at91r40008_inc.h

ARM入门的好帮手.包含了从简单到相对较复杂的程序.

#define 	AT91C_TC_ACPA_CLEAR                (0x2 << 16) // (TC) Effect: clear
#define 	AT91C_TC_ACPA_TOGGLE               (0x3 << 16) // (TC) Effect: toggle
#define AT91C_TC_ACPC             (0x3 << 18) // (TC) RC Compare Effect on TIOA
#define 	AT91C_TC_ACPC_NONE                 (0x0 << 18) // (TC) Effect: none
#define 	AT91C_TC_ACPC_SET                  (0x1 << 18) // (TC) Effect: set
#define 	AT91C_TC_ACPC_CLEAR                (0x2 << 18) // (TC) Effect: clear
#define 	AT91C_TC_ACPC_TOGGLE               (0x3 << 18) // (TC) Effect: toggle
#define AT91C_TC_AEEVT            (0x3 << 20) // (TC) External Event Effect on TIOA
#define 	AT91C_TC_AEEVT_NONE                 (0x0 << 20) // (TC) Effect: none
#define 	AT91C_TC_AEEVT_SET                  (0x1 << 20) // (TC) Effect: set
#define 	AT91C_TC_AEEVT_CLEAR                (0x2 << 20) // (TC) Effect: clear
#define 	AT91C_TC_AEEVT_TOGGLE               (0x3 << 20) // (TC) Effect: toggle
#define AT91C_TC_ASWTRG           (0x3 << 22) // (TC) Software Trigger Effect on TIOA
#define 	AT91C_TC_ASWTRG_NONE                 (0x0 << 22) // (TC) Effect: none
#define 	AT91C_TC_ASWTRG_SET                  (0x1 << 22) // (TC) Effect: set
#define 	AT91C_TC_ASWTRG_CLEAR                (0x2 << 22) // (TC) Effect: clear
#define 	AT91C_TC_ASWTRG_TOGGLE               (0x3 << 22) // (TC) Effect: toggle
#define AT91C_TC_BCPB             (0x3 << 24) // (TC) RB Compare Effect on TIOB
#define 	AT91C_TC_BCPB_NONE                 (0x0 << 24) // (TC) Effect: none
#define 	AT91C_TC_BCPB_SET                  (0x1 << 24) // (TC) Effect: set
#define 	AT91C_TC_BCPB_CLEAR                (0x2 << 24) // (TC) Effect: clear
#define 	AT91C_TC_BCPB_TOGGLE               (0x3 << 24) // (TC) Effect: toggle
#define AT91C_TC_BCPC             (0x3 << 26) // (TC) RC Compare Effect on TIOB
#define 	AT91C_TC_BCPC_NONE                 (0x0 << 26) // (TC) Effect: none
#define 	AT91C_TC_BCPC_SET                  (0x1 << 26) // (TC) Effect: set
#define 	AT91C_TC_BCPC_CLEAR                (0x2 << 26) // (TC) Effect: clear
#define 	AT91C_TC_BCPC_TOGGLE               (0x3 << 26) // (TC) Effect: toggle
#define AT91C_TC_BEEVT            (0x3 << 28) // (TC) External Event Effect on TIOB
#define 	AT91C_TC_BEEVT_NONE                 (0x0 << 28) // (TC) Effect: none
#define 	AT91C_TC_BEEVT_SET                  (0x1 << 28) // (TC) Effect: set
#define 	AT91C_TC_BEEVT_CLEAR                (0x2 << 28) // (TC) Effect: clear
#define 	AT91C_TC_BEEVT_TOGGLE               (0x3 << 28) // (TC) Effect: toggle
#define AT91C_TC_BSWTRG           (0x3 << 30) // (TC) Software Trigger Effect on TIOB
#define 	AT91C_TC_BSWTRG_NONE                 (0x0 << 30) // (TC) Effect: none
#define 	AT91C_TC_BSWTRG_SET                  (0x1 << 30) // (TC) Effect: set
#define 	AT91C_TC_BSWTRG_CLEAR                (0x2 << 30) // (TC) Effect: clear
#define 	AT91C_TC_BSWTRG_TOGGLE               (0x3 << 30) // (TC) Effect: toggle
// -------- TC_SR : (TC Offset: 0x20) TC Channel Status Register -------- 
#define AT91C_TC_COVFS            (0x1 <<  0) // (TC) Counter Overflow
#define AT91C_TC_LOVRS            (0x1 <<  1) // (TC) Load Overrun
#define AT91C_TC_CPAS             (0x1 <<  2) // (TC) RA Compare
#define AT91C_TC_CPBS             (0x1 <<  3) // (TC) RB Compare
#define AT91C_TC_CPCS             (0x1 <<  4) // (TC) RC Compare
#define AT91C_TC_LDRAS            (0x1 <<  5) // (TC) RA Loading
#define AT91C_TC_LDRBS            (0x1 <<  6) // (TC) RB Loading
#define AT91C_TC_ETRCS            (0x1 <<  7) // (TC) External Trigger
#define AT91C_TC_ETRGS            (0x1 << 16) // (TC) Clock Enabling
#define AT91C_TC_MTIOA            (0x1 << 17) // (TC) TIOA Mirror
#define AT91C_TC_MTIOB            (0x1 << 18) // (TC) TIOA Mirror
// -------- TC_IER : (TC Offset: 0x24) TC Channel Interrupt Enable Register -------- 
// -------- TC_IDR : (TC Offset: 0x28) TC Channel Interrupt Disable Register -------- 
// -------- TC_IMR : (TC Offset: 0x2c) TC Channel Interrupt Mask Register -------- 

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR Timer Counter Interface
// *****************************************************************************
// *** Register offset in AT91S_TCB structure ***
#define TCB_TC0         ( 0) // TC Channel 0
#define TCB_TC1         (64) // TC Channel 1
#define TCB_TC2         (128) // TC Channel 2
#define TCB_BCR         (192) // TC Block Control Register
#define TCB_BMR         (196) // TC Block Mode Register
// -------- TCB_BCR : (TCB Offset: 0xc0) TC Block Control Register -------- 
#define AT91C_TCB_SYNC            (0x1 <<  0) // (TCB) Synchro Command
// -------- TCB_BMR : (TCB Offset: 0xc4) TC Block Mode Register -------- 
#define AT91C_TCB_TC0XC0S         (0x1 <<  0) // (TCB) External Clock Signal 0 Selection
#define 	AT91C_TCB_TC0XC0S_TCLK0                (0x0) // (TCB) TCLK0 connected to XC0
#define 	AT91C_TCB_TC0XC0S_NONE                 (0x1) // (TCB) None signal connected to XC0
#define 	AT91C_TCB_TC0XC0S_TIOA1                (0x2) // (TCB) TIOA1 connected to XC0
#define 	AT91C_TCB_TC0XC0S_TIOA2                (0x3) // (TCB) TIOA2 connected to XC0
#define AT91C_TCB_TC1XC1S         (0x1 <<  2) // (TCB) External Clock Signal 1 Selection
#define 	AT91C_TCB_TC1XC1S_TCLK1                (0x0 <<  2) // (TCB) TCLK1 connected to XC1
#define 	AT91C_TCB_TC1XC1S_NONE                 (0x1 <<  2) // (TCB) None signal connected to XC1
#define 	AT91C_TCB_TC1XC1S_TIOA0                (0x2 <<  2) // (TCB) TIOA0 connected to XC1
#define 	AT91C_TCB_TC1XC1S_TIOA2                (0x3 <<  2) // (TCB) TIOA2 connected to XC1
#define AT91C_TCB_TC2XC2S         (0x1 <<  4) // (TCB) External Clock Signal 2 Selection
#define 	AT91C_TCB_TC2XC2S_TCLK2                (0x0 <<  4) // (TCB) TCLK2 connected to XC2
#define 	AT91C_TCB_TC2XC2S_NONE                 (0x1 <<  4) // (TCB) None signal connected to XC2
#define 	AT91C_TCB_TC2XC2S_TIOA0                (0x2 <<  4) // (TCB) TIOA0 connected to XC2
#define 	AT91C_TCB_TC2XC2S_TIOA2                (0x3 <<  4) // (TCB) TIOA2 connected to XC2

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR Peripheral Data Controller
// *****************************************************************************
