ambakbd.c

s2410测试程序,源码,用来深入了解三星2410芯片

    return (status);
    }

/*******************************************************************************
*
* kbdWriteData - write data to device
*
* This routine the write function from the I/O subsystem.
*
* RETURNS: 
*/

LOCAL int kbdWriteData 
    (
    KBD_DEVICE *    pKbdDv    /* device to control */
    )
    {

        return (0);
    }


/*******************************************************************************
*
* kbdHwInit - initialize the Keyboard
* 
* This routine is called to do the keyboard initialization from an external
* routine
*
* RETURNS: N/A
*
* NOMANUAL
*/


LOCAL void kbdHwInit (void)
    {

    UCHAR reply;
    int  timeout = 3;
    kbdWdid = wdCreate ();

    /* disable everything */
    KBD_OUT (COMMAND_AMBA_KB, 0);

    do 
        {
        /* Clock divisor */
        KBD_OUT (KEYB_CLK, KMI_DIVISOR);
        
        /* Enable keyboard but not interrupts */
        KBD_OUT (COMMAND_AMBA_KB, KMI_CR_KMIEN);

        KBD_OUT (DATA_AMBA_KB, 0xFF);
        if (ambaKBRead(&reply) != OK)
            continue;
        if (reply != 0xfa && reply != 0xaa)
            continue;
        if (ambaKBRead(&reply) != OK)
            continue;
        if (reply != 0xfa && reply != 0xaa)
            continue;

        /* mode 1 produces XT scan codes */
        KBD_OUT (DATA_AMBA_KB, 0xF0);
        if (ambaKBRead(&reply) != OK)
            continue;
        KBD_OUT (DATA_AMBA_KB, 0x01);
        if (ambaKBRead(&reply) != OK)
            continue;

        /* enable */
        KBD_OUT (DATA_AMBA_KB, 0xF4);
        if (ambaKBRead(&reply) != OK)
            continue;

        /* repeat rate */
        KBD_OUT (DATA_AMBA_KB, 0xf3);
        if (ambaKBRead(&reply) != OK)
            continue;
        /* .25 sec delay, 30/sec */
        KBD_OUT (DATA_AMBA_KB, 0x00);
        if (ambaKBRead(&reply) != OK)
            continue;
        
        /* Enable interrupts */
        KBD_OUT (COMMAND_AMBA_KB, KMI_CR_RXIEN | KMI_CR_KMIEN);

        break;

        } while (timeout--);

    kbdStatInit ();

    } 

/*******************************************************************************
*
* kbdStatInit - initialize the Keyboard state
*
* This routine initializes the keyboard descriptor in the virtual consoles.
* The same keyboard descriptor is used for all the virtual consoles.
*
* RETURNS: N/A
*/


LOCAL void kbdStatInit (void)
    {
    UCHAR   stat, reply;
    int     timeout = 3;
    
    pKbdDevice->kbdFlags = NUM; /* Numeric mode on */

    stat = (UCHAR) (pKbdDevice->kbdFlags & 0x07);

    if (oldLedStat == stat)
        return;
    oldLedStat = stat;

    do 
        {

        if (ambaKBWrite (0xed) == ERROR)
            continue;
        if (ambaKBRead(&reply) == ERROR)
            continue;

        if (ambaKBWrite (stat) == ERROR)
            continue;
        if (ambaKBRead(&reply) == ERROR)
            continue;

        break;

        } while (--timeout);
    }

/*******************************************************************************
*
* kbdIntr - interrupt level processing
*
* This routine handles the keyboard interrupts
*
* RETURNS: N/A
*
* NOMANUAL
*/

LOCAL void kbdIntr (void)
    {
    FAST UCHAR  scanCode;   /* to hold the scanCode */
    UCHAR stat = KBD_IN (STATUS_AMBA_KB); 

    kbdIntCnt++;
    
    if (stat & KMI_RXFULL)
        {
        int par, temp, n;

        temp = scanCode = KBD_IN (DATA_AMBA_KB);

        /* check parity */
        par = (KBD_IN (STATUS_AMBA_KB) & KMI_PARITY) ? 1 : 0;
        for (n = 8; n > 0; n--)
            {
            par ^= (temp & 0x01);
            temp = temp >> 1;
            }
        if (!par)
            {
            /* parity failed - request retransmission */
            if (!(KBD_IN (STATUS_AMBA_KB) & KMI_TXBUSY))
                {
                /* send a retransmit command if we can */
                KBD_OUT (DATA_AMBA_KB, 0xFE);
                }
            return;
            }

        /* keyboard acknowledge to any valid input, so just return */
        if (scanCode == 0xfa) 
            {
            kbdAcknowledge = TRUE;
            return;
            }
        tyIRd (&(pKbdDevice->tyDev), scanCode);
        }
    }


/******************************************************************************
*
* kbdLedSet - Keybord LED Set
*
* This routine Keyboad LED control on kbdConDv.kbdFlags numeric, caps and
* stps
*
* RETURNS: N/A
*/

LOCAL void kbdLedSet (void)
    {
    UCHAR   stat = 0;
    int     timeout;
    UCHAR   reply;

    /* bits 0 1 2 for scroll numlock & capslock */
    stat = (UCHAR) (pKbdDevice->kbdFlags & 0x07);

    if (oldLedStat == stat)
        return;
    oldLedStat = stat;

    timeout = 3;

    do
        {

        kbdDelay();

        kbdIntDisable();

        ambaKBWrite(0xed);       /* SET LEDS command */
        if (ambaKBRead(&reply) != OK)
            continue;

        ambaKBWrite(stat);       /* set LEDs */
        if (ambaKBRead(&reply) == OK)
            break;

        } while (--timeout >= 0);
        
        kbdIntEnable();

    }

/******************************************************************************
*
* ambaKBRead - read data from the keyboard.
*
* Read data from the keyboard.
*
* RETURNS: OK or ERROR if timed out
*/

STATUS ambaKBRead
    (
    UCHAR *pData
    )
    {

    kbdTimeout = FALSE;
    wdStart (kbdWdid, (sysClkRateGet() * kbdWdsec), (FUNCPTR)kbdWdog, 0);

    while (((KBD_IN (STATUS_AMBA_KB) & KMI_RXFULL) == 0) && !kbdTimeout)
        ;

    wdCancel (kbdWdid);

    kbdDelay();

    *pData = KBD_IN (DATA_AMBA_KB);

    return (kbdTimeout ? ERROR : OK);
    }

/******************************************************************************
*
* ambaKBWrite - write data to the keyboard.
*
* Write data to the keyboard.
*
* RETURNS: OK or ERROR if timed out
*/

STATUS ambaKBWrite
    (
    UCHAR data
    )
    {

    kbdTimeout = FALSE;

    wdStart (kbdWdid, (sysClkRateGet() * kbdWdsec), (FUNCPTR)kbdWdog, 0);

    while ((KBD_IN (STATUS_AMBA_KB) & KMI_TXBUSY) && !kbdTimeout)
        ;

    wdCancel (kbdWdid);

    KBD_OUT (DATA_AMBA_KB, data);

    return (kbdTimeout ? ERROR : OK);
    }

/******************************************************************************
*
* ambaKBCommand - write command to the keyboard.
*
* Write command to the keyboard.
*
* RETURNS: OK or ERROR if timed out
*/

STATUS ambaKBCommand
    (
    UCHAR command
    )
    {

    KBD_OUT (COMMAND_AMBA_KB, command);

    return (OK);
    }

/******************************************************************************
*
* kbdWdog - KBD driver watchdog handler.
*
* KBD driver watchdog handler.
*
* RETURNS: N/A
*/

LOCAL void kbdWdog
    (
    void
    )
    {
    kbdTimeout = TRUE;
    kbdTimeoutCnt++;
    }

/*******************************************************************************
*
* kbdDelay - pause
* 
* This routine is called to introduce some delay
*
* RETURNS: N/A
*
* NOMANUAL
*/
LOCAL void kbdDelay(void)
    {
        taskDelay (sysClkRateGet () >> 3);
    }

/*******************************************************************************
*
* kbdIntDisable - disable keyboard interrupts 
* 
* This routine disables interrupts from being generated by the keyboard controller
*
* RETURNS: N/A
*
* NOMANUAL
*/
LOCAL void kbdIntDisable (void)
    {

    /* Disable interrupts */
    KBD_OUT (COMMAND_AMBA_KB, KMI_CR_KMIEN);

    }

/*******************************************************************************
*
* kbdIntEable - enable keyboard interrupts 
* 
* This routine re-enables Rx interrupts to be generated by the keyboard controller
*
* RETURNS: N/A
*
* NOMANUAL
*/
LOCAL void kbdIntEnable (void)
    {
    
    /* Enable interrupts */
    KBD_OUT (COMMAND_AMBA_KB, KMI_CR_RXIEN | KMI_CR_KMIEN);
    
    }

#endif /* COMMAND_AMBA_KB */