📄 电梯管理 程序.cpp
字号:
for (i=0;i<lift2.stay_in_floor+2;i++)
out_low=out_low || floor[i].up || floor[i].down;
low=0;
for (i=lift1.stay_in_floor+1;i>=0;i--)
low=low || floor[i].up || floor[i].down;
if (lift2.up)
{
if (lift2.stay_in_floor<9)
lift2.stay_in_floor++; //更新电梯所在的楼层
floor[lift2.stay_in_floor+2].up=0; //更新电梯外的“上”按钮状态
lift2.inbutton_state[lift2.stay_in_floor+2]=0;//更新电梯内该层按钮状态
flag1=in_high;
flag2=!flag1&(lift2.stay_in_floor>lift1.stay_in_floor)&out_high;
flag3=!flag1&(lift2.stay_in_floor==lift1.stay_in_floor)&out_high&(lift1.down || lift1.stay);
flag4=!flag1&(lift2.stay_in_floor<lift1.stay_in_floor)&lift1.up≬
flag5=!flag1&(lift2.stay_in_floor<lift1.stay_in_floor)&lift1.up&high_down;
flag6=!flag1&(lift2.stay_in_floor<lift1.stay_in_floor)&lift1.stay&between_near;
flag7=!flag1&(lift2.stay_in_floor<lift1.stay_in_floor)&lift1.down&between_up;
flag8=!flag1&(lift2.stay_in_floor<lift1.stay_in_floor)&lift1.down&high;
flag_up=flag1 || flag2 ||flag3 ||flag4 ||flag5 ||flag6 ||flag7 ||flag8;
if (flag_up)
{
lift2.all_persons=lift2.all_persons-lift2.out_persons[lift2.stay_in_floor+2]+floor[lift2.stay_in_floor+2].up_persons;//更新电梯1内的总人数
t_inperson=floor[lift2.stay_in_floor+2].up_persons;
floor[lift2.stay_in_floor+2].up_persons=0; //更新在该层楼等待进入电梯的人数
t_outperson=lift2.out_persons[lift2.stay_in_floor+2];
lift2.out_persons[lift2.stay_in_floor+2]=0; //更新在该层楼出去电梯的人数
}
else if (!flag_up)
{
flag9=!flag1&(lift2.stay_in_floor>lift1.stay_in_floor)&lift1.up&!out_high&!between_down;
flag10=!flag1&(lift2.stay_in_floor>lift1.stay_in_floor)&lift1.stay&!out_high&!between_near;
flag11=!flag1&(lift2.stay_in_floor>lift1.stay_in_floor)&lift1.down&!out_high&!between&!low_up;
flag12=!flag1&(lift2.stay_in_floor==lift1.stay_in_floor)&lift1.up&!out_low;
flag13=!flag1&(lift2.stay_in_floor==lift1.stay_in_floor)&lift1.stay&!out_low&!out_high;
flag14=!flag1&(lift2.stay_in_floor==lift1.stay_in_floor)&lift1.down&!out_high;
flag15=!flag1&(lift2.stay_in_floor<lift1.stay_in_floor)&lift1.up&!out_low&!between&!high_down;
flag16=!flag1&(lift2.stay_in_floor<lift1.stay_in_floor)&lift1.stay&!out_low&!between_near&!high_down;
flag17=!flag1&(lift2.stay_in_floor<lift1.stay_in_floor)&lift1.down&!out_low&!between_up&!high;
flag_stay=flag9 || flag10 || flag11 || flag12 || flag13 || flag14 || flag15 || flag16 || flag17;
if (flag_stay)
{
lift2.all_persons=lift2.all_persons-lift2.out_persons[lift2.stay_in_floor+2];//更新电梯1内的总人数
t_outperson=lift2.out_persons[lift2.stay_in_floor+2];
lift2.out_persons[lift2.stay_in_floor+2]=0; //更新在该层楼出去电梯的人数
lift2.up=0;lift2.down=0;lift2.stay=1; //更新电梯的运动状态
}
else
{
lift2.all_persons=lift2.all_persons-lift2.out_persons[lift2.stay_in_floor+2]+floor[lift2.stay_in_floor+2].down_persons;//更新电梯1内的总人数
t_inperson=floor[lift2.stay_in_floor+2].down_persons;
floor[lift2.stay_in_floor+2].down_persons=0; //更新在该层楼等待进入电梯的人数
t_outperson=lift2.out_persons[lift2.stay_in_floor+2];
lift2.out_persons[lift2.stay_in_floor+2]=0; //更新在该层楼出去电梯的人数
lift2.up=0;lift2.down=1;lift2.stay=0; //更新电梯的运动状态
floor[lift2.stay_in_floor+2].down=0; //更新电梯外的“上”按钮状态
}
}
}
else if (lift2.down)
{
if (lift2.stay_in_floor>-2)
lift2.stay_in_floor--; //更新电梯所在的楼层
floor[lift2.stay_in_floor+2].down=0; //更新电梯外的“上”按钮状态