// *** Register offset in AT91S_PDC structure ***
#define PDC_RPR         ( 0) // Receive Pointer Register
#define PDC_RCR         ( 4) // Receive Counter Register
#define PDC_TPR         ( 8) // Transmit Pointer Register
#define PDC_TCR         (12) // Transmit Counter Register

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR Usart
// *****************************************************************************
// *** Register offset in AT91S_USART structure ***
#define US_CR           ( 0) // Control Register
#define US_MR           ( 4) // Mode Register
#define US_IER          ( 8) // Interrupt Enable Register
#define US_IDR          (12) // Interrupt Disable Register
#define US_IMR          (16) // Interrupt Mask Register
#define US_CSR          (20) // Channel Status Register
#define US_RHR          (24) // Receiver Holding Register
#define US_THR          (28) // Transmitter Holding Register
#define US_BRGR         (32) // Baud Rate Generator Register
#define US_RTOR         (36) // Receiver Time-out Register
#define US_TTGR         (40) // Transmitter Time-guard Register
#define US_RPR          (48) // Receive Pointer Register
#define US_RCR          (52) // Receive Counter Register
#define US_TPR          (56) // Transmit Pointer Register
#define US_TCR          (60) // Transmit Counter Register
// -------- US_CR : (USART Offset: 0x0) Debug Unit Control Register -------- 
#define AT91C_US_RSTRX            (0x1 <<  2) // (USART) Reset Receiver
#define AT91C_US_RSTTX            (0x1 <<  3) // (USART) Reset Transmitter
#define AT91C_US_RXEN             (0x1 <<  4) // (USART) Receiver Enable
#define AT91C_US_RXDIS            (0x1 <<  5) // (USART) Receiver Disable
#define AT91C_US_TXEN             (0x1 <<  6) // (USART) Transmitter Enable
#define AT91C_US_TXDIS            (0x1 <<  7) // (USART) Transmitter Disable
#define AT91C_US_RSTSTA           (0x1 <<  8) // (USART) Reset Status Bits
#define AT91C_US_STTBRK           (0x1 <<  9) // (USART) Start Break
#define AT91C_US_STPBRK           (0x1 << 10) // (USART) Stop Break
#define AT91C_US_STTTO            (0x1 << 11) // (USART) Start Time-out
#define AT91C_US_SENDA            (0x1 << 12) // (USART) Send Address
// -------- US_MR : (USART Offset: 0x4) Debug Unit Mode Register -------- 
#define AT91C_US_CLKS             (0x3 <<  4) // (USART) Clock Selection (Baud Rate generator Input Clock
#define 	AT91C_US_CLKS_CLOCK                (0x0 <<  4) // (USART) Clock
#define 	AT91C_US_CLKS_FDIV1                (0x1 <<  4) // (USART) fdiv1
#define 	AT91C_US_CLKS_SLOW                 (0x2 <<  4) // (USART) slow_clock (ARM)
#define 	AT91C_US_CLKS_EXT                  (0x3 <<  4) // (USART) External (SCK)
#define AT91C_US_CHRL             (0x3 <<  6) // (USART) Clock Selection (Baud Rate generator Input Clock
#define 	AT91C_US_CHRL_5_BITS               (0x0 <<  6) // (USART) Character Length: 5 bits
#define 	AT91C_US_CHRL_6_BITS               (0x1 <<  6) // (USART) Character Length: 6 bits
#define 	AT91C_US_CHRL_7_BITS               (0x2 <<  6) // (USART) Character Length: 7 bits
#define 	AT91C_US_CHRL_8_BITS               (0x3 <<  6) // (USART) Character Length: 8 bits
#define AT91C_US_SYNC             (0x1 <<  8) // (USART) Synchronous Mode Select
#define AT91C_US_PAR              (0x7 <<  9) // (USART) Parity type
#define 	AT91C_US_PAR_EVEN                 (0x0 <<  9) // (USART) Even Parity
#define 	AT91C_US_PAR_ODD                  (0x1 <<  9) // (USART) Odd Parity
#define 	AT91C_US_PAR_SPACE                (0x2 <<  9) // (USART) Parity forced to 0 (Space)
#define 	AT91C_US_PAR_MARK                 (0x3 <<  9) // (USART) Parity forced to 1 (Mark)
#define 	AT91C_US_PAR_NONE                 (0x4 <<  9) // (USART) No Parity
#define 	AT91C_US_PAR_MULTI_DROP           (0x6 <<  9) // (USART) Multi-drop mode
#define AT91C_US_NBSTOP           (0x3 << 12) // (USART) Number of Stop bits
#define 	AT91C_US_NBSTOP_1_BIT                (0x0 << 12) // (USART) 1 stop bit
#define 	AT91C_US_NBSTOP_15_BIT               (0x1 << 12) // (USART) Asynchronous (SYNC=0) 2 stop bits Synchronous (SYNC=1) 2 stop bits
#define 	AT91C_US_NBSTOP_2_BIT                (0x2 << 12) // (USART) 2 stop bits
#define AT91C_US_CHMODE           (0x3 << 14) // (USART) Channel Mode
#define 	AT91C_US_CHMODE_NORMAL               (0x0 << 14) // (USART) Normal Mode: The USART channel operates as an RX/TX USART.
#define 	AT91C_US_CHMODE_AUTO                 (0x1 << 14) // (USART) Automatic Echo: Receiver Data Input is connected to the TXD pin.
#define 	AT91C_US_CHMODE_LOCAL                (0x2 << 14) // (USART) Local Loopback: Transmitter Output Signal is connected to Receiver Input Signal.
#define 	AT91C_US_CHMODE_REMOTE               (0x3 << 14) // (USART) Remote Loopback: RXD pin is internally connected to TXD pin.
#define AT91C_US_MODE9            (0x1 << 17) // (USART) 9-bit Character length
#define AT91C_US_CKLO             (0x1 << 18) // (USART) Clock Output Select
// -------- US_IER : (USART Offset: 0x8) Debug Unit Interrupt Enable Register -------- 
#define AT91C_US_RXRDY            (0x1 <<  0) // (USART) RXRDY Interrupt
#define AT91C_US_TXRDY            (0x1 <<  1) // (USART) TXRDY Interrupt
#define AT91C_US_RXBRK            (0x1 <<  2) // (USART) Break Received/End of Break
#define AT91C_US_ENDRX            (0x1 <<  3) // (USART) End of Receive Transfer Interrupt
#define AT91C_US_ENDTX            (0x1 <<  4) // (USART) End of Transmit Interrupt
#define AT91C_US_OVRE             (0x1 <<  5) // (USART) Overrun Interrupt
#define AT91C_US_FRAME            (0x1 <<  6) // (USART) Framing Error Interrupt
#define AT91C_US_PARE             (0x1 <<  7) // (USART) Parity Error Interrupt
#define AT91C_US_TIMEOUT          (0x1 <<  8) // (USART) Receiver Time-out
#define AT91C_US_TXEMPTY          (0x1 <<  9) // (USART) TXEMPTY Interrupt
// -------- US_IDR : (USART Offset: 0xc) Debug Unit Interrupt Disable Register -------- 
// -------- US_IMR : (USART Offset: 0x10) Debug Unit Interrupt Mask Register -------- 
// -------- US_CSR : (USART Offset: 0x14) Debug Unit Channel Status Register -------- 

// *****************************************************************************