tahiti_def.h

mx21 Nor flash Bootloader 源代码

/******************************************************************************

 C   H E A D E R   F I L E

*******************************************************************************

 Project Name : Tahiti Bootstrap
 Project No.  : 
 Title        : 
 Template Ver : 0.3
 File Name    : Tahiti_def.h  
 Last Modified: Feb 21, 2003

 Description  : Definition header for DBMX2 silicon. 

 Assumptions  : NA
 
 Dependency Comments : NA

 Project Specific Data : NA

******************************************************************************/

#ifndef MX1_DEF_INC
#define MX1_DEF_INC
//add for pll choice in bootloader
#define __PLL_CHOICE__ 
//end

/*************************** Header File Includes ****************************/

//;#########################################			
//;# AIPI1                                 #			
//;# $1000_0000 to $1000_0FFF              #			
//;#########################################			
#define AIPI1_BASE_ADDR	      	0x10000000	
#define AIPI1_PSR0	      	(AIPI1_BASE_ADDR+0x00)	//  32bit Peripheral Size Reg 0
#define AIPI1_PSR1	     	(AIPI1_BASE_ADDR+0x04)	//  32bit Peripheral Size Reg 1
#define AIPI1_PAR	      	(AIPI1_BASE_ADDR+0x08)	//  32bit Peripheral Access Reg

#define BIR_115200	1151
#define BIR_57600	575
     
//
// ;---------------------------------------;
// ; UART1                                 ;
// ; $1000A000 to $1000_A0FF             ;
// ;---------------------------------------;
#define UART1_BASE_ADDR         0x1000A000                
#define UART1_RXDATA            UART1_BASE_ADDR                
#define UART1_TXDATA            (UART1_BASE_ADDR+0x40)                
#define UART1_CR1               (UART1_BASE_ADDR+0x80)                
#define UART1_CR2               (UART1_BASE_ADDR+0x84)                
#define UART1_CR3               (UART1_BASE_ADDR+0x88)                
#define UART1_CR4               (UART1_BASE_ADDR+0x8C)                
#define UART1_FCR               (UART1_BASE_ADDR+0x90)                
#define UART1_SR1               (UART1_BASE_ADDR+0x94)                
#define UART1_SR2               (UART1_BASE_ADDR+0x98)                
#define UART1_ESC               (UART1_BASE_ADDR+0x9C)                
#define UART1_TIM               (UART1_BASE_ADDR+0xA0)                
#define UART1_BIR               (UART1_BASE_ADDR+0xA4)                
#define UART1_BMR               (UART1_BASE_ADDR+0xA8)                
#define UART1_BRC               (UART1_BASE_ADDR+0xAC)                
#define UART1_ONEMS             (UART1_BASE_ADDR+0xB0)                
#define UART1_TS	            (UART1_BASE_ADDR+0xB4) 


#define UART2_CR2				0x1000B084
#define UART2_CR3				0x1000B088
//------------------------------------------
//System Control
//------------------------------------------

#define SYS_BASE_ADDR	      	0x10027800	
#define SYS_SIDR	      	(SYS_BASE_ADDR+0x10)	//;  128bit Silicon ID Reg
#define SYS_FMCR	      	(SYS_BASE_ADDR+0x14)	//;  Functional Muxing Control Reg
#define SYS_GPCR	      	(SYS_BASE_ADDR+0x18)	//;  Global Peripheral Control Reg
#define SYS_WBCR	      	(SYS_BASE_ADDR+0x1C)	//;  Well Bias Control Reg
#define SYS_DSCR1	      	(SYS_BASE_ADDR+0x20)	//;  Drive Strength Crtl Reg 1
#define SYS_DSCR2	      	(SYS_BASE_ADDR+0x24)	//;  Drive Strength Crtl Reg 2
#define SYS_DSCR3	      	(SYS_BASE_ADDR+0x28)	//;  Drive Strength Crtl Reg 3
#define SYS_DSCR4	      	(SYS_BASE_ADDR+0x2C)	//;  Drive Strength Crtl Reg 4
#define SYS_DSCR5	      	(SYS_BASE_ADDR+0x30)	//;  Drive Strength Crtl Reg 5
#define SYS_DSCR6	      	(SYS_BASE_ADDR+0x34)	//;  Drive Strength Crtl Reg 6
#define SYS_DSCR7	      	(SYS_BASE_ADDR+0x38)	//;  Drive Strength Crtl Reg 7
#define SYS_DSCR8	      	(SYS_BASE_ADDR+0x3C)	//;  Drive Strength Crtl Reg 8
#define SYS_DSCR9	      	(SYS_BASE_ADDR+0x40)	//;  Drive Strength Crtl Reg 9
#define SYS_DSCR10	      	(SYS_BASE_ADDR+0x44)	//;  Drive Strength Crtl Reg 10
#define SYS_DSCR11	      	(SYS_BASE_ADDR+0x48)	//;  Drive Strength Crtl Reg 11
#define SYS_DSCR12	      	(SYS_BASE_ADDR+0x4C)	//;  Drive Strength Crtl Reg 12
#define SYS_PSCR	      	(SYS_BASE_ADDR+0x50)	//;  Priority Control/select Reg



//;#########################################			
//;# #define GPIO                          #			
//;# $1001_5000 to $1001_5FFF              #			
//;#########################################			
#define GPIOA_BASE_ADDR	       	0x10015000	
#define GPIOA_DDIR	      (GPIOA_BASE_ADDR+0x00)   //  32bit gpio pta data direction reg
#define GPIOA_OCR1	      (GPIOA_BASE_ADDR+0x04)   //  32bit gpio pta output config 1 reg
#define GPIOA_OCR2	      (GPIOA_BASE_ADDR+0x08)   //  32bit gpio pta output config 2 reg
#define GPIOA_ICONFA1	      (GPIOA_BASE_ADDR+0x0C)   //  32bit gpio pta input config A1 reg
#define GPIOA_ICONFA2	      (GPIOA_BASE_ADDR+0x10)   //  32bit gpio pta input config A2 reg
#define GPIOA_ICONFB1	      (GPIOA_BASE_ADDR+0x14)   //  32bit gpio pta input config B1 reg
#define GPIOA_ICONFB2	      (GPIOA_BASE_ADDR+0x18)   //  32bit gpio pta input config B2 reg
#define GPIOA_DR	      (GPIOA_BASE_ADDR+0x1C)   //  32bit gpio pta data reg
#define GPIOA_GIUS	      (GPIOA_BASE_ADDR+0x20)   //  32bit gpio pta in use reg
#define GPIOA_SSR	      (GPIOA_BASE_ADDR+0x24)   //  32bit gpio pta sample status reg
#define GPIOA_ICR1	      (GPIOA_BASE_ADDR+0x28)   //  32bit gpio pta interrupt ctrl 1 reg
#define GPIOA_ICR2	      (GPIOA_BASE_ADDR+0x2C)   //  32bit gpio pta interrupt ctrl 2 reg
#define GPIOA_IMR	      (GPIOA_BASE_ADDR+0x30)   //  32bit gpio pta interrupt mask reg
#define GPIOA_ISR	      (GPIOA_BASE_ADDR+0x34)   //  32bit gpio pta interrupt status reg
#define GPIOA_GPR	      (GPIOA_BASE_ADDR+0x38)   //  32bit gpio pta general purpose reg
#define GPIOA_SWR	      (GPIOA_BASE_ADDR+0x3C)   //  32bit gpio pta software reset reg
#define GPIOA_PUEN	      (GPIOA_BASE_ADDR+0x40)   //  32bit gpio pta pull up enable reg
			
#define GPIOB_BASE_ADDR	       	0x10015100	
#define GPIOB_DDIR	      (GPIOB_BASE_ADDR+0x00)   //  32bit gpio ptb data direction reg
#define GPIOB_OCR1	      (GPIOB_BASE_ADDR+0x04)   //  32bit gpio ptb output config 1 reg
#define GPIOB_OCR2	      (GPIOB_BASE_ADDR+0x08)   //  32bit gpio ptb output config 2 reg
#define GPIOB_ICONFA1	      (GPIOB_BASE_ADDR+0x0C)   //  32bit gpio ptb input config A1 reg
#define GPIOB_ICONFA2	      (GPIOB_BASE_ADDR+0x10)   //  32bit gpio ptb input config A2 reg
#define GPIOB_ICONFB1	      (GPIOB_BASE_ADDR+0x14)   //  32bit gpio ptb input config B1 reg
#define GPIOB_ICONFB2	      (GPIOB_BASE_ADDR+0x18)   //  32bit gpio ptb input config B2 reg
#define GPIOB_DR	      (GPIOB_BASE_ADDR+0x1C)   //  32bit gpio ptb data reg
#define GPIOB_GIUS	      (GPIOB_BASE_ADDR+0x20)   //  32bit gpio ptb in use reg
#define GPIOB_SSR	      (GPIOB_BASE_ADDR+0x24)   //  32bit gpio ptb sample status reg
#define GPIOB_ICR1	      (GPIOB_BASE_ADDR+0x28)   //  32bit gpio ptb interrupt ctrl 1 reg
#define GPIOB_ICR2	      (GPIOB_BASE_ADDR+0x2C)   //  32bit gpio ptb interrupt ctrl 2 reg
#define GPIOB_IMR	      (GPIOB_BASE_ADDR+0x30)   //  32bit gpio ptb interrupt mask reg
#define GPIOB_ISR	      (GPIOB_BASE_ADDR+0x34)   //  32bit gpio ptb interrupt status reg
#define GPIOB_GPR	      (GPIOB_BASE_ADDR+0x38)   //  32bit gpio ptb general purpose reg
#define GPIOB_SWR	      (GPIOB_BASE_ADDR+0x3C)   //  32bit gpio ptb software reset reg 
#define GPIOB_PUEN	      (GPIOB_BASE_ADDR+0x40)   //  32bit gpio ptb pull up enable reg
			
#define GPIOC_BASE_ADDR	       	0x10015200	
#define GPIOC_DDIR	      (GPIOC_BASE_ADDR+0x00)   //  32bit gpio ptc data direction reg
#define GPIOC_OCR1	      (GPIOC_BASE_ADDR+0x04)   //  32bit gpio ptc output config 1 reg
#define GPIOC_OCR2	      (GPIOC_BASE_ADDR+0x08)   //  32bit gpio ptc output config 2 reg
#define GPIOC_ICONFA1	      (GPIOC_BASE_ADDR+0x0C)   //  32bit gpio ptc input config A1 reg
#define GPIOC_ICONFA2	      (GPIOC_BASE_ADDR+0x10)   //  32bit gpio ptc input config A2 reg
#define GPIOC_ICONFB1	      (GPIOC_BASE_ADDR+0x14)   //  32bit gpio ptc input config B1 reg
#define GPIOC_ICONFB2	      (GPIOC_BASE_ADDR+0x18)   //  32bit gpio ptc input config B2 reg
#define GPIOC_DR	      (GPIOC_BASE_ADDR+0x1C)   //  32bit gpio ptc data reg
#define GPIOC_GIUS	      (GPIOC_BASE_ADDR+0x20)   //  32bit gpio ptc in use reg
#define GPIOC_SSR	      (GPIOC_BASE_ADDR+0x24)   //  32bit gpio ptc sample status reg
#define GPIOC_ICR1	      (GPIOC_BASE_ADDR+0x28)   //  32bit gpio ptc interrupt ctrl 1 reg