lift2.inbutton_state[lift2.stay_in_floor+2]=0;//更新电梯内该层按钮状态
flag1=in_low;
flag2=!flag1&(lift2.stay_in_floor<lift1.stay_in_floor)&out_low;
flag3=!flag1&(lift2.stay_in_floor==lift1.stay_in_floor)&out_low&(lift1.up || lift1.stay);
flag4=!flag1&(lift2.stay_in_floor>lift1.stay_in_floor)&lift1.up&between_down;
flag5=!flag1&(lift2.stay_in_floor>lift1.stay_in_floor)&lift1.up&low;
flag6=!flag1&(lift2.stay_in_floor>lift1.stay_in_floor)&lift1.stay&between_near;
flag7=!flag1&(lift2.stay_in_floor>lift1.stay_in_floor)&lift1.down≬
flag8=!flag1&(lift2.stay_in_floor>lift1.stay_in_floor)&lift1.down&low_up;
flag_down=flag1 || flag2 ||flag3 ||flag4 ||flag5 ||flag6 ||flag7 ||flag8;
if (flag_down)
{
lift2.all_persons=lift2.all_persons-lift2.out_persons[lift2.stay_in_floor+2]+floor[lift2.stay_in_floor+2].down_persons;//更新电梯1内的总人数
t_inperson=floor[lift2.stay_in_floor+2].down_persons;
floor[lift2.stay_in_floor+2].down_persons=0; //更新在该层楼等待进入电梯的人数
t_outperson=lift2.out_persons[lift2.stay_in_floor+2];
lift2.out_persons[lift2.stay_in_floor+2]=0; //更新在该层楼出去电梯的人数
}
else if (!flag_down)
{
flag9=!flag1&(lift2.stay_in_floor>lift1.stay_in_floor)&lift1.up&!out_high&!between_down;
flag10=!flag1&(lift2.stay_in_floor>lift1.stay_in_floor)&lift1.stay&!out_high&!between_near;
flag11=!flag1&(lift2.stay_in_floor>lift1.stay_in_floor)&lift1.down&!out_high&!between&!low_up;
flag12=!flag1&(lift2.stay_in_floor==lift1.stay_in_floor)&lift1.up&!out_low;
flag13=!flag1&(lift2.stay_in_floor==lift1.stay_in_floor)&lift1.stay&!out_low&!out_high;
flag14=!flag1&(lift2.stay_in_floor==lift1.stay_in_floor)&lift1.down&!out_high;
flag15=!flag1&(lift2.stay_in_floor<lift1.stay_in_floor)&lift1.up&!out_low&!between&!high_down;
flag16=!flag1&(lift2.stay_in_floor<lift1.stay_in_floor)&lift1.stay&!out_low&!between_near&!high_down;
flag17=!flag1&(lift2.stay_in_floor<lift1.stay_in_floor)&lift1.down&!out_low&!between_up&!high;
flag_stay=flag9 || flag10 || flag11 || flag12 || flag13 || flag14 || flag15 || flag16 || flag17;
if (flag_stay)
{
lift2.all_persons=lift2.all_persons-lift2.out_persons[lift2.stay_in_floor+2];//更新电梯1内的总人数
t_outperson=lift2.out_persons[lift2.stay_in_floor+2];
lift2.out_persons[lift2.stay_in_floor+2]=0; //更新在该层楼出去电梯的人数
lift2.up=0;lift2.down=0;lift2.stay=1; //更新电梯的运动状态
}
else
{
lift2.all_persons=lift2.all_persons-lift2.out_persons[lift2.stay_in_floor+2]+floor[lift2.stay_in_floor+2].down_persons;//更新电梯1内的总人数
t_inperson=floor[lift2.stay_in_floor+2].up_persons;
floor[lift2.stay_in_floor+2].up_persons=0; //更新在该层楼等待进入电梯的人数
t_outperson=lift2.out_persons[lift2.stay_in_floor+2];
lift2.out_persons[lift2.stay_in_floor+2]=0; //更新在该层楼出去电梯的人数
lift2.up=1;lift2.down=0;lift2.stay=0; //更新电梯的运动状态
floor[lift2.stay_in_floor+2].up=0; //更新电梯外的“上”按钮状态
}
}
}
else
{
lift2.inbutton_state[lift2.stay_in_floor+2]=0;//更新电梯内该层按钮状态
flag1=in_high;
flag2=!flag1&(lift2.stay_in_floor>lift1.stay_in_floor)&out_high;
flag3=!flag1&(lift2.stay_in_floor==lift1.stay_in_floor)&out_high&lift1.down;
flag4=!flag1&(lift2.stay_in_floor<lift1.stay_in_floor)&lift1.up≬
flag5=!flag1&(lift2.stay_in_floor<lift1.stay_in_floor)&lift1.up&high_down;
flag6=!flag1&(lift2.stay_in_floor<lift1.stay_in_floor)&lift1.stay&between_near;
