ram_fill.asm

来自「C8051F2xx gpio asm 代码」· 汇编 代码 · 共 66 行

;-----------------------------------------------------------------------------
;	CYGNAL INTEGRATED PRODUCTS, INC.
;
;
; 	FILE NAME  	: RAM_FILL.ASM 
; 	TARGET MCU	: C8051F2xx
; 	DESCRIPTION	: This program disables the watchdog timer and fills RAM with 
;				  	  value equal to address.
;
;  	NOTES:
;	(1)	This note intentionally left blank.
;
;
;-----------------------------------------------------------------------------

$include (c8051F200.inc)               ; Include register definition file

;-----------------------------------------------------------------------------
; EQUATES
;-----------------------------------------------------------------------------


;-----------------------------------------------------------------------------
; VARIABLES
;-----------------------------------------------------------------------------
	
																
;-----------------------------------------------------------------------------
; RESET and INTERRUPT VECTORS
;-----------------------------------------------------------------------------

               ; Reset Vector
               CSEG AT 00h					
               ljmp  Main              ; Jump beyond interrupt vector space.

;-----------------------------------------------------------------------------
; CODE SEGMENT
;-----------------------------------------------------------------------------


RAM_Fill       segment  CODE

               rseg     RAM_Fill       ; Switch to this code segment.
               using    0              ; Specify register bank for the
                                       ; following program code.

Main:          ; Disable the WDT. (IRQs not enabled at this point.)
               ; If interrupts were enabled, we would need to explicitly 
               ; disable them so that the 2nd move to WDTCN occurs no more 
               ; than four clock cycles after the first move to WDTCN.

               mov   WDTCN, #0DEh
               mov   WDTCN, #0ADh

               mov   R0, #00H          ; use R0 as pointer to memory location 
loop:          mov   @R0, AR0          ; write to indexed address with 
                                       ; address value
               djnz  R0, loop          ; check if finished
	
               sjmp  $                 ; loop here forever


;-----------------------------------------------------------------------------
; End of file.

END