ieee.clo

IEEE conference 的投稿TEX模板

% -*- LaTeX -*-
%%% ====================================================================
%%%  @LaTeX-style-file{
%%%     author          = "Glenn Paulley",
%%%     version         = "1.0",
%%%     date            = "2002 April 16",
%%%     time            = "17:18:41",
%%%     filename        = "ieee.clo",
%%%     address         = "iAnywhere Solutions
%%%                        415 Phillip Street
%%%                        Waterloo, Ontario, Canada
%%%                        N2L 3X2",
%%%     telephone       = "[phone]",
%%%     FAX             = "[phone]",
%%%     checksum        = "",
%%%     email           = "[e-mail]",
%%%     codetable       = "ISO/ASCII",
%%%     keywords        = "",
%%%     supported       = "yes",
%%%     abstract        = "Contains the LaTeX style command definitions
%%%                        for typesetting details of the IEEE document class.",
%%%     docstring       = "The checksum field above contains a CRC-16
%%%                        checksum as the first value, followed by the
%%%                        equivalent of the standard UNIX wc (word
%%%                        count) utility output of lines, words, and
%%%                        characters.  This is produced by Robert
%%%                        Solovay's checksum utility.",
%%%  }
%%% ====================================================================
%% 
%% \CharacterTable
%%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
%%   Digits        \0\1\2\3\4\5\6\7\8\9
%%   Exclamation   \!     Double quote  \"     Hash (number) \#
%%   Dollar        \$     Percent       \%     Ampersand     \&
%%   Acute accent  \'     Left paren    \(     Right paren   \)
%%   Asterisk      \*     Plus          \+     Comma         \,
%%   Minus         \-     Point         \.     Solidus       \/
%%   Colon         \:     Semicolon     \;     Less than     \<
%%   Equals        \=     Greater than  \>     Question mark \?
%%   Commercial at \@     Left bracket  \[     Backslash     \\
%%   Right bracket \]     Circumflex    \^     Underscore    \_
%%   Grave accent  \`     Left brace    \{     Vertical bar  \|
%%   Right brace   \}     Tilde         \~}
\ProvidesFile{ieee.clo}
              [2002/04/16 v1.0 IEEE Document Class Options]
%
% list environments
%
\renewcommand\normalsize{%
   \@setfontsize\normalsize\@xpt\@xiipt%
   \abovedisplayskip 9\p@ \@plus2\p@ \@minus4\p@%
   \abovedisplayshortskip \z@ \@plus3\p@%
   \belowdisplayshortskip 5.5\p@ \@plus2.5\p@ \@minus2\p@%
   \belowdisplayskip \abovedisplayskip%
   \jot 0.6pt% for closer math spacing
   \setlength\parsep{0\p@ \@plus 1\p@}%
   \listparindent 1pc%
   \let\@listi\@listI%
}%
\normalsize%
\renewcommand\small{%
   \@setfontsize\small\@ixpt{11}%
   \abovedisplayskip 7.5\p@ \@plus3\p@ \@minus4\p@%
   \abovedisplayshortskip \z@ \@plus2\p@%
   \belowdisplayshortskip 4\p@ \@plus2\p@ \@minus2\p@%
   %% These settings are chosen primarly to typeset the bibliography;
   %% With IEEE, references are set in 9pt
   \def\@listi{\leftmargin\leftmargini%
               \topsep 3\p@ \@plus2\p@ \@minus2\p@%
               \parsep \z@ \@plus\p@%
               \itemsep \p@ \@plus\p@ \@minus\p@%
               \partopsep \z@ \@plus\z@ \@minus\p@%
               \listparindent 1pc%
    }%
}%
\renewcommand\footnotesize{%
   \@setfontsize\footnotesize\@viiipt{9}%
   \abovedisplayskip 6\p@ \@plus2\p@ \@minus3\p@%
   \abovedisplayshortskip \z@ \@plus\p@%
   \belowdisplayshortskip 3\p@ \@plus2\p@ \@minus2\p@%
   \def\@listi{\leftmargin\leftmargini%
               \topsep 3\p@ \@plus2\p@ \@minus\p@%
               \partopsep \p@ \@plus\z@ \@minus\p@%
               \listparindent 1pc%
               \parsep \z@ \@plus\p@%
               \itemsep \p@ \@plus\p@ \@minus\p@}%
   \belowdisplayskip \abovedisplayskip%
}%
\def\@listI{\leftmargin\leftmargini%
            \parsep \z@ \@plus2\p@%
            \partopsep \p@ \@plus\z@ \@minus\p@%
            \listparindent 1pc%
            \topsep 5\p@   \@plus2\p@ \@minus\p@%
            \itemsep 4\p@ \@plus\p@ \@minus\p@}%
\let\@listi\@listI%
\@listi%
\def\@listii{\leftmargin\leftmarginii%
              \labelwidth\leftmarginii%
              \advance\labelwidth-\labelsep%
              \listparindent 1pc%
              \topsep    3\p@ \@plus2\p@ \@minus\p@%
              \partopsep \p@ \@plus\z@ \@minus\p@%
              \parsep    \z@ \@plus\p@%
              \itemsep   3\p@ \@plus1\p@ \@minus\p@}%
\def\@listiii{\leftmargin\leftmarginiii%
              \labelwidth\leftmarginiii%
              \advance\labelwidth-\labelsep%
              \listparindent 1pc%
              \topsep    3\p@ \@plus\p@\@minus\p@%
              \parsep    \z@%
              \partopsep \p@ \@plus\z@ \@minus\p@%
              \itemsep   2\p@ \@plus\p@ \@minus\p@}%
\def\@listiv {\leftmargin\leftmarginiv%
              \labelwidth\leftmarginiv%
              \advance\labelwidth-\labelsep}%
\def\@listv  {\leftmargin\leftmarginv%
              \labelwidth\leftmarginv%
              \advance\labelwidth-\labelsep}%
\def\@listvi {\leftmargin\leftmarginvi%
              \labelwidth\leftmarginvi%
              \advance\labelwidth-\labelsep}%
%
% Hyphenate more often, to avoid widely-spaced words.
%
\hyphenpenalty = -100%
\pretolerance = 30%
\tolerance = 650%
\doublehyphendemerits=7000%
\finalhyphendemerits=4000%
%
% Change latex's default penalties for widow and club lines (since
% we're in twocolumn mode).
%
\clubpenalty=850%
\widowpenalty=950%
%
% Establish better inter-word spacing for the OT1 Computer Modern (cm) fonts. 
% We need to redefine \DeclareFontShape for each font series (see Latex 
% Companion, pp. 202) in OT1cmr.fd, OT1cmdh.fd, etc. Note that TeX loads
% the .tfm for each font only once, so this redeclaration will 
% set the spacing for additional fonts in the same family. Thus
% one cannot use \DeclareFontShape to affect a font temporarily;
% it's impact is global, and once the definition is changed, it's changed
% for each font in that family. To temporarily change wordspacing use
% the tex commands \spaceskip and \xspaceskip.
%
% First turn on frenchspacing (no added space at the end of sentences)
%
% Alter font definitions from latex2e font def files
%
% from OT1cmr.fd
%
\DeclareFontShape{OT1}{cmr}{m}{n}%
   {  <5> <6> <7> <8> <9> <10> <12> gen * cmr%
      <10.95> cmr10%
      <14.4>  cmr12%
      <17.28><20.74><24.88>cmr17}%
   {\fontdimen2\font=0.65\fontdimen2\font%
    \fontdimen4\font=0.8\fontdimen4\font}%
\DeclareFontShape{OT1}{cmr}{m}{sl}
    {%
      <5><6><7>cmsl8%
      <8> <9> gen * cmsl%
      <10><10.95>cmsl10%
      <12><14.4><17.28><20.74><24.88>cmsl12%
      }{\fontdimen2\font=0.65\fontdimen2\font%
        \fontdimen4\font=0.8\fontdimen4\font}%
\DeclareFontShape{OT1}{cmr}{m}{it}%
    {%
      <5><6><7>cmti7%
      <8>cmti8%
      <9>cmti9%
      <10><10.95>cmti10%
      <12><14.4><17.28><20.74><24.88>cmti12%
      }{\fontdimen2\font=0.65\fontdimen2\font%
        \fontdimen4\font=0.8\fontdimen4\font}%
\DeclareFontShape{OT1}{cmr}{m}{sc}%
    {%
      <5><6><7><8><9><10><10.95><12>%
      <14.4><17.28><20.74><24.88> cmcsc10%
      }{\fontdimen2\font=0.65\fontdimen2\font%
        \fontdimen4\font=0.8\fontdimen4\font}%
% Warning: please note that the upright shape below is
%          used for the \pounds symbol of LaTeX. So this
%          font definition shouldn't be removed.
%
\DeclareFontShape{OT1}{cmr}{m}{ui}%
   {%
      <5><6><7><8><9><10><10.95><12>%
      <14.4><17.28><20.74><24.88>cmu10%
      }{\fontdimen2\font=0.65\fontdimen2\font%
        \fontdimen4\font=0.8\fontdimen4\font}%
%
% From OT1cmss.fd
%
\DeclareFontShape{OT1}{cmss}{m}{n}%
     {%
      <5><6><7><8>cmss8%
      <9>cmss9%
      <10><10.95>cmss10%
      <12><14.4>cmss12%
      <17.28><20.74><24.88>cmss17%
      }{\fontdimen2\font=0.65\fontdimen2\font%
        \fontdimen4\font=0.8\fontdimen4\font}%
% Font undefined, therefore substituted
\DeclareFontShape{OT1}{cmss}{m}{it}%
      {<->sub*cmss/m/sl}%
      {\fontdimen2\font=0.65\fontdimen2\font%
       \fontdimen4\font=0.8\fontdimen4\font}%
\DeclareFontShape{OT1}{cmss}{m}{sl}
    {
      <5><6><7><8>cmssi8 <9> cmssi9
      <10><10.95>cmssi10
      <12><14.4>cmssi12
      <17.28><20.74><24.88>cmssi17
      }{\fontdimen2\font=0.65\fontdimen2\font%
        \fontdimen4\font=0.8\fontdimen4\font}%
%%%%%%% Font/shape undefined, therefore substituted
\DeclareFontShape{OT1}{cmss}{m}{sc}%
       {<->sub*cmr/m/sc}%
       {\fontdimen2\font=0.65\fontdimen2\font%
         \fontdimen4\font=0.8\fontdimen4\font}%
%%%%%%%% semibold condensed series
\DeclareFontShape{OT1}{cmss}{sbc}{n}%
     {%
      <5> <6> <7> <8> <9> cmssdc10%
       <10> <10.95> <12> <14.4> <17.28> <20.74> <24.88>cmssdc10%
       }{\fontdimen2\font=0.65\fontdimen2\font%
         \fontdimen4\font=0.8\fontdimen4\font}%
%
%%%%%%%%% bold extended series
\DeclareFontShape{OT1}{cmss}{bx}{n}%
     {%
      <5> <6> <7> <8> <9> cmssbx10%
      <10> <10.95> <12> <14.4> <17.28> <20.74> <24.88> cmssbx10%
      }{\fontdimen2\font=0.65\fontdimen2\font%
        \fontdimen4\font=0.8\fontdimen4\font}%
%
% OT1cmtt (typewriter) we leave alone......
%
\endinput
%% 
%% End of file `ieee.clo'.