i2c_irq.arm

ARM入门的好帮手.包含了从简单到相对较复杂的程序.

;------------------------------------------------------------------------------
;-	  ATMEL Microcontroller Software Support  -   ROUSSET -
;------------------------------------------------------------------------------
;- File source				: i2c_irq.s
;- Librarian				: Not applicable
;-
;- Treatment				: Assembler Timer Counter Interrupt Handler.
;-
;- 1.0 
;- 1.1 02/11/00 JPP     		: Green Hills	
;------------------------------------------------------------------------------
; Function :
; The handlers for each Timer Counter are stored in the table <TCHandlerTable>.
; When an interrupt occurs, the core branchs the channel corresponding
; assembler handler which manage the system ( core and AIC ) and branch to
; the corresponding C handler. This last can be defined by the C function
; <init_timer_irq>.
; Note in thumb mode, handler addresses are saved with bit 0 set. Then,
; you don't need to set it before execution of bx.
;------------------------------------------------------------------------------
			AREA    AT91Lib, CODE, READONLY, INTERWORK


            INCLUDE     ../../periph/aic/aic.inc
            INCLUDE     ../../periph/arm7tdmi/arm.inc

   	    EXPORT	tc0_interrupt_handler
	    IMPORT	I2C_line
	    IMPORT	I2C_lineHandlerInt


tc0_interrupt_handler
			
;- Adjust and save LR_irq in IRQ stack
            sub         r14, r14, #4
            stmfd       sp!, {r14}

;- Write in the IVR to support Protect Mode
;- No effect in Normal Mode
;- De-assert the NIRQ and clear the source in Protect Mode
            ldr         r14, =AIC_BASE
            str         r14, [r14, #AIC_IVR]

;- Save SPSR and r0 in IRQ stack
            mrs         r14, SPSR
            stmfd       sp!, {r0, r14}

;- Enable Interrupt and Switch in SYS Mode
            mrs         r0, CPSR
            bic         r0, r0, #I_BIT
            orr         r0, r0, #ARM_MODE_SYS
            msr         CPSR_c, r0

;- Save scratch/used registers and LR in User Stack
            stmfd       sp!, { r1-r3, r12, r14}
            	

			ldr 			r0,=I2C_line
;- Load the address of the Timer Counter Handler Table
			ldr			r1, =I2C_lineHandlerInt

			mov			r14, pc
			bx			r1
;- Restore scratch/used registers and LR from User Stack
            ldmia       sp!, { r1-r3, r12, r14}
            
;- Disable Interrupt and switch back in IRQ mode
            mrs         r0, CPSR
            bic         r0, r0, #ARM_MODE_SYS
            orr         r0, r0, #I_BIT:OR:ARM_MODE_IRQ
            msr         CPSR_c, r0

;- Mark the End of Interrupt on the AIC
            ldr         r0, =AIC_BASE
            str         r0, [r0, #AIC_EOICR]

;- Restore SPSR_irq and r0 from IRQ stack
            ldmia       sp!, {r0, r14}
            msr         SPSR_cxsf, r14

;- Restore adjusted  LR_irq from IRQ stack directly in the PC
            ldmia       sp!, {pc}^


			END


END