makefile.in

一个C语言写的快速贝叶斯垃圾邮件过滤工具

		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  doc/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --foreign  doc/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
uninstall-info-am:
install-man1: $(man1_MANS) $(man_MANS)
	@$(NORMAL_INSTALL)
	test -z "$(man1dir)" || $(mkdir_p) "$(DESTDIR)$(man1dir)"
	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.1*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
	  else file=$$i; fi; \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    1*) ;; \
	    *) ext='1' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
	  $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \
	done
uninstall-man1:
	@$(NORMAL_UNINSTALL)
	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.1*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    1*) ;; \
	    *) ext='1' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \
	  rm -f "$(DESTDIR)$(man1dir)/$$inst"; \
	done
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


distdir: $(DISTFILES)
	$(mkdir_p) $(distdir)/programmer $(distdir)/programmer/OS2 $(distdir)/programmer/RISC-OS/gsl $(distdir)/programmer/RISC-OS/src
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkdir_p) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-hook
check-am: all-am
check: check-am
all-am: Makefile $(MANS)
installdirs:
	for dir in "$(DESTDIR)$(man1dir)"; do \
	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am:

html: html-am

info: info-am

info-am:

install-data-am: install-man

install-exec-am:

install-info: install-info-am

install-man: install-man1

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-man

uninstall-man: uninstall-man1

.PHONY: all all-am check check-am clean clean-generic dist-hook \
	distclean distclean-generic distdir dvi dvi-am html html-am \
	info info-am install install-am install-data install-data-am \
	install-exec install-exec-am install-info install-info-am \
	install-man install-man1 install-strip installcheck \
	installcheck-am installdirs maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
	pdf-am ps ps-am uninstall uninstall-am uninstall-info-am \
	uninstall-man uninstall-man1


all: $(man_MANS) $(html_MANS)

#	     bogofilter.cf.example 
#	     strlcat.3 strlcpy.3

.1in.1:
	sed -e "s|[@]sysconfdir@|$(sysconfdir)|g" \
		-e "s|[@]bindir@|$(bindir)|g" <$< >$@ \
	|| { rm -f $@ ; exit 1 ; }

# same as .1in.1: above, but POSIX doesn't allow two targets on one line.
.htmlin.html:
	sed -e "s|[@]sysconfdir@|$(sysconfdir)|g" \
		-e "s|[@]bindir@|$(bindir)|g" <$< >$@ \
	|| { rm -f $@ ; exit 1 ; }

@ENABLE_XMLTO_TRUE@dist-hook:
@ENABLE_XMLTO_TRUE@	@if [ ! -f catalog ] ; then \
@ENABLE_XMLTO_TRUE@	echo ; echo "Warning: 'catalog' file not present; see 'README.validation'". ; echo ; else \
@ENABLE_XMLTO_TRUE@	case "$(MFLAGS)" in *s*) : ;; *) echo >&2 "validating $(HTML_DOCS)" ;; esac ; \
@ENABLE_XMLTO_TRUE@	( set -e ; for i in $(HTML_DOCS) ; do $(NSGMLS) -s $(srcdir)/$$i \
@ENABLE_XMLTO_TRUE@	    || { echo >&2 "ERROR: $$i does not validate." ; exit 1 ; } ; done ) ; \
@ENABLE_XMLTO_TRUE@	fi

# Use Perl to fix up br0ken 0xa0 characters that the XML DocBook style
# sheets emit instead of "\ " for roff or "&nbsp;" for HTML,
# respectively.
@ENABLE_XMLTO_TRUE@.xml.htmlin:
@ENABLE_XMLTO_TRUE@	xmllint --noout --postvalid $<
@ENABLE_XMLTO_TRUE@	if test -f $(srcdir)/$@ && test $(srcdir)/$@ -nt $< ; then \
@ENABLE_XMLTO_TRUE@	    cp $(srcdir)/$@ . ; else \
@ENABLE_XMLTO_TRUE@	  if xmlto html-nochunks $< ; then f=$@ ; mv $${f%%in} $@ ; else rm -f $@ ; exit 1 ; fi ; \
@ENABLE_XMLTO_TRUE@	  perl -pl -e "s|\xA0|&nbsp;|g" -i $@ || { rm -f $@ ; exit 1 ; } \
@ENABLE_XMLTO_TRUE@	fi

@ENABLE_XMLTO_TRUE@.xml.1in:
@ENABLE_XMLTO_TRUE@	xmllint --noout --postvalid $<
@ENABLE_XMLTO_TRUE@	if test -f $(srcdir)/$@ && test $(srcdir)/$@ -nt $< ; then \
@ENABLE_XMLTO_TRUE@	    cp $(srcdir)/$@ . ; else \
@ENABLE_XMLTO_TRUE@	if xmlto man $< ; then f=$@ ; mv $${f%in} $@ ; else rm -f $@ ; exit 1 ; fi ; \
@ENABLE_XMLTO_TRUE@	perl -pl -e "s|\xA0|\\ |g" -i $@ || { rm -f $@ ; exit 1 ; } \
@ENABLE_XMLTO_TRUE@	fi
@ENABLE_XMLTO_FALSE@dist-hook:
@ENABLE_XMLTO_FALSE@	true

@ENABLE_XMLTO_FALSE@.xml.1in:
@ENABLE_XMLTO_FALSE@	@echo 1>&2
@ENABLE_XMLTO_FALSE@	@echo 1>&2 "You need xmlto to build bogofilter documentation."
@ENABLE_XMLTO_FALSE@	@echo 1>&2
@ENABLE_XMLTO_FALSE@	@exit 1

@ENABLE_XMLTO_FALSE@.xml.htmlin:
@ENABLE_XMLTO_FALSE@	@echo 1>&2
@ENABLE_XMLTO_FALSE@	@echo 1>&2 "You need xmlto to build bogofilter documentation."
@ENABLE_XMLTO_FALSE@	@echo 1>&2
@ENABLE_XMLTO_FALSE@	@exit 1

.PHONY: check
check:
	@if echo '<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"><HTML><HEAD><TITLE></TITLE></HEAD><BODY><P></P></BODY></HTML>' | $(NSGMLS) -s 2>/dev/null; then \
	set +e ; fail=0 ; for i in $(HTML_DOCS) ; do if $(NSGMLS) -s $(srcdir)/$$i ; then echo PASS: $$i ; else echo FAIL: $$i: ; fail=1 ; fi ; done ; \
	else echo >&2 "*** Not validating HTML, nsgmls/HTML DTDs improperly installed ***" ; fi ; \
	if test "$$fail" = "1" ; then echo >&2 "*** HTML document invalid ***" ; false ; fi
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: