oemsetup.inf

It is something about net security also.Maybe useful.Hope you like it.

; NETGEAR, Inc. 2000-2001

[Version]
Signature="$Windows NT$"
Class=Net
ClassGUID={4D36E972-E325-11CE-BFC1-08002BE10318}
Provider=%NGE%

[Strings]
%NGE%="NETGEAR"

[Identification]
OptionType = NetAdapter

[PlatformsSupported]
    PCI

[Options]
   NGEGIGA 

[FileConstants]
UtilityInf      = "UTILITY.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "driver"
Exit_Code       = 0
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer    = "NETGEAR"
ProductMajorVersion     = "4.0"
ProductMinorVersion     = "1.41"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)
VendorID = 4107  ;; 100B (DEC)
ProductSoftwareName     = "GA622ND4"
ProductSoftwareTitle    = "NETGEAR GA622T Gigabit UTP Adapter"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\GA622ND4.SYS"
NetRuleSoftwareType     = "GA622ND4Sys ndisDriver GA622ND4Driver"
NetRuleSoftwareUse      = $(SoftwareType)
NetRuleSoftwareBindForm = """GA622ND4Sys"" yes no container"
NetRuleSoftwareClass    = {"GA622ND4Driver basic"}
NetRuleSoftwareSWBindable = {"GA622ND4Driver NGEGIGAAdapter non exclusive 100"}
ProductHardwareName = "GA622T"
ProductHardwareNGEGIGATitle = "NETGEAR GA622T Gigabit UTP Adapter"
NetRuleHardwareNGEGIGAType  = "NGEGIGA NGEGIGAAdapter"
NetRuleHardwareNGEGIGAClass = {"NGEGIGAAdapter basic"}
AdapterNGEGIGAType = 5   ;; PCI board
HelpNGEGIGAId = 30
NGEGIGACFID = 2232331     ;; 0x0022100B
NetRuleHardwareBindForm = " yes yes container"
ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"

HandleNull   = ""
NGECONFIG_HANDLE = $(HandleNull)


[GeneralConstants]
from      = ""
to        = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull         = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""
TRUE            = 1
FALSE           = 0
NoTitle            = 0
ExitState   = "Active"
OldVersionExisted = $(FALSE)
DriverPath      = $(!STF_NTPATH)\drivers

;
;  Initialize general constants
;
[InitGeneralConstants]
KeyInfo            = {}
CurrentControlSet  = "SYSTEM\CurrentControlSet"
ServicesBaseName   = $(CurrentControlSet)"\Services"
NetworkCardKeyName = $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards"

!RegLastError      = NO_ERROR

[DebugOptions]
;
;   Debugging variables
;
    !G:DebugOutputControl = 1
    TraceConfig = 1


[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate

[Identify]
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)

[ReturnOptions]
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)


    Ifcontains(i) $($0) in $(LanguageList)
	ifstr(i) $($1) == ""
	   goto returnoptions
	endif
	set PlatformList = ^(PlatformsSupported, 1)
	Ifcontains(i) $($1) in $(PlatformList)
	   goto returnoptions
	else
	   set Status = STATUS_NOTSUPPORTED
	   goto finish_ReturnOptions
	endif
    else
	set Status = STATUS_NOLANGUAGE
	goto finish_ReturnOptions
    endif

returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL

finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)

[InstallOption]
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)
    set LanguageList = ^(LanguagesSupported, 1)


    Ifcontains(i) $($0) NOT-IN $(LanguageList)
	Return STATUS_NOLANGUAGE
    endif
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    set NetRuleSoftwareBindable = $($R1)
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
	set Continue = "OK"
    endif
    read-syms FileConstants$(!STF_LANGUAGE)
    detect date
    set-title  $(Function$(Option)Title)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL


    EndWait

Begin = +


    Ifstr(i) $(!NTN_InstallMode) == deinstall
	set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
	set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
	set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
	  Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
	       Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
	       ifint $($ShellCode) != $(!SHELL_CODE_OK)
		     goto ShellCodeError
	       endif
	       set Error = $($R0)
	       set from = end
	       set to = end
	       goto nonfatalinfo
	  else
	       set StartLabel = configureadapter
	  endif
   else
	set StartLabel = installadapter
	set OEM_ABANDON_OPTIONS = {}
	set OEM_ABANDON_SOFTWARE = FALSE
	set OEM_ABANDON_ON = TRUE
    endif
    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)

installadapter = +


    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
	CloseRegKey $(KeyProduct)
	ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
	   Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
	       $(ProductVersion)
	   ifint $($ShellCode) != $(!SHELL_CODE_OK)
	       goto ShellCodeError
	   endif
	   goto end
	else
	   Shell $(UtilityInf), CardExistedDlg
	   ifint $($ShellCode) != $(!SHELL_CODE_OK)
	      goto ShellCodeError
	   endif
	   ifstr(i) $($R1) != "OK"
	       set CommonStatus = STATUS_USERCANCEL
	       goto end
	   endif
	   set OldVersionExisted = $(TRUE)
	endif
    Endif
    ifstr(i) $(DoCopy) == "YES"
	Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
	Ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Goto ShellCodeError
	Else-Ifstr(i) $($R0) == STATUS_FAILED
	    Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	       goto ShellCodeError
	    endif
	    set Error = $($R0)
	       Goto fatal
	Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
	       Goto successful
	Endif
	Set SrcDir = $($R1)
    endif
    Goto installproduct

configureadapter = +


   Ifstr(i) $(KeyProduct) == $(KeyNull)
	OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
	Ifstr $(KeyProduct) == $(KeyNull)
	    Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
	   Goto fatalregistry
	Endif
    Endif
;Getting service key
   read-syms DebugOptions
   Debug-Output "NGE.INF: In [InstallOption] section"
   Debug-OutPut "NGE.INF: start of the test"

    read-syms InitGeneralConstants
    set FS_KeyThisService = ""
    set FS_KeyComponent   = $(KeyProduct)

    Shell $(UtilityInf), BaseServiceKey

    set FS_KeyServices = $($R1)
    set RegistryErrorIndex = $($R0)

    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
       goto F_S_Return
    endif
;
;  Obtain the values for the component key.
;
    EnumRegValue $(FS_KeyComponent) FS_ValueList

    set FS_SvcName = ""
   Debug-OutPut "NGE.INF:  Service Name"$(FS_SvcName)
    ForListDo $(FS_ValueList)
        set FS_ValueName = *($($),1)
        Ifstr(i) $(FS_ValueName) == ServiceName
            set FS_SvcName = *($($),4)
            goto F_S_Break1
        endif
    EndForListDo
F_S_Break1 = +
   Debug-OutPut "NGE.INF:  Service Name found : "$(FS_SvcName)
    Ifstr $(FS_SvcName) == $(KeyNull)
       set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
       goto F_S_Return
    endif

    OpenRegKey $(FS_KeyServices) "" $(FS_SvcName) $(MAXIMUM_ALLOWED) FS_KeyThisService
    Ifstr $(FS_KeyThisService) == $(KeyNull)
       set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
       goto F_S_Return
    endif

F_S_Return = +
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        Ifstr $(FS_KeyThisService) != $(KeyNull)
           CloseRegKey $(FS_KeyThisService)
           Goto fatalregistry
        endif
    endif
   Debug-OutPut "NGE.INF:  Service Name evauated : "$(FS_SvcName)    
; Call the dll with the parameter as service key name overhere
   LoadLibrary "" $(!STF_WINDOWSSYSPATH)\NSCCONFIG.DLL NGECONFIG_HANDLE

   LibraryProcedure Result, $(NGECONFIG_HANDLE), +
            NGEConfigEntryPoint,  $(FS_SvcName) $(!STF_HWND)

   Ifstr(i) $(Result) == "Cancel"
	; cancel at install means remove any installing we've done
	; and possibly remove the files
	set CommonStatus = STATUS_USERCANCEL
	Debug-Output "Returned from dll with "$(Result)
	FreeLibrary $(NGECONFIG_HANDLE)
	CloseRegKey $(FS_KeyThisService)
	goto end
   Endif
   FreeLibrary $(NGECONFIG_HANDLE)
   CloseRegKey $(FS_KeyThisService)
;*************************************************************************
;  end of FindService
;*************************************************************************
    
    ifstr(i) $(!NTN_InstallMode) == configure
      goto end
    endif
     

installproduct =+


    StartWait
	set-div DeviceID = $($(Option)CFID) 65336
	Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DeviceID)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	     goto ShellCodeError
	endif
	ifstr(i) $($R0) == {}
	     set Error = $(CANNOT_FIND_ANY_CARD)
	     set CommonStatus = USER_CANCEL
	     set from = end
	     goto nonfatal
	endif
	set AdapterList = $($R0)

    ifint $(OldVersionExisted) == $(FALSE)
	Ifstr(i) $(DoCopy) == "YES"
	   Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
	   Ifint $($ShellCode) != $(!SHELL_CODE_OK)
	       Goto ShellCodeError
	   Else-Ifstr(i) $($R0) == STATUS_FAILED
	       Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
	       ifint $($ShellCode) != $(!SHELL_CODE_OK)
		  goto ShellCodeError
	       endif
	       set Error = $($R0)
	       Goto fatal
	   Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
	       Goto successful
	   Endif
	   Set SrcDir = $($R1)
	Endif
	install "Install-Option"
	ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
	   Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
	   ifint $($ShellCode) != $(!SHELL_CODE_OK)
	       goto ShellCodeError
	   endif
	   set Error = $($R0)
	   goto fatal
	endif
	Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), +
	    $(ProductSoftwareName), +
	    $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
	    $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
	    $(NetEventDLL)
	Set OEM_ABANDON_SOFTWARE = TRUE
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
	    EndWait
	    CloseRegKey $($R1)
	    CloseRegKey $($R2)
	    CloseRegKey $($R3)
	    CloseRegKey $($R4)
	    CloseRegKey $($R5)
	    goto fatalregistry
	endif
	Set SoftProductKey      = $($R1)
	Set SoftNetRuleKey      = $($R2)
	Set SoftServiceKey      = $($R3)
	Set SoftParameterKey    = $($R4)
	Set SoftLinkageKey      = $($R5)
	set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
			   {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
			   {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
			   {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
			   {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
			   {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
			   {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
	Shell  $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
	    EndWait
	    CloseRegKey $(SoftProductKey)
	    CloseRegKey $(SoftNetRuleKey)
	    CloseRegKey $(SoftServiceKey)
	    CloseRegKey $(SoftParameterKey)
	    CloseRegKey $(SoftLinkageKey)
	    goto fatalregistry
	endif
	set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
			    {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
			    {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
			    {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
			    {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareSWBindable)}, +
			    {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
	Shell  $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif