flash.dat

ARM入门的好帮手.包含了从简单到相对较复杂的程序.

Com *--------------------------------------------------------------------------------------
Com *     ATMEL Microcontroller Software Support  -  ROUSSET  -
Com *--------------------------------------------------------------------------------------
Com *The software is delivered "AS IS" without warranty or condition of any
Com *kind, either express, implied or statutory. This includes without
Com *limitation any warranty or condition with respect to merchantability or
Com *fitness for any particular purpose, or against the infringements of
Com *intellectual property rights of others.
Com *--------------------------------------------------------------------------------------
Com *File Name               : File interrupt__lash.dat
Com *Object                  : cript file for axd debugger
Com *
Com *1.0 18/Feb/03   JPP     : Creation
Com *--------------------------------------------------------------------------------------

Com Enable the semihosting. If you don't use printf and/or scanf functions, set semihosting_enabled to 0.
spp semihosting_enabled 0

Com Setup EBI to support all connected memories
Com Setup for EB40A with external Flash memory only. Change the EBI value (i.e number of wait states, TDF, 8 or 16-bit memory, etc..
Com according to your external memories and peripherals.
Com You can add other EBI Chip Select setting to fit your board configuration.
Com EBI_CS0 for Flash access

Com Disable all vector catch to not have AXD to warn you that a vector exception has been caught.
spp vector_catch 0x0


Com EBI_CS0 connected to the flash memory.
Com Settings : EBI_BA=0x01000000 / EBI_CSEN / EBI_BAT_BYTE_WRITE / EBI_TDF_2 / EBI_PAGES_16M / EBI_NWS_7 / EBI_DBW_16

setmem 0xFFE00000 0x01002539 32


Com Load file
ld interrupt.axf

Com Clear All break
cbr all