xlli_bulverde_defs.inc

pxa270的bootloader,linux下的,好不容易搞到的

@*********************************************************************************
@
@        COPYRIGHT (c) 2002 Intel Corporation
@
@   The information in this file is furnished for informational use only,
@   is subject to change without notice, and should not be construed as
@   a commitment by Intel Corporation. Intel Corporation assumes no
@   responsibility or liability for any errors or inaccuracies that may appear
@   in this document or any software that may be provided in association with
@   this document.
@
@*********************************************************************************
@
@  FILENAME:       xlli_Bulverde_defs.inc (Core processor address definitions)
@
@ LAST MODIFIED:   14-Oct-2003
@
@******************************************************************************
@
@
@ Include file for Bulverde Processor based
@ Cross Platform Low Level Initialization  (XLLI)
@

@
@ GENERAL PURPOSE I/O (GPIO) base address and register offsets from the base address
@

	 .equ 	xlli_GPIOREGS_PHYSICAL_BASE,0x40E00000

@ GPIO register offsets from the base address

    .equ    xlli_GPLR0_offset,(0x000)  @ GPIO Level registers
    .equ    xlli_GPLR1_offset,(0x004)
    .equ    xlli_GPLR2_offset,(0x008)
    .equ    xlli_GPLR3_offset,(0x100)

    .equ    xlli_GPDR0_offset,(0x00C)  @ GPIO Direction registers
    .equ    xlli_GPDR1_offset,(0x010)
    .equ    xlli_GPDR2_offset,(0x014)
    .equ    xlli_GPDR3_offset,(0x10C)

    .equ    xlli_GPSR0_offset,(0x018)  @ GPIO Set registers
    .equ    xlli_GPSR1_offset,(0x01C)
    .equ    xlli_GPSR2_offset,(0x020)
    .equ    xlli_GPSR3_offset,(0x118)

    .equ    xlli_GPCR0_offset,(0x024)  @ GPIO Clear registers
    .equ    xlli_GPCR1_offset,(0x028)
    .equ    xlli_GPCR2_offset,(0x02C)
    .equ    xlli_GPCR3_offset,(0x124)

  .equ    xlli_GAFR0_L_offset,(0x054)  @ GPIO Alternate function registers (Bits 15:0)
  .equ    xlli_GAFR0_U_offset,(0x058)  @ Bits 31:16
  .equ    xlli_GAFR1_L_offset,(0x05c)  @ Bits 47:32
  .equ    xlli_GAFR1_U_offset,(0x060)  @ Bits 63:48
  .equ    xlli_GAFR2_L_offset,(0x064)  @ Bits 79:64
  .equ    xlli_GAFR2_U_offset,(0x068)  @ Bits 95:80
  .equ    xlli_GAFR3_L_offset,(0x06C)  @ Bits 111:96
  .equ    xlli_GAFR3_U_offset,(0x070)  @ Bits 127:112

@
@ POWER MANAGER base address and register offsets from the base address
@

	 .equ 	xlli_PMRCREGS_PHYSICAL_BASE,0x40F00000 

	 .equ 	xlli_PMCR_offset,(0x00)      @ Power Manager Control Register
	 .equ 	xlli_PSSR_offset,(0x04)      @ Power Manager Sleep Status Register
	 .equ 	xlli_PSPR_offset,(0x08)      @ Power Manager Scratch Pad Register
	 .equ 	xlli_PWER_offset,(0x0C)      @ Power Manager Wake-up Enable Register
	 .equ 	xlli_PRER_offset,(0x10)      @ Power Manager GPIO Rising-edge Detect Enable Register
	 .equ 	xlli_PFER_offset,(0x14)      @ Power Manager GPIO Falling-edge Detect Enable Register
	 .equ 	xlli_PEDR_offset,(0x18)      @ Power Manager GPIO Edge Detect Status Register
	 .equ 	xlli_PCFR_offset,(0x1C)      @ Power Manager General Configuration Register
    .equ 	xlli_PGSR0_offset,(0x20)      @ Power Manager GPIO Sleep State Register for GP [31-0]
    .equ 	xlli_PGSR1_offset,(0x24)      @ Power Manager GPIO Sleep State Register for GP [63-32]
    .equ 	xlli_PGSR2_offset,(0x28)      @ Power Manager GPIO Sleep State Register for GP [95-64]
    .equ 	xlli_PGSR3_offset,(0x2C)      @ Power Manager GPIO Sleep State Register for GP [120-96]
	 .equ 	xlli_RCSR_offset,(0x30)      @ Reset Controller Status Register
	 .equ 	xlli_PSLR_offset,(0x34)      @ Power Manager Sleep Mode Config Register
	 .equ 	xlli_PSTR_offset,(0x38)      @ Power Manager Standby Mode Config Register
	 .equ 	xlli_PSNR_offset,(0x3C)      @ Power Manager Sense Moce Config Register
	 .equ 	xlli_PVCR_offset,(0x40)      @ Power Manager Voltage Change Control Register
     .equ    xlli_PKWR_offset,(0x50)      @ Power Manager Keyboard Wake-up Enable Register
     .equ    xlli_PKSR_offset,(0x54)      @ Power Manager Keyboard Edge-Detect Status Register
   .equ   xlli_PI2DBR_offset,(0x188)      @ Power I2C Data Buffer Register
    .equ   xlli_PI2CR_offset,(0x190)      @ Power I2C Control Register
    .equ   xlli_PI2SR_offset,(0x198)      @ Power I2C Status Register
   .equ   xlli_PI2SAR_offset,(0x1A0)      @ Power I2C Slave Address Register

@
@ POWER MANAGER register bit masks 
@
	 .equ    xlli_PSSR_SSS,(0x01)      @ Software Sleep Status
	 .equ    xlli_PSSR_BFS,(0x02)      @ Battery Fault Status
	 .equ    xlli_PSSR_VFS,(0x04)      @ VCC Fault Status
     .equ    xlli_PSSR_PH,(0x10)      @ Peripheral Control Hold
	 .equ    xlli_PSSR_RDH,(0x20)      @ Read Disable Hold

     .equ    xlli_PCFR_OPDE,(0x01)      @ Processor (13MHz) osc power-down enable
       .equ    xlli_PCFR_FP,(0x02)      @ Float PCMCIA during sleep modes
       .equ    xlli_PCFR_FS,(0x04)      @ Float Static Chip Selects
 .equ    xlli_PCFR_SYSEN_EN,(0x20)      @ SYS_EN pin
    .equ    xlli_PCFR_DC_EN,(0x80)      @ Deep-Sleep Mode

     .equ    xlli_PWER_WE0,(0x01)      @ Wake-up Enable GPIO pin 0
     .equ    xlli_PWER_WE1,(0x02)      @ Wake-up Enable GPIO pin 1
   .equ    xlli_PWER_WERTC,(0x80000000)@ RTC Standby, Wake-up Enable-

@
@ MEMORY CONTROLLER base address and register offsets from the base address 
@

       .equ 	xlli_MEMORY_CONFIG_BASE,0x48000000

	  .equ     xlli_MDCNFG_offset,(0x00)
	  .equ     xlli_MDREFR_offset,(0x04)
	  .equ     xlli_MSC0_offset,(0x08)
	  .equ     xlli_MSC1_offset,(0x0C)
      .equ     xlli_MSC2_offset,(0x10)
      .equ     xlli_MECR_offset,(0x14)
     .equ     xlli_SXLCR_offset,(0x18)
    .equ     xlli_SXCNFG_offset,(0x1C)
   .equ     xlli_FLYCNFG_offset,(0x20)
     .equ     xlli_SXMRS_offset,(0x24)                                       
    .equ     xlli_MCMEM0_offset,(0x28)
    .equ     xlli_MCMEM1_offset,(0x2C)
    .equ     xlli_MCATT0_offset,(0x30)
    .equ     xlli_MCATT1_offset,(0x34)
     .equ     xlli_MCIO0_offset,(0x38)
     .equ     xlli_MCIO1_offset,(0x3C)
     .equ     xlli_MDMRS_offset,(0x40)
  .equ     xlli_BOOT_DEF_offset,(0x44)
  .equ     xlli_ARB_CNTL_offset,(0x48)
   .equ     xlli_BSCNTR0_offset,(0x4C)
   .equ     xlli_BSCNTR1_offset,(0x50)
 .equ     xlli_LCDBSCNTR_offset,(0x54)
   .equ     xlli_MDMRSLP_offset,(0x58)
   .equ     xlli_BSCNTR2_offset,(0x5C)
   .equ     xlli_BSCNTR3_offset,(0x60)

@ Memory Controller bit defs

     .equ     xlli_MDREFR_K0DB4,(0x20000000)    @ Sync Static Clock 0 divide by 4 control/status
    .equ     xlli_MDREFR_K2FREE,(0x02000000)    @ Set to force SDCLK[2] to be free running
    .equ     xlli_MDREFR_K1FREE,(0x01000000)    @ Set to force SDCLK[1] to be free running
    .equ     xlli_MDREFR_K0FREE,(0x00800000)    @ Set to force SDCLK[0] to be free running
    .equ     xlli_MDREFR_SLFRSH,(0x00400000)    @ Self Refresh Control Status bit
       .equ     xlli_MDREFR_APD,(0x00100000)    @ Auto Power Down bit
     .equ     xlli_MDREFR_K2DB2,(0x00080000)    @ SDRAM clock pin 2 divide by 2 control/status
     .equ     xlli_MDREFR_K1DB2,(0x00020000)    @ SDRAM clock pin 1 divide by 2 control/status
     .equ     xlli_MDREFR_K1RUN,(0x00010000)    @ SDRAM clock pin 1 run/control status
     .equ     xlli_MDREFR_E1PIN,(0x00008000)    @ SDRAM clock Enable pin 1 level control/status
     .equ     xlli_MDREFR_K0DB2,(0x00004000)    @ Sync Static Memory Clock divide by 2 control/status
     .equ     xlli_MDREFR_K0RUN,(0x00002000)    @ Sync Static Memory Clock Pin 0
     .equ     xlli_MDREFR_E0PIN,(0x00000100)    @ SDRAM clock enable pin 0 (Cotulla ONLY!!)

       .equ     xlli_MDCNFG_DE0,(0x00000001)    @ SDRAM enable bit for partition 0
       .equ     xlli_MDCNFG_DE1,(0x00000002)    @ SDRAM enable bit for partition 1
       .equ     xlli_MDCNFG_DE2,(0x00010000)    @ SDRAM enable bit for partition 2
       .equ     xlli_MDCNFG_DE3,(0x00020000)    @ SDRAM enable bit for partition 3
     .equ     xlli_MDCNFG_DWID0,(0x00000004)    @ SDRAM bus width (clear = 32 bits, set = 16 bits)

@
@ INTERNAL MEMORY CONTROLLER base address and register offsets from the base address 
@

      .equ 	xlli_IMEMORY_CONFIG_BASE,(0x58000000)

	 .equ     xlli_IMPMCR_offset,(0x00)       @ Internal Memory Power Manager Control Register
   .equ     xlli_IMPMSR_offset,(0x08)       @ Internal Memory Power Management Status Register


@
@ INTERRUPT CONTROLLER base address and register offsets from the base address
@ 

      .equ     xlli_INTERREGS_PHYSICAL_BASE,(0x40D00000)

      .equ     xlli_ICIP_offset,(0x00)   @ Interrupt Controller IRQ Pending Register
      .equ     xlli_ICMR_offset,(0x04)   @ Interrupt Controller Mask Register