delphierror.txt

该文档收集了DELPHI编译和执行过程中的各种错误提示信息

                *******************************
                *      编 译 错 误 信 息      *
                *******************************
';' not allowed before 'ELSE'                                             ElSE前不允许有“;”
'<clause>' clause not allowed in OLE automation section                   在OLE自动区段不允许“<clause>”子句
'<name>' is not a type identifier                                         <name>不是类型标识符
'<name>' not previously declared as a PROPERTY                            <name>前面没有说明PROPERTY
'GOTO <label>' leads into or out of TRY statement                         GOTO <label>进入或超出TRY语句的范围
<clause1> clause expected, but <clause2> found                            要求子句<clause1>，但出现<clause2>
16-Bit fixup encountered in object file '<text>'                          在对象文件<text>遇到16位修复
486/487 instructions not enabled                                          不能用486/487指令
Abstract methods must be virtual or dynamic                               抽象方法必须为虚拟的或动态的
Array type required                                                       需要数组类型
Assignment to FOR-Loop variable '<Name>'                                  给FOR循环变量<Name>赋值
Bad argument type in variable type array constructor                      在变量类型数组结构中不正确的参数类型
Bad file format '<name>'                                                  错误的文件格式<name>
Bad file format: <Filename>                                               错误的文件格式<Filename>
Bad global symbol definition: '<Name>' in object file '<Filename>'        对象文件'<Filename>'中错误的全局符号定义'<Name>'
Bad unit format: <Filename>                                               错误的单元格式<Filename>
BREAK or CONTINUE outside of loop                                         BREAK或CONTINUE超出循环
Cannot add or subtract relocatable symbols                                不能增加或减少可重置的符号
Cannot assign to a read-only property                                     不能指定只读属性
Cannot BREAK, CONTINUE or EXIT out of a FINALLY clause                    超出FINALLY子句的范围，不能使用BREAK,CONTINUE或EXIT语句
Cannot initialize local variables                                         不能初始化局部变量
Cannot initialize multiple variables                                      不能初始化多个变量
Cannot initialize thread local variables                                  不能初始化线程局部变量
Cannot override a static method                                           不能覆盖静态方法
Cannot read a write-only property                                         不能读取只写属性
Case label outside of range of case expression                            CASE标号超出了CASE表达式的范围
Circular unit reference to <Unitname>                                     对单元<Unitname>循环引用
Class already has a default property                                      类已具有默认的属性
Class does not have a default property                                    类没有默认的属性
Class or object types only allowed in type section                        在类型区段只允许有类或对象类型
Class type required                                                       需要类类型
Close error on <Filename>                                                 文件<Filename>关闭错误
Compile terminated by user                                                用户中止编译
Constant expected                                                         要求常量
Constant expression expected                                              要求常量表达式
Constant expression violates subrange bounds                              常量表达式超出子界范围
Constant object cannot be passed as var parameter                         常量对象不能作为变量参数传递
Constant or type identifier expected                                      要求常量或类型标识符
Constants cannot be used as open array arguments                          常量不能用作打开数组参数
Constructing instance of '<name>' containing abstract methods             构造的<name>实体包含抽象的方法
Could not compile used unit '<Unitname>'                                  不能用单元<Unitname>编译
Could not create output file <Filename>                                   不能建立输出文件<Filename>
Could not load RLINK32.DLL                                                不能加载RLINK32.DLL
Data type too large: exceeds 2 GB                                         数据类型太大：超过2GB
Declaration of <Name> differs from previous declaration                   <Name>的说明与先前的说明不同
Default property must be an array property                                默认的属性必须为数组属性
Default values must be of ordinal, pointer or small set type              默认的值必须为序数、指针或小集类型
Destination cannot be assigned to                                         目标不能指定
Destination is inaccessible                                               目标不能存取
Dispid '<number>' already used by '<name>'                                DISPID标识号已被<name>使用
Dispid clause only allowed in OLE automation section                      DISPID子句只能在OLE自动区段中使用
Division by zero                                                          除数为零
Duplicate case label                                                      CASE标号重复
Duplicate tag value                                                       重复的标志值
Dynamic method or message handler not allowed here                        这里不允许有动态方法或信息处理程序
Dynamic methods and message handlers not allowed in OLE automation section在OLE自动区段不允许有动态方法或消息处理程序
Element 0 inaccessible - use 'Length' or 'SetLength'                      元素0不能存取-使用LENGTH或SETLENGTH
Error in numeric constant                                                 数值常量错误
EXCEPT or FINALLY expected                                                要求EXCEPT或FINALLY
EXPORTS allowed only at global scope                                      EXPORTS只允许在全局范围使用
Expression has no value                                                   表达式没有值
Expression too complicated                                                表达式太复杂
Field definition not allowed in OLE automation section                    在OLE自动区段中不允许域定义
Field definition not allowed after methods or properties                  在方法或属性后不允许域定义
Field or method identifier expected                                       要求域或方法标识符
File not found: <Filename>                                                文件<Filename>没有找到
File type not allowed here                                                这儿不允许文件类型
For loop control variable must be simple local variable                   FOR循环控制变量必须为简单局部变量
For loop control variable must have ordinal type                          FOR循环控制变量必须为序数类型
FOR or WHILE loop executes zero times - deleted                           FOR或WHILE循环执行零次-删除
FOR-Loop variable '<name>' cannot be passed as var parameter              FOR循环变量<name>不能作为参数传递
FOR-Loop variable '<Name>' may be undefined after loop                    在循环后的FOR循环变量<NAME>是不确定的
Function needs result type                                                函数需要结果类型
Identifier redeclared: '<name>'                                           标识符<name>重复说明
Illegal character in input file: '<char>' ($<hex>)                        在输入文件中的非法字符'<char>'
Illegal message method index                                              非法的消息方法指针
Illegal reference to symbol '<Name>' in object file '<Filename>'          在对象文件<filename>中对符号<name>的非法引用
Illegal type in OLE automation section: '<typename>'                      在OLE自动区段中的非法类型<typename>
Illegal type in Read/Readln statement                                     在Read/Readln语句中的非法类型
Illegal type in Write/Writeln statement                                   在Write/Writeln语句中的非法类型
Inaccessible value                                                        不可存取的值
Incompatible types: '<name>' and '<name>'                                 不兼容的类型<name>和<name>
Incompatible types: <text>                                                不兼容的类型<text>
Inline assembler stack overflow                                           内联汇编溢出
Inline assembler syntax error                                             内联汇编语法错误
Instance variable '<name>' inaccessible here                              实体变量<name>在这里不能存取
Integer constant or variable name expected                                要求整形常量或变量名
Integer constant too large                                                整型常量太大
Internal error: <ErrorCode>                                               内部错误<errorcode>
Invalid combination of opcode and operands                                操作码与操作对象的无效组合
Invalid compiler directive: '<Directive>'                                 无效的编译指令<DIRECTIVE>
Invalid function result type                                              无效的函数值类型
Invalid message parameter list                                            无效的消息参数列表
Invalid register combination                                              无效的寄存器组合
Invalid typecast                                                          无效的TYPECASE
Label '<Name>' is not declared in current procedure                       在当前的过程中没有说明标号<NAME>
Label already defined: '<Labelname>'                                      标号<LABELNAME>已经定义
Label declaration not allowed in interface part                           在界面部分不允许标号说明
Label declared and referenced, but not set: '<label>'                     标号被<label>说明及引用,但不能设置
Label expected                                                            要求标号
Left side cannot be assigned to                                           左边不能赋值
Line too long (more than 255 characters)                                  行太长(超出255个字符)
Local class or object types not allowed                                   不允许局部的类或对象类型
Local procedure/function '<Name>' assigned to procedure variable          局部过程/函数<NAME>赋给过程变量
LOOP/JCXZ distance out of range                                           LOOP/JCXZ距离超出范围
Low bound exceeds high bound                                              下界超过上界
Memory reference expected                                                 要求内存引用
Method '<name>' hides virtual method of base type '<name>'                方法<NAME>隐藏了基类型为<NAME>的虚拟方法
Method '<name>' not found in base class                                   在基类中没有找到方法<NAME>
Method identifier expected                                                要求方法标识符
Missing ENDIF directive                                                   缺少ENDIF指令
Missing operator or semicolon                                             缺少操作符或分号
Missing or invalid conditional symbol in '$<symbol>' directive            在$<symbol>指令中缺少或无效的条件符号
Missing parameter type                                                    缺少参数类型
Necessary library helper function was eliminated by linker                必要的库帮助函数被连接程序删除
No definition for abstract method '<name>' allowed                        抽象方法<NAME>没有定义
Not enough actual parameters                                              没有足够的实际参数
Number of elements differs from declaration                               元素数与说明不同
Numeric overflow                                                          数值溢出
Object or class type required                                             需要对象或类类型
Object type required                                                      需要对象类型
Only register calling convention allowed in OLE automation section        在OLE自动区段中只允许寄存器调用约定
Operand size mismatch                                                     运算对象大小匹配
Operator not applicable to this operand type                              运算符不使用于这一运算对象类型
Order of fields in record constant differs from declaration               在记录常量中的域次序与说明不同
Ordinal type required                                                     需要序数类型
Out of memory                                                             内存溢出
