📄 pngwutil.c
字号:
}
#endif
#if defined(PNG_WRITE_tIME_SUPPORTED)
/* Write the tIME chunk. Use either png_convert_from_struct_tm()
* or png_convert_from_time_t(), or fill in the structure yourself.
*/
void /* PRIVATE */
png_write_tIME(png_structp png_ptr, png_timep mod_time)
{
#ifdef PNG_USE_LOCAL_ARRAYS
PNG_tIME;
#endif
png_byte buf[7];
png_debug(1, "in png_write_tIME\n");
if (mod_time->month > 12 || mod_time->month < 1 ||
mod_time->day > 31 || mod_time->day < 1 ||
mod_time->hour > 23 || mod_time->second > 60)
{
png_warning(png_ptr, "Invalid time specified for tIME chunk");
return;
}
png_save_uint_16(buf, mod_time->year);
buf[2] = mod_time->month;
buf[3] = mod_time->day;
buf[4] = mod_time->hour;
buf[5] = mod_time->minute;
buf[6] = mod_time->second;
png_write_chunk(png_ptr, (png_bytep)png_tIME, buf, (png_size_t)7);
}
#endif
/* initializes the row writing capability of libpng */
void /* PRIVATE */
png_write_start_row(png_structp png_ptr)
{
#ifdef PNG_USE_LOCAL_ARRAYS
/* arrays to facilitate easy interlacing - use pass (0 - 6) as index */
/* start of interlace block */
int png_pass_start[7] = {0, 4, 0, 2, 0, 1, 0};
/* offset to next interlace block */
int png_pass_inc[7] = {8, 8, 4, 4, 2, 2, 1};
/* start of interlace block in the y direction */
int png_pass_ystart[7] = {0, 0, 4, 0, 2, 0, 1};
/* offset to next interlace block in the y direction */
int png_pass_yinc[7] = {8, 8, 8, 4, 4, 2, 2};
#endif
png_size_t buf_size;
png_debug(1, "in png_write_start_row\n");
buf_size = (png_size_t)(PNG_ROWBYTES(
png_ptr->usr_channels*png_ptr->usr_bit_depth,png_ptr->width)+1);
/* set up row buffer */
png_ptr->row_buf = (png_bytep)png_malloc(png_ptr, (png_uint_32)buf_size);
png_ptr->row_buf[0] = PNG_FILTER_VALUE_NONE;
/* set up filtering buffer, if using this filter */
if (png_ptr->do_filter & PNG_FILTER_SUB)
{
png_ptr->sub_row = (png_bytep)png_malloc(png_ptr,
(png_ptr->rowbytes + 1));
png_ptr->sub_row[0] = PNG_FILTER_VALUE_SUB;
}
/* We only need to keep the previous row if we are using one of these. */
if (png_ptr->do_filter & (PNG_FILTER_AVG | PNG_FILTER_UP | PNG_FILTER_PAETH))
{
/* set up previous row buffer */
png_ptr->prev_row = (png_bytep)png_malloc(png_ptr, (png_uint_32)buf_size);
png_memset(png_ptr->prev_row, 0, buf_size);
if (png_ptr->do_filter & PNG_FILTER_UP)
{
png_ptr->up_row = (png_bytep )png_malloc(png_ptr,
(png_ptr->rowbytes + 1));
png_ptr->up_row[0] = PNG_FILTER_VALUE_UP;
}
if (png_ptr->do_filter & PNG_FILTER_AVG)
{
png_ptr->avg_row = (png_bytep)png_malloc(png_ptr,
(png_ptr->rowbytes + 1));
png_ptr->avg_row[0] = PNG_FILTER_VALUE_AVG;
}
if (png_ptr->do_filter & PNG_FILTER_PAETH)
{
png_ptr->paeth_row = (png_bytep )png_malloc(png_ptr,
(png_ptr->rowbytes + 1));
png_ptr->paeth_row[0] = PNG_FILTER_VALUE_PAETH;
}
}
#ifdef PNG_WRITE_INTERLACING_SUPPORTED
/* if interlaced, we need to set up width and height of pass */
if (png_ptr->interlaced)
{
if (!(png_ptr->transformations & PNG_INTERLACE))
{
png_ptr->num_rows = (png_ptr->height + png_pass_yinc[0] - 1 -
png_pass_ystart[0]) / png_pass_yinc[0];
png_ptr->usr_width = (png_ptr->width + png_pass_inc[0] - 1 -
png_pass_start[0]) / png_pass_inc[0];
}
else
{
png_ptr->num_rows = png_ptr->height;
png_ptr->usr_width = png_ptr->width;
}
}
else
#endif
{
png_ptr->num_rows = png_ptr->height;
png_ptr->usr_width = png_ptr->width;
}
png_ptr->zstream.avail_out = (uInt)png_ptr->zbuf_size;
png_ptr->zstream.next_out = png_ptr->zbuf;
}
/* Internal use only. Called when finished processing a row of data. */
void /* PRIVATE */
png_write_finish_row(png_structp png_ptr)
{
#ifdef PNG_USE_LOCAL_ARRAYS
/* arrays to facilitate easy interlacing - use pass (0 - 6) as index */
/* start of interlace block */
int png_pass_start[7] = {0, 4, 0, 2, 0, 1, 0};
/* offset to next interlace block */
int png_pass_inc[7] = {8, 8, 4, 4, 2, 2, 1};
/* start of interlace block in the y direction */
int png_pass_ystart[7] = {0, 0, 4, 0, 2, 0, 1};
/* offset to next interlace block in the y direction */
int png_pass_yinc[7] = {8, 8, 8, 4, 4, 2, 2};
#endif
int ret;
png_debug(1, "in png_write_finish_row\n");
/* next row */
png_ptr->row_number++;
/* see if we are done */
if (png_ptr->row_number < png_ptr->num_rows)
return;
#ifdef PNG_WRITE_INTERLACING_SUPPORTED
/* if interlaced, go to next pass */
if (png_ptr->interlaced)
{
png_ptr->row_number = 0;
if (png_ptr->transformations & PNG_INTERLACE)
{
png_ptr->pass++;
}
else
{
/* loop until we find a non-zero width or height pass */
do
{
png_ptr->pass++;
if (png_ptr->pass >= 7)
break;
png_ptr->usr_width = (png_ptr->width +
png_pass_inc[png_ptr->pass] - 1 -
png_pass_start[png_ptr->pass]) /
png_pass_inc[png_ptr->pass];
png_ptr->num_rows = (png_ptr->height +
png_pass_yinc[png_ptr->pass] - 1 -
png_pass_ystart[png_ptr->pass]) /
png_pass_yinc[png_ptr->pass];
if (png_ptr->transformations & PNG_INTERLACE)
break;
} while (png_ptr->usr_width == 0 || png_ptr->num_rows == 0);
}
/* reset the row above the image for the next pass */
if (png_ptr->pass < 7)
{
if (png_ptr->prev_row != NULL)
png_memset(png_ptr->prev_row, 0,
(png_size_t)(PNG_ROWBYTES(png_ptr->usr_channels*
png_ptr->usr_bit_depth,png_ptr->width))+1);
return;
}
}
#endif
/* if we get here, we've just written the last row, so we need
to flush the compressor */
do
{
/* tell the compressor we are done */
ret = deflate(&png_ptr->zstream, Z_FINISH);
/* check for an error */
if (ret == Z_OK)
{
/* check to see if we need more room */
if (!(png_ptr->zstream.avail_out))
{
png_write_IDAT(png_ptr, png_ptr->zbuf, png_ptr->zbuf_size);
png_ptr->zstream.next_out = png_ptr->zbuf;
png_ptr->zstream.avail_out = (uInt)png_ptr->zbuf_size;
}
}
else if (ret != Z_STREAM_END)
{
if (png_ptr->zstream.msg != NULL)
png_error(png_ptr, png_ptr->zstream.msg);
else
png_error(png_ptr, "zlib error");
}
} while (ret != Z_STREAM_END);
/* write any extra space */
if (png_ptr->zstream.avail_out < png_ptr->zbuf_size)
{
png_write_IDAT(png_ptr, png_ptr->zbuf, png_ptr->zbuf_size -
png_ptr->zstream.avail_out);
}
deflateReset(&png_ptr->zstream);
png_ptr->zstream.data_type = Z_BINARY;
}
#if defined(PNG_WRITE_INTERLACING_SUPPORTED)
/* Pick out the correct pixels for the interlace pass.
* The basic idea here is to go through the row with a source
* pointer and a destination pointer (sp and dp), and copy the
* correct pixels for the pass. As the row gets compacted,
* sp will always be >= dp, so we should never overwrite anything.
* See the default: case for the easiest code to understand.
*/
void /* PRIVATE */
png_do_write_interlace(png_row_infop row_info, png_bytep row, int pass)
{
#ifdef PNG_USE_LOCAL_ARRAYS
/* arrays to facilitate easy interlacing - use pass (0 - 6) as index */
/* start of interlace block */
int png_pass_start[7] = {0, 4, 0, 2, 0, 1, 0};
/* offset to next interlace block */
int png_pass_inc[7] = {8, 8, 4, 4, 2, 2, 1};
#endif
png_debug(1, "in png_do_write_interlace\n");
/* we don't have to do anything on the last pass (6) */
#if defined(PNG_USELESS_TESTS_SUPPORTED)
if (row != NULL && row_info != NULL && pass < 6)
#else
if (pass < 6)
#endif
{
/* each pixel depth is handled separately */
switch (row_info->pixel_depth)
{
case 1:
{
png_bytep sp;
png_bytep dp;
int shift;
int d;
int value;
png_uint_32 i;
png_uint_32 row_width = row_info->width;
dp = row;
d = 0;
shift = 7;
for (i = png_pass_start[pass]; i < row_width;
i += png_pass_inc[pass])
{
sp = row + (png_size_t)(i >> 3);
value = (int)(*sp >> (7 - (int)(i & 0x07))) & 0x01;
d |= (value << shift);
if (shift == 0)
{
shift = 7;
*dp++ = (png_byte)d;
d = 0;
}
else
shift--;
}
if (shift != 7)
*dp = (png_byte)d;
break;
}
case 2:
{
png_bytep sp;
png_bytep dp;
int shift;
int d;
int value;
png_uint_32 i;
png_uint_32 row_width = row_info->width;
dp = row;
shift = 6;
d = 0;
for (i = png_pass_start[pass]; i < row_width;
i += png_pass_inc[pass])
{
sp = row + (png_size_t)(i >> 2);
value = (*sp >> ((3 - (int)(i & 0x03)) << 1)) & 0x03;
d |= (value << shift);
if (shift == 0)
{
shift = 6;
*dp++ = (png_byte)d;
d = 0;
}
else
shift -= 2;
}
if (shift != 6)
*dp = (png_byte)d;
break;
}
case 4:
{
png_bytep sp;
png_bytep dp;
int shift;
int d;
int value;
png_uint_32 i;
png_uint_32 row_width = row_info->width;
dp = row;
shift = 4;
d = 0;
for (i = png_pass_start[pass]; i < row_width;
i += png_pass_inc[pass])
{
sp = row + (png_size_t)(i >> 1);
value = (*sp >> ((1 - (int)(i & 0x01)) << 2)) & 0x0f;
d |= (value << shift);
if (shift == 0)
{
shift = 4;
*dp++ = (png_byte)d;
d = 0;
}
else
shift -= 4;
}
if (shift != 4)
*dp = (png_byte)d;
break;
}
default:
{
png_bytep sp;
png_bytep dp;
png_uint_32 i;
png_uint_32 row_width = row_info->width;
png_size_t pixel_bytes;
/* start at the beginning */
dp = row;
/* find out how many bytes each pixel takes up */
pixel_bytes = (row_info->pixel_depth >> 3);
/* loop through the row, only looking at the pixels that
matter */
for (i = png_pass_start[pass]; i < row_width;
i += png_pass_inc[pass])
{
/* find out where the original pixel is */
sp = row + (png_size_t)i * pixel_bytes;
/* move the pixel */
if (dp != sp)
png_memcpy(dp, sp, pixel_bytes);
/* next pixel */
dp += pixel_bytes;
}
break;
}
}
/* set new row width */
row_info->width = (row_info->width +
png_pass_inc[pass] - 1 -
png_pass_start[pass]) /
png_pass_inc[pass];
row_info->rowbytes = PNG_ROWBYTES(row_info->pixel_depth,
row_info->width
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -