leds.asm

tm320lf2407测试程序

;*********************************************************************
; File Name:	 leds.asm
; Target System: C24x Evaluation Board
;
; Description:	 This sample program helps you get familiar with
;                manipulating the I/O mapped LEDS (DS1-DS8) on the
;                F240 EVM Development Board
;
; Revision:      1.00
;
;*********************************************************************
		.include	f240regs.h

;---------------------------------------------------------------------
; I/O Mapped EVM Register Declarations
;---------------------------------------------------------------------
DAC0     	.set    0000h		;DAC Channel 0 Register
DAC1     	.set    0001h		;DAC Channel 1 Register
DAC2     	.set    0002h		;DAC Channel 2 Register
DAC3     	.set    0003h		;DAC Channel 3 Register
DAC_UPDATE  .set    0004h		;DAC Update Register
SWITCHES	.set    0008h		;DIP Switch Register
LEDS      	.set    000Ch		;LEDs Register
temp		.set	  8000h

;---------------------------------------------------------------------
; Variable Declarations for on chip RAM Blocks
;---------------------------------------------------------------------
		.bss	GPR0,1		;General purpose register.
		.bss	LED_STATUS,1	;LED Status Register
		.bss	RPT_NUM,1		;RPT value, used in mS_DELAY 
		.bss	mSEC,1		;Delay value, used in mS_DELAY 

;---------------------------------------------------------------------
; Vector address declarations
;---------------------------------------------------------------------
		.sect	".vectors"

RSVECT	B    START		; Reset Vector
INT1	  	B    PHANTOM	; Interrupt Level 1
INT2	  	B    PHANTOM	; Interrupt Level 2
INT3	  	B    PHANTOM	; Interrupt Level 3
INT4	  	B    PHANTOM	; Interrupt Level 4
INT5	  	B    PHANTOM	; Interrupt Level 5
INT6	  	B    PHANTOM	; Interrupt Level 6
RESERVED  	B    PHANTOM	; Reserved
SW_INT8   	B    PHANTOM	; User S/W Interrupt
SW_INT9   	B    PHANTOM	; User S/W Interrupt
SW_INT10  	B    PHANTOM	; User S/W Interrupt
SW_INT11  	B    PHANTOM	; User S/W Interrupt
SW_INT12  	B    PHANTOM	; User S/W Interrupt
SW_INT13  	B    PHANTOM	; User S/W Interrupt
SW_INT14  	B    PHANTOM	; User S/W Interrupt
SW_INT15  	B    PHANTOM	; User S/W Interrupt
SW_INT16  	B    PHANTOM	; User S/W Interrupt
TRAP	  	B    PHANTOM	; Trap vector
NMINT	  	B    PHANTOM	; Non-maskable Interrupt
EMU_TRAP  	B    PHANTOM	; Emulator Trap
SW_INT20  	B    PHANTOM	; User S/W Interrupt
SW_INT21  	B    PHANTOM	; User S/W Interrupt
SW_INT22  	B    PHANTOM	; User S/W Interrupt
SW_INT23  	B    PHANTOM	; User S/W Interrupt


;=====================================================================
; M A I N   C O D E  - starts here
;=====================================================================

		.text
		NOP
START:	SETC	INTM    			;Disable interrupts
		SPLK	#0000h,IMR			;Mask all core interrupts
		LACC	IFR				;Read Interrupt flags
		SACL	IFR				;Clear all interrupt flags

		CLRC	SXM				;Clear Sign Extension Mode
		CLRC	OVM				;Reset Overflow Mode
		CLRC	CNF				;Config Block B0 to Data mem

		LDP   #00E0h			;DP for addresses 7000h-707Fh
		SPLK  #00BBh,CKCR1		;CLKIN(OSC)=10MHz,CPUCLK=20MHz
		SPLK  #00C3h,CKCR0		;CLKMD=PLL Enable,SYSCLK=CPUCLK/2
		SPLK  #40C0h,SYSCR		;CLKOUT=CPUCLK

		SPLK	#006Fh, WDCR		;Disable WD if VCCP=5V (JP5 in pos. 2-3)
		KICK_DOG				;Reset Watchdog

		SPLK  #0h,GPR0			;Set wait state generator for:
		OUT   GPR0,WSGR         	;Program Space, 0 wait states
							;Data Space, 0 wait states
							;I/O Space, 0 wait states

		SPLK	#1h,LED_STATUS		;Set bit 0 in LED_STATUS
		OUT	LED_STATUS,LEDS		;Turn on I/O LED-1
		SPLK	#500,mSEC			;Set mSEC for a 50ms delay
		LAR	AR0,#6h			;Load AR0 with 6 for loop counter


;=====================================================================
; Shift Contents of LED_STATUS register to the left by 1 bit and write
; new value to the I/O Mapped LEDS register.
;=====================================================================
SHIFT_LEFT:	
		CALL	mS_DELAY			;Generate a 50ms delay
		KICK_DOG				;Reset WD if not disabled
		MAR	*,AR0				;Set ARP = AR0
		LACC	LED_STATUS			;Load ACC w/ LED_STATUS
		SFL					;Shift LED_STATUS left by 1 bit
		SACL	LED_STATUS			;Store new LED_STATUS value
		OUT	LED_STATUS,LEDS		;Write new value to LEDS reg
		BANZ	SHIFT_LEFT			;Branch if AR0 >= 0
		LAR	AR0,#6h			;Reset AR0 = 6

;=====================================================================
; Shift Contents of LED_STATUS register to the right by 1 bit and 
; write new value to the I/O Mapped LEDS register.
;=====================================================================
SHIFT_RIGHT:
		CALL	mS_DELAY			;Generate a 50ms delay
		KICK_DOG				;Reset WD if not disabled
		MAR	*,AR0				;Set ARP = AR0
		LACC	LED_STATUS			;Load ACC w/ LED_STATUS
		SFR					;Shift LED_STATUS right by 1 bit
		SACL	LED_STATUS			;Store new LED_STATUS value
		OUT	LED_STATUS,LEDS		;Write new value to LEDS reg
		BANZ	SHIFT_RIGHT			;Branch if AR0 >= 0
		LAR	AR0,#6h			;Reset AR0 = 6
		B	SHIFT_LEFT			;Branch to SHIFT_LEFT

;=====================================================================
; Routine Name: 	mS_DELAY
; Originator: 	Scott Roller
;
; Description:	Produces a multiple of 0.1mS delays using the RPT 
;			instruction. The Delay produced is based on the 
;			value loaded in mSEC (i.e. Delay = mSEC x 0.1mS).
;			Indirect addressing is used to count the number
;			of times the delay loop is repeated.
;
; Calling Convention:
;
; Variables			on Entry			on Exit
; --------------------------------------------------------------------
;   DP			XX				0x0000
;   ARP			XX				AR1
;   ACC			XX				XX
;   mSEC	     		value in 0.1 mS		un-touched
; --------------------------------------------------------------------
;=====================================================================
mS_DELAY:	LDP	#0h				;DP-->0000h-007Fh
		LACC	#2000				;Load RPT value to GPR0
		SACL	RPT_NUM
		LAR	AR1,mSEC			;Set AR0 to generate a
		MAR	*,AR1				;(AR0*0.1)mSEC delay loop

mS_LOOP:	LDP	#0h				;DP-->0000h-007Fh
		RPT	RPT_NUM			;2000 cycles = 0.1mS
		NOP					;1 cycle
		BANZ	mS_LOOP			;Repeat DELAY_LOOP
		RET					;Return from DELAY SR

;=====================================================================
; I S R  -  PHANTOM
;
; Description:	Dummy ISR, used to trap spurious interrupts.
;
; Modifies:	Nothing
;
; Last Update:	16 June 95
;=====================================================================
PHANTOM 	KICK_DOG				;Resets WD counter
		B	PHANTOM