line]);

	if(0 == getpeername((sock_type*)&state->s, &sock_addr, NULL)) {
		audit_list[current_line].address = sock_addr.s_ip;
	} else {
		audit_list[current_line].address = 1;
	}

	audit_list[current_line].which = which;
}

/*
 *  Instead of sending other text back from the cgi's
 *  we have decided to redirect them to the original page.
 *  the cgi_redirectto forms a header which will redirect
 *  the browswer back to the main page.
 *
 */

int led1toggle(HttpState* state)
{
   if (strcmp(led1,LEDON)==0)
      strcpy(led1,LEDOFF);
   else
      strcpy(led1,LEDON);

   add_audit(state, 1);

   cgi_redirectto(state,REDIRECTTO);
   return 0;
}

int led2toggle(HttpState* state)
{
   if (strcmp(led2,LEDON)==0)
      strcpy(led2,LEDOFF);
   else
      strcpy(led2,LEDON);

   add_audit(state, 2);


   cgi_redirectto(state,REDIRECTTO);
   return 0;
}

int led3toggle(HttpState* state)
{
   if (strcmp(led3,LEDON)==0)
      strcpy(led3,LEDOFF);
   else
      strcpy(led3,LEDON);

   add_audit(state, 3);

   cgi_redirectto(state,REDIRECTTO);
   return 0;
}

int led4toggle(HttpState* state)
{
   if (strcmp(led4,LEDON)==0)
      strcpy(led4,LEDOFF);
   else
      strcpy(led4,LEDON);

   add_audit(state, 4);

   cgi_redirectto(state,REDIRECTTO);
   return 0;
}

SSPEC_RESOURCETABLE_START
	SSPEC_RESOURCE_XMEMFILE("/ssi.c", ssi_c),
	SSPEC_RESOURCE_ROOTVAR("led1", led1, PTR16, "%s"),
	SSPEC_RESOURCE_ROOTVAR("led2", led2, PTR16, "%s"),
	SSPEC_RESOURCE_ROOTVAR("led3", led3, PTR16, "%s"),
	SSPEC_RESOURCE_ROOTVAR("led4", led4, PTR16, "%s"),
	SSPEC_RESOURCE_FUNCTION("/led1tog.cgi", led1toggle),
	SSPEC_RESOURCE_FUNCTION("/led2tog.cgi", led2toggle),
	SSPEC_RESOURCE_FUNCTION("/led3tog.cgi", led3toggle),
	SSPEC_RESOURCE_FUNCTION("/led4tog.cgi", led4toggle),
	SSPEC_RESOURCE_FUNCTION("/audit", audit_list_print)
SSPEC_RESOURCETABLE_END


void main()
{
	int rc;
   char buf[20];

	printf("Initializing filesystem...\n");
	// Note: sspec_automount automatically initializes all known filesystems.
   rc = sspec_automount(SSPEC_MOUNT_ANY, NULL, NULL, NULL);
   if (rc)
   	printf("Failed to initialize, rc=%d\nProceeding anyway...\n", rc);

   strcpy(led1,LEDON);
   strcpy(led2,LEDON);
   strcpy(led3,LEDOFF);
   strcpy(led4,LEDON);

   /* Init the audit history */
   AuditInit();

   sock_init();
   http_init();
	tcp_reserveport(80);
   http_set_path("/", "A/ssi2.ssi");	// Set default resource name

   printf("Now try connecting via your web browser.\n");
   printf("Try a URL of http://%s/\n", inet_ntoa(buf, MY_ADDR(IF_DEFAULT)));

   while (1) {
      http_handler();
   }
}