systffs.c

VxWorks BSP 下s3C44b0的源代码

/* sysTffs.c - Motorola MVME177 system-dependent TrueFFS library */


/* Copyright 1984-1997 Wind River Systems, Inc. */
#include "copyright_wrs.h"

/* FAT-FTL Lite Software Development Kit
 * Copyright (C) M-Systems Ltd. 1995-1996	*/

/*
modification history
--------------------
01o,29jul04,a_m  BSP定制 for 多刃剑开发板
01j,31may99,yp  Added comments suggested in SPR #25319
01i,21apr98,yp   added tffs to files included from there
01h,11mar98,yp   made including tffsConfig.c conditional so man page
                 generation does not include it.
01g,09mar99,kbw  made man page edits to fix problems found by QE
01f,02jan98,yp   doc cleanup 
01e,18dec97,hdn  added comment.  cleaned up.
01d,05dec97,hdn  added tffsSocket[].  cleaned up.
01c,11nov97,hdn  fixed typo.
01b,05nov97,hdn  cleaned up.
01a,09oct97,and  written by Andray in M-Systems
*/

/*
DESCRIPTION
This library provides board-specific hardware access routines for TrueFFS.  
In effect, these routines comprise the socket component driver (or drivers)
for your flash device hardware.  At socket registration time, TrueFFS stores 
pointers to the functions of this socket component driver in an 'FLSocket' 
structure.  When TrueFFS needs to access the flash device, it uses these 
functions.  

Because this file is, for the most part, a device driver that exports its 
functionality by registering function pointers with TrueFFS, very few of the 
functions defined here are externally callable.  For the record, these 
external functions are flFitInSocketWindow() and flDelayLoop().  You should 
never have any need to call these functions.  

However, one of the most import functions defined in this file is neither
referenced in an 'FLSocket' structure, nor is it externally callable.  This
function is sysTffsInit().  TrueFFS calls this function at initialization 
time to register socket component drivers for all the flash devices attached 
to your target.  It is this call to sysTffs() that results in assigning 
drive numbers to the flash devices on your target hardware.  Drive numbers 
are assigned by the order in which the socket component drivers are registered.
The first to be registered is drive 0, the second is drive 1, and so on up to 
4.  As shipped, TrueFFS supports up to five flash drives.  

After registering socket component drivers for a flash device, you may 
format the flash medium even though there is not yet a block device driver
associated with the flash (see the reference entry for the tffsDevCreate() 
routine).  To format the flash medium for use with TrueFFS, 
call tffsDevFormat() or, for some BSPs, sysTffsFormat().  

The sysTffsFormat() routine is an optional but BSP-specific externally 
callable helper function.  Internally, it calls tffsDevFormat() with a 
pointer to a 'FormatParams' structure initialized to values that leave a 
space on the flash device for a boot image. This space is outside the 
region managed by TrueFFS.  This special region is necessary for boot 
images because the normal translation and wear-leveling services of TrueFFS 
are incompatible with the needs of the boot program and the boot image it 
relies upon.  To write a boot image (or any other data) into this area, 
use tffsBootImagePut().  

Finally, this file also contains define statements for symbolic constants 
that determine which MTDs, translation layer modules, and other utilities 
are ultimately included in TrueFFS.  These defines are as follows:

.IP "INCLUDE_TL_NFTL"
To include the NAND-based translation layer module.
.IP "INCLUDE_TL_FTL"
To include the NOR-based translation layer module.
.IP "INCLUDE_TL_SSFDC"
To include the SSFDC-appropriate translation layer module.
.IP "INCLUDE_MTD_I28F016"
For Intel 28f016 flash devices.
.IP "INCLUDE_MTD_I28F008"
For Intel 28f008 flash devices.
.IP "INCLUDE_MTD_I28F008_BAJA"
For Intel 28f008 flash devices on the Heurikon Baja 4700.
.IP "INCLUDE_MTD_AMD"
For AMD, Fujitsu: 29F0{40,80,16} 8-bit flash devices.
.IP "INCLUDE_MTD_CDSN"
For Toshiba, Samsung: NAND CDSN flash devices.
.IP "INCLUDE_MTD_DOC2"
For Toshiba, Samsung: NAND DOC flash devices.
.IP "INCLUDE_MTD_CFISCS"
For CFI/SCS flash devices.
.IP "INCLUDE_MTD_WAMD"
For AMD, Fujitsu 29F0{40,80,16} 16-bit flash devices.
.IP "INCLUDE_TFFS_BOOT_IMAGE"
To include tffsBootImagePut() in TrueFFS for Tornado.
.LP
To exclude any of the modules mentioned above, edit sysTffs.c and undefine
its associated symbolic constant.

INCLUDE FILES: flsocket.h, tffsDrv.h

SEE ALSO : tffsDrv tffsConfig
*/

#include "vxWorks.h"
#include "config.h"
#include "tffs/flsocket.h"
#include "tffs/tffsDrv.h"


/* defines */

#define INCLUDE_MTD_SST39VF160	/*  : sst39vf160 */
#undef	INCLUDE_MTD_I28F016		/* Intel: 28f016 */
#undef	INCLUDE_MTD_I28F008		/* Intel: 28f008 */
#undef	INCLUDE_MTD_AMD			/* AMD, Fujitsu: 29f0{40,80,16} 8bit */
#undef	INCLUDE_MTD_CDSN		/* Toshiba, Samsung: NAND, CDSN */
#undef	INCLUDE_MTD_DOC2		/* Toshiba, Samsung: NAND, DOC */
#undef	INCLUDE_MTD_CFISCS		/* CFI/SCS */
#undef	INCLUDE_MTD_WAMD		/* AMD, Fujitsu: 29f0{40,80,16} 16bit */
#undef	INCLUDE_TL_NFTL			/* NFTL translation layer */
#define	INCLUDE_TL_FTL			/* FTL translation layer */
#undef	INCLUDE_TL_SSFDC		/* SSFDC translation layer */
#undef  INCLUDE_TFFS_BOOT_IMAGE		/* include tffsBootImagePut() */
#define	FLASH_BASE_ADRS		ROM_SIZE
#define	FLASH_SIZE		(0x00200000-ROM_SIZE)


/* locals */


/* forward declarations */

LOCAL void		rfaWriteProtect (void);
LOCAL void		rfaWriteEnable (void);
LOCAL FLBoolean		rfaCardDetected (FLSocket vol);
LOCAL void		rfaVccOn (FLSocket vol);
LOCAL void		rfaVccOff (FLSocket vol);
#ifdef	SOCKET_12_VOLTS
LOCAL FLStatus		rfaVppOn (FLSocket vol);
LOCAL void		rfaVppOff (FLSocket vol);
#endif	/* SOCKET_12_VOLTS */
LOCAL FLBoolean		rfaGetAndClearCardChangeIndicator (FLSocket vol);
LOCAL FLBoolean		rfaWriteProtected (FLSocket vol);
LOCAL void		rfaSetWindow (FLSocket vol);
LOCAL void		rfaSetMappingContext (FLSocket vol, unsigned page);
LOCAL FLStatus		rfaSocketInit (FLSocket vol);
LOCAL FLStatus		rfaRegister (void);

#ifndef DOC
#include "tffsConfig.c"
#endif /* DOC */

/*******************************************************************************
*
* sysTffsInit - board-level initialization for TrueFFS
*
* This routine calls the socket registration routines for the socket component
* drivers that will be used with this BSP. The order of registration determines
* the logical drive number given to the drive associated with the socket.
*
* RETURNS: N/A
*/

LOCAL void sysTffsInit (void)
    {

    rfaRegister ();
    }

/*******************************************************************************
*
* rfaRegister - registration routine for the RFA on MVME177
*
* This routine populates the 'vol' structure for a logical drive with the
* socket component driver routines for the RFA on the MVME177 board. All
* socket routines are referanced through the 'vol' structure and never 
* from here directly
*
* RETURNS: flOK, or flTooManyComponents if there're too many drives
*/

LOCAL FLStatus rfaRegister (void)
    {
    FLSocket vol = flSocketOf (noOfDrives);

    if (noOfDrives >= DRIVES)
        return (flTooManyComponents);

    tffsSocket[noOfDrives] = "RFA";
    noOfDrives++;

    vol.serialNo = 0;
    vol.window.baseAddress = FLASH_BASE_ADRS >> 12;

    /* fill in function pointers */

    vol.cardDetected      = rfaCardDetected;
    vol.VccOn             = rfaVccOn;
    vol.VccOff            = rfaVccOff;
#ifdef SOCKET_12_VOLTS
    vol.VppOn             = rfaVppOn;
    vol.VppOff            = rfaVppOff;
#endif
    vol.initSocket        = rfaSocketInit;
    vol.setWindow         = rfaSetWindow;
    vol.setMappingContext = rfaSetMappingContext;
    vol.getAndClearCardChangeIndicator =
                          rfaGetAndClearCardChangeIndicator;
    vol.writeProtected    = rfaWriteProtected;

    return (flOK);
    }

/*******************************************************************************
*
* rfaCardDetected - detect if a card is present (inserted)
*
* This routine detects if a card is present (inserted).
*
* RETURNS: TRUE, or FALSE if the card is not present.
*/

LOCAL FLBoolean rfaCardDetected
    (
    FLSocket vol
    )
    {
    return (TRUE);
    }

/*******************************************************************************
*
* rfaVccOn - turn on Vcc (3.3/5 Volts)
*
* This routine turns on Vcc (3.3/5 Volts).  Vcc must be known to be good
* on exit.
*
* RETURNS: N/A
*/

LOCAL void rfaVccOn 
    (
    FLSocket vol
    )
    {
    rfaWriteEnable ();
    }

/*******************************************************************************
*
* rfaVccOff - turn off Vcc (3.3/5 Volts)
*
* This routine turns off Vcc (3.3/5 Volts). 
*
* RETURNS: N/A
*/

LOCAL void rfaVccOff 
    (
    FLSocket vol
    )
    {
    rfaWriteProtect ();
    }

#ifdef SOCKET_12_VOLTS

/*******************************************************************************
*
* rfaVppOn - turns on Vpp (12 Volts)
*
* This routine turns on Vpp (12 Volts). Vpp must be known to be good on exit.