flag7=!flag1&(lift2.stay_in_floor<lift1.stay_in_floor)&lift1.down&between_up;
flag8=!flag1&(lift2.stay_in_floor<lift1.stay_in_floor)&lift1.down&high;
flag18=!flag1&floor[lift2.stay_in_floor+2].up;
flag_up=flag1 || flag2 ||flag3 ||flag4 ||flag5 ||flag6 ||flag7 ||flag8 || flag18;
if (flag_up)
{
lift2.all_persons=lift1.all_persons-lift2.out_persons[lift2.stay_in_floor+2]+floor[lift2.stay_in_floor+2].up_persons;//更新电梯1内的总人数
t_inperson=floor[lift2.stay_in_floor+2].up_persons;
floor[lift2.stay_in_floor+2].up_persons=0; //更新在该层楼等待进入电梯的人数
t_outperson=lift2.out_persons[lift2.stay_in_floor+2];
lift2.out_persons[lift2.stay_in_floor+2]=0; //更新在该层楼出去电梯的人数
floor[lift2.stay_in_floor+2].up=0; //更新电梯外的“上”按钮的状态
lift2.up=1;lift2.down=0;lift2.stay=0; //更新电梯的运动状态
}
else if (!flag_up)
{
flag9=!flag1&(lift2.stay_in_floor>lift1.stay_in_floor)&lift1.up&!out_high&!between_down;
flag10=!flag1&(lift2.stay_in_floor>lift1.stay_in_floor)&lift1.stay&!out_high&!between_near;
flag11=!flag1&(lift2.stay_in_floor>lift1.stay_in_floor)&lift1.down&!out_high&!between&!low_up;
flag12=!flag1&(lift2.stay_in_floor==lift1.stay_in_floor)&lift1.up&!out_low;
flag13=!flag1&(lift2.stay_in_floor==lift1.stay_in_floor)&lift1.stay&!out_low&!out_high;
flag14=!flag1&(lift2.stay_in_floor==lift1.stay_in_floor)&lift1.down&!out_high;
flag15=!flag1&(lift2.stay_in_floor<lift1.stay_in_floor)&lift1.up&!out_low&!between&!high_down;
flag16=!flag1&(lift2.stay_in_floor<lift1.stay_in_floor)&lift1.stay&!out_low&!between_near&!high_down;
flag17=!flag1&(lift2.stay_in_floor<lift1.stay_in_floor)&lift1.down&!out_low&!between_up&!high;
flag_stay=flag9 || flag10 || flag11 || flag12 || flag13 || flag14 || flag15 || flag16 || flag17;
if (!flag_stay)
{
lift2.all_persons=lift2.all_persons-lift2.out_persons[lift2.stay_in_floor+2]+floor[lift2.stay_in_floor+2].down_persons;//更新电梯1内的总人数
t_inperson=floor[lift2.stay_in_floor+2].down_persons;
floor[lift2.stay_in_floor+2].down_persons=0; //更新在该层楼等待进入电梯的人数
t_outperson=lift2.out_persons[lift2.stay_in_floor+2];
lift2.out_persons[lift2.stay_in_floor+2]=0; //更新在该层楼出去电梯的人数
lift2.up=0;lift2.down=1;lift2.stay=0; //更新电梯的运动状态
floor[lift2.stay_in_floor+2].down=0; //更新电梯外的“上”按钮状态
}
}
}
//下面，输出电梯的状态
Sleep(500); //再让print线程睡眠0.5秒，在这段时间里电梯不能响应电梯内、外的按钮
//在此加入清屏
//cls;
//clrscr();
SuspendThread(hprint); //挂起print线程
cout<<"电梯2目前在"<<lift2.stay_in_floor<<"层"<<endl; //输出电梯所在的楼层
if (lift2.all_persons>max_persons)
{
lift2.all_persons=max_persons;
Beep(800,1000);
}
else if (lift2.all_persons<0)
lift2.all_persons=0;
cout<<"电梯2内有"<<lift2.all_persons<<"人"<<endl; //输出电梯内的总人数
/* if (t_outperson>lift2.all_persons)
t_outperson=lift2.all_persons;
else
if (t_outperson<0)
t_outperson=0;
if (t_inperson>(max_persons-lift2.all_persons))
t_inperson=max_persons-lift2.all_persons;
else
if (t_inperson<0)
t_inperson=0;*/
if (t_outperson!=0 || t_inperson!=0)
cout<<"电梯2在本层出去"<<t_outperson<<"人，进入"<<t_inperson<<"人"<<endl;//输出电梯进、出人数情况
t_inperson=0;
t_outperson=0;
if (lift2.up)
cout<<"电梯2目前运动状态：向上"<<endl;
else if (lift2.down)
cout<<"电梯2目前运动状态：向下"<<endl;
else
cout<<"电梯2目前运动状态：暂停"<<endl;
cout<<endl;
ResumeThread(hprint); //恢复print线程
}
return 0;
}
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -