project.prm

来自「MC13213接受AD采集信号并发送到串口进行接受的程序」· PRM 代码 · 共 28 行

/* This is a linker parameter file for the GB60 */

NAMES END /* CodeWarrior will pass all the needed files to the linker by command line. But here you may add your own files too. */

SEGMENTS /* Here all RAM/ROM areas of the device are listed. Used in PLACEMENT below. */
    ROM                      =  READ_ONLY    0x182C TO 0xFFAF;
    Z_RAM                    =  READ_WRITE   0x0080 TO 0x00FF;
    RAM                      =  READ_WRITE   0x0100 TO 0x107F;
    ROM1                     =  READ_ONLY    0x1080 TO 0x17FF;
    ROM2                     =  READ_ONLY    0xFFC0 TO 0xFFCB;
  //OSVECTORS                =  READ_ONLY    0xFFCC TO 0xFFFF;  /* OSEK interrupt vectors (use your vector.o) */  
END

PLACEMENT /* Here all predefined and user segments are placed into the SEGMENTS defined above. */
  //.ostext,                                             /* OSEK */
    DEFAULT_RAM                         INTO  RAM;
    DEFAULT_ROM, ROM_VAR, STRINGS       INTO  ROM;       /* ROM1,ROM2 In case you want to use ROM1,ROM2 as well, be sure the option -OnB=b is passed to the compiler. */
    _DATA_ZEROPAGE, MY_ZEROPAGE         INTO  Z_RAM;
  //VECTORS_DATA                        INTO  OSVECTORS; /* OSEK */
END

ENTRIES /* keep the following unreferenced variables */
//_vectab OsBuildNumber /* OSEK */
END

STACKSIZE 0x50

VECTOR 0 _Startup /* Reset vector: this is the default entry point for an application. */