readme.install

3c90x网卡的驱动（Linux环境下的）

File: README.INSTALL

                          	3Com (R) Corporation
             EtherLink 10/100 PCI (3C90x) Network Interface Card  
    Precompiled 3C90x Driver for Linux Modules Installation Instructions


This file describes how to install the precompiled 3C90x network interface 
card (NIC) driver for Linux on the following configurations and 
distributions:

    RedHat 5.2
      Kernel version 2.0.36
	  
    RedHat 6.0
      Kernel version 2.2.5-15
      Kernel version 2.2.5-22
	  
	  
IMPORTANT:  Before you run the installer, read the README file
included with the driver.  The README file contains important 
information about the 3C90x driver for Linux.
                  
                  
Installing the Driver
---------------------
    1.  Make sure that you have read the README file.

    2.  Become root.
        You need to be root to run the installer.  To be root, use 
        the su command (without %, which indicates the shell prompt):
     
        % su
        
    3.  Run the installer by issuing the following command (note the
        root shell prompt of #):
    
        # ./install3c90x
        
        If the file is not executable, change the file permissions 
        to make it executable:
        
        # chmod +x install3c90x
        
        The installation script places the 3c90x driver module 
        into the appropriate directory under /lib/modules.
        
    4.  Configure the driver.
        See "Configuring the Driver" in the README file.
    


3Com is a registered trademark of 3Com Corporation.


               (README.install - Installation Instructions v1.1)