Overflow in conversion or arithmetic operation                            转换或算术操作溢出
Overriding automated virtual method '<name>' cannot specify a dispid      覆盖的自动虚拟方法<NAME>不能指定DISPID
PACKED not allowed here                                                   这里不允许PACKED
Pointer type required                                                     需要指针类型
Procedure cannot have a result type                                       过程不能有结果类型
Procedure DISPOSE needs destructor                                        过程DISPOSE需要destructor
Procedure FAIL only allowed in constructor                                过程FAIL只允许在constructor方法中
Procedure NEW needs constructor                                           过程NEW需要constructor方法
PROCEDURE or FUNCTION expected                                            要求PROCEDURE或FUNCTION
Procedure or function name expected                                       要求过程或函数名
Program or unit '<name>' recursively uses itself                          程序或单元递归
Property '<name>' does not exist in base class                            在基类中<NAME>属性不存在
Published property '<name>' cannot be of type <type>                      Published属性<NAME>不能具有类型<type>
Published Real48 property '<name>' must be Single, Double or Extended     Published REAL属性<NAME>必须为Single, Double或Extended
Re-raising an exception only allowed in exception handler                 在意外处理中只允许重新引起意外处理
Read error on <Filename>                                                  文件<FILENAME>读出错
Record, object or class type required                                     需要记录,对象或类类型
Redeclaration of '<name>' hides a member in the base class                <NAME>的重新说明隐藏了基类中一个元素
Redeclaration of property not allowed in OLE automation section           在OLE自动区段中不允许属性重复说明
Return value of function '<Functionname>' might be undefined              函数<Functionname>的返回值可能没有定义
Seek error on <Filename>                                                  在<FILENAME>中搜索错误
Segment/Offset pairs not supported in Borland 32-bit Pascal               在Borland 32位的PASCAL中不支持Segment/Offset对
Sets may have at most 256 elements                                        集至少有256个元素
Size of published set '<name>' is >32 bits                                published集<NAME>的大小大于32字节
Slice standard function only allowed as open array argument               Slice标准函数只允许作为打开数组参数
Statement expected, but expression of type '<type>' found                 要求语句,但出现类型<TYPE>的表达式
Statements not allowed in interface part                                  在界面中不允许的语句
String constant too long                                                  字符串常量太长
String constant truncated to fit STRING[<number>]                         字符串常量截取到适合STRING[<number>]
Strings may have at most 255 elements                                     字符串至少255个元素
Structure field identifier expected                                       要求结构域标识符
Syntax error in real number                                               实数语法错误
System unit out of date or corrupted: missing '<name>'                    系统单元超出日期或损坏:缺少<NAME>
Text after final 'END.                                                    编译器忽略END.后的文本
This form of method call only allowed for class methods                   该方法的窗体只允许类方法
This form of method call only allowed in methods of derived types         该方法的窗体只允许在导出类型的方法中
This type cannot be initialized                                           这一类型不能初始化
Thread local variables cannot be ABSOLUTE                                 线程局部变量不能是ABSOLUTE
Thread local variables cannot be local to a function or procedure         线程局部变量对函数不能是局部的
Too many actual parameters                                                太多的实际参数
Too many conditional symbols                                              太多的条件符号
Type '<name>' has no type info                                            类型<NAME>没有类型信息
Type '<Name>' is not yet completely defined                               类型<NAME>至今没有定义
Type '<name>' must be a class to have a PUBLISHED section                 类型<NAME>必须是在PUBLISHED区段中的类
Type '<name>' must be a class to have OLE automation                      类型<NAME>必须是具有OLE自动的类
Type '<name>' needs finalization - not allowed in file type               类型<NAME>需要初始化-不允许在文件类型中
Type '<name>' needs finalization - not allowed in variant record          类型<NAME>需要初始化-不允许在变体记录
Type expected                                                             要求TYPE
Type not allowed in OLE Automation call                                   在OLE自动调用中不允许的类型
Type of expression must be BOOLEAN                                        表达式的类型必须为BOOLEAN型
Type of expression must be INTEGER                                        表达式的类型必须为INTEGER型
TYPEINFO standard function expects a type identifier                      TYPEINFO标准函数要求类型标识符
TYPEOF can only be applied to object types with a VMT                     TYPEOF只能用于具有VMT的对象类型
Types of actual and formal var parameters must be identical               形参与实参必须一致
Undeclared identifier: '<name>'                                           未说明的标识符<NAME>
Unexpected end of file in comment started on line <Number>                以行<Number>开始的注释中出现不应有的文件结束
Unit <Unit1> was compiled with a different version of <Unit2>             单元<UNIT1>与不同版本的<UNIT2>编译
Unit name mismatch: '<Unitname>'                                          单元名不匹配<UNITNAME>
Unknown directive: '<Directive>'                                          未知的指令<DIRECTIVE>
Unnamed arguments must precede named arguments in OLE Automation call     在OLE自动调用中未命名的参数必须在命名的参数前
Unsatisfied forward or external declaration: '<Procedurename>'            不满足的向前或外部说明<Procedurename>
Unterminated string                                                       未结束的